|
SKINZ PROTECTIVE GEAR RISER HANDLEBARS
2" or 4" rise allows for more comfortable riding position. Chromoly steel is strong and lightweight. Also available with hooks. Accommodates bar ends and fits most snowmobiles. Measure 28" wide, 5" center width, with 8° up and 8° back rise and rake angles. Powder-coat finish available in black, blue or red. NOTE: Check cable and wire length before ordering. Cables and wires may need to be longer on some models. 
|
$92.91
chrome-addiction.com
|
Top stores
chrome-addiction.com
$92.91
|
|
Risers, 5" Tall, 1 1/2” Pullback, For 1" Handlebars, Chrome Finish, Pair
These are the Lightning Performance Products 5" tall Euro Style risers. Steel construction with triple-plated show chrome. For 1” handlebars in 3”, 4” or 5” rise; with 1.5” pullback. Drilled and tapped for 1/2”-13 mounting bolts. Sold in pairs.
|
$111.24
wpsracing.com
|
Top stores
wpsracing.com
$111.24
|
|
ROX Pivoting Handlebar Risers
Dual rotation points makes Rox Risers selectively adjustable forward and back, allowing you to fit your snowmobile handlebars to your preferred riding position. With the two piece design, Rox Pivoting Risers will install on virtually any snowmobile that has clamps to hold handlebars, making them incredibly universal. Available from 2" through 5" heights. Price Depends on Rise. Tested for maximum strength and durability. 6061 T6 aluminum. 7/8" stem clamp. Aluminum Model.
|
$69.95
Korkys.com
|
Top stores
Korkys.com
$69.95
|
|
HANDLEBAR SUNLT MTB 5in RISE 31.8 ALY BK
o. Mtn Riser. 31.8. 27.75". 5". -. Blk. Alloy. Polished.
|
$45.98
BikePartsUSA
|
Top stores
BikePartsUSA
$45.98
|
|
Carlini Design Super Sweep Handlebars 1.25 Inch - 5 Inch Rise OPEN BOX SPECIAL
Super Sweep T-bars have greater pullback for a more raked appearance - 2 1/2" more pullback than Clean Sweep bars. Ideal for stock or custom bikes under 38 degrees of rake. Same crossbar as Clean Sweep, just has risers with more pullback than Clean Sweep.
|
$179.95
|
Top stores
phatperformanceparts.com
$179.95
|
|
LA Choppers 5.5 Inch Smooth Cap Handlebar Risers with 1.75 Inch Pullback
Cateye-shaped riser caps with radius edges provide cool, clean style. No visible hardware for a super custom look. Kit includes risers, caps and cap mounting hardware. 1 inch diameter handlebars. Smooth cap style. 5-1/2 inch rise with 1-3/4 inch pullback. Mount hole tapped 1/2 inch x 13 for use with H-D stock riser bolts. Hand polished and beautifully chrome finished. T-6061 billet aluminum. Includes a riser adapter kit for metric applications. Sold in pairs. Made in USA.
|
$163.76
motorcyclecenter.com
|
Top stores
motorcyclecenter.com
$163.76
|
|
Drag Specialties Handlebars - 1 Inch T-Bars 8 Inch Rise Dimpled & Drilled
Note: Handlebars ONLY fit 3.5" riser spacing typically found on Harley Davison, also fit some Kawasaki models that can accept 1/2" bolts!
|
$119.95
|
Top stores
phatperformanceparts.com
$119.95
|
|
LA Choppers 5.5 Inch Mohawk Cap Hefty Handlebar Risers with 1.75 Inch Pullback
Cateye-shaped riser caps with radius edges provide cool, clean style. No visible hardware for a super custom look. Kit includes risers, caps and cap mounting hardware. 1-1/4 inch diameter handlebars. Mohawk cap style. 5-1/2 inch rise with 1-3/4 inch pullback. Mount hole tapped 1/2 inch x 13 for use with H-D stock riser bolts. Hand polished and beautifully chrome finished. T-6061 billet aluminum. For use with LA Choppers Hefty handlebars. Includes a riser adapter kit for metric applications...
|
$167.96
motorcyclecenter.com
|
Top stores
motorcyclecenter.com
$167.96
|
|
V-Factor Fat Bob Style Billet Aluminum Handlebar Risers
Description 5" rise. Forged 6061-T6 billet aluminum risers and clamp for 1 1/4" diameter handlebars. Show chrome finish. Replaces HD # 59783-08 and 56898-08 Fits: Fat Bob FXDF 2008/Later & custom use. Part numbers: 59783-08 and 56898-08 Fits years: 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006...
|
$72.45
hognutz.com
|
Top stores
hognutz.com
$72.45
|
|
LA Choppers 5.5 Inch Mohawk Cap Handlebar Risers with 1.75 Inch Pullback
Cateye-shaped riser caps with radius edges provide cool, clean style. No visible hardware for a super custom look. Kit includes risers, caps and cap mounting hardware. 1 inch diameter handlebars. Mohawk cap style. 5-1/2 inch rise with 1-3/4 inch pullback. Mount hole tapped 1/2 inch x 13 for use with H-D stock riser bolts. Hand polished and beautifully chrome finished. T-6061 billet aluminum. Includes a riser adapter kit for metric applications. Sold in pairs. Made in USA.
|
$167.96
motorcyclecenter.com
|
Top stores
motorcyclecenter.com
$167.96
|
|
|
LA Choppers 5.5 Inch Smooth Cap Hefty Handlebar Risers with 1.75 Inch Pullback
Cateye-shaped riser caps with radius edges provide cool, clean style. No visible hardware for a super custom look. Kit includes risers, caps and cap mounting hardware. 1-1/4 inch diameter handlebars. Smooth cap style. 5-1/2 inch rise with 1-3/4 inch pullback. Mount hole tapped 1/2 inch x 13 for use with H-D stock riser bolts. Hand polished and beautifully chrome finished. T-6061 billet aluminum. For use with LA Choppers Hefty handlebars. Includes a riser adapter kit for metric applications...
|
$163.76
motorcyclecenter.com
|
Top stores
motorcyclecenter.com
$163.76
|
|
|
LA Choppers 5.5 Inch Smooth Cap Handlebar Risers with 1.75 Inch Pullback - Black
Cateye-shaped riser caps with radius edges provide cool, clean style. No visible hardware for a super custom look. Kit includes risers, caps and cap mounting hardware. 1 inch diameter handlebars. Smooth cap style. 5-1/2 inch rise with 1-3/4 inch pullback. Mount hole tapped 1/2 inch x 13 for use with H-D stock riser bolts. Hand polished and Gloss Black Powdercoat. T-6061 billet aluminum. Includes a riser adapter kit for metric applications. Sold in pairs. Made in USA.
|
$163.76
motorcyclecenter.com
|
Top stores
motorcyclecenter.com
$163.76
|
|
Lightning Performance 5 in. Euro Style Risers LPHBR5
Steel risers for 1 in. handlebars Triple-plated show chrome finish 5 in. rise, also available in 3 in. or 4 in. rise Up to 1.5 in. pullback Risers are drilled and tapped for 1/2 in.-13 mounting bolts
|
$107.09
|
Top stores
Dennis Kirk
$107.09
|
|
Motorcycle Paughco Hollywood Springer Style Handlebars
Styled after the Hollywood Springer handlebars, but designed for use with conventional risers These 1" diameter bars measure 36" end-to-end and have a 5" rise Like their Springer counterparts, they don't have any dimples for control wiring, but have exit holes instead
|
$207.99
|
Top stores
J&P Cycles
$207.99
|
|
1¼" Big Johnson Handlebars
* Works with all stock cables, lines and controls. * Direct replacement for stock bars with 1 riser clamp diameter. * 13 inches of pullback, reducing reach and improving back position. * Lower grip point, relaxes shoulders for added comfort. * Realigned wrist position reduces or eliminates hand numbness. * Does not interfere with stock mirrors. * Diameter: 1-1/4", Width: 38, Rise: 5", Pullback: 13. * Diamond-knurled for OEM risers on 3-1/2" centers to prevent slippage. * Does not accept...
|
$200.65
westendmotorsports.com
|
Top stores
westendmotorsports.com
$200.65
|
|
Lightning Performance Euro Style Risers
Discount-Motorcycle-Parts.net Handlebar Risers Lightning Performance Euro Style Risers. - DMPLPHBR-x 1969 Lightning Performance Euro Style Risers are steel risers made for 1" handlebars. Made with a triple plated show chrome finish. Come in a 3, 4, or 5" rise with up to 1.5" of pullback. These risers are tapped and drilled for 1/2" -13 mounting bolts. Please choose the appropriate option before ordering. 104.99 USD Discount-Motorcycle-Parts.net http://www.discount-motorcycle -parts.net/ In stock...
|
$104.99
discount-motorcycle-parts.net
|
Top stores
discount-motorcycle-parts.net
$104.99
|
|
Pyramid Mountain Bike Riser Handlebar, 5" Rise, Alloy, Silver
27 3/4" wide. 5" Rise. 1" diameter at center. Alloy. Silver.
|
$20.99
niagaracycle.com
|
Top stores
niagaracycle.com
$20.99
|
|
Fly Handlebar Risers
* Dual pivoting adjustability allows you to position handlebars where you want them. * Available in fixed 2", 3", 4", 5", 6", 7" and 8" heights. * Available in adjustable 4" - 5 3/4" or 5 3/4" - 8 1/4". * Risers come with custom inserts that allows risers to fit stock 7/8" handlebars & oversize 1 1/8" handlebars. * 6061 T-6 Aircraft aluminum resists bending or twisting. * For use with pivot style steering posts or steering posts with adapter tubes. * Rise is measured from center to center....
|
$59.99
sledsolutions.com
|
Top stores
sledsolutions.com
$59.99
|
|
Klock Werks: 1-1/4 Inch Perfecta Handlebars - Black
* A perfect choice in 1-1/4 inch handlebars. * 5-1/4 inch clamping area for use with most 1 inch style risers and clamps (except FXSTS/FLSTS). * All are pre-drilled for internal wiring. * Made in the U.S.A. * End Rise: 13 inches. * Width 37.75 inches. * Center Width: 10 inches. * Pullback: 5 inches.
|
$199.95
RealHog.com
|
Top stores
RealHog.com
$199.95
|
|
Pyramid Mountain Bike Riser Handlebar, 5" Rise, Alloy, Black
27 3/4" Wide. 5" Rise. Alloy. Black. 1" diameter at center.
|
$19.44
niagaracycle.com
|
Top stores
niagaracycle.com
$19.44
|
|
Paughco Hollywood Black Handlebars
Bar measures 36 inches from end to end, with a 5 inch rise and a 7 inch pullback. 1 inch Diameter. Includes exit holes instead of dimples. Use with conventional risers. Paughco Part# H35B.
|
$177.20
motorcyclecenter.com
|
Top stores
motorcyclecenter.com
$177.20
|
|
Pyramid Mountain Bike Riser Handlebar, 5" Rise, Steel, Chrome Plated
27 1/2 " wide. 5" Rise. 1" (25.4 mm) diameter at center. Steel. Chrome Plated.
|
$5.93
niagaracycle.com
|
Top stores
niagaracycle.com
$5.93
|
|
|
Klock Werks: 1-1/4 Inch Perfecta Handlebars - Black - (for Throttle-by-Wire Harleys)
* A perfect choice in 1-1/4 inch handlebars. * 5-1/4 inch clamping area for use with most 1 inch style risers and clamps (except FXSTS/FLSTS). * All are pre-drilled for internal wiring. * Made in the U.S.A. * End Rise: 13 inches. * Width 37.75 inches. * Center Width: 10 inches. * Pullback: 5 inches.
|
$139.86
RealHog.com
|
Top stores
RealHog.com
$139.86
|
|
Replica 5-1/2 inch Flander Riser Set Chrome for 1 inch handlebars
Replica 5-1/2 inch Flander Riser Set Chrome for 1 inch handlebars
|
$132.21
biker-direct.com
|
Top stores
biker-direct.com
$132.21
|
|
MTB, 5in. Rise, Alloy, Black, Handle Bar
o. Mtn Riser. 25.4. 27.75". 5". -. Blk. Alloy. Polished.
|
$37.18
BikePartsUSA
|
Top stores
BikePartsUSA
$37.18
|
|
Mtb, 5 Inch Rise, Steel, Black, Handle Bar
Mtn Riser. 25.4. 27.5". 5". -. Blk. Steel. Painted.
|
$8.30
BikePartsUSA
|
Top stores
BikePartsUSA
$8.30
|
|
Pyramid Mtb, 5in. Rise, Alloy, Black, Handle Bar
Product Info Type Mtn Riser Bar Clamp 25.4 Width 27.75" Rise 5" Bend/Sweep - Color Blk Material Alloy Finish Polished
|
$1,859.60
BikePartsUSA
|
Top stores
BikePartsUSA
$1,859.60
|
|
MTB, 5 Inch Rise, Alloy, Silver, Handle Bar
o. Mtn Riser. 25.4. 27.75". 5". -. Sil. Alloy. Polished.
|
$37.18
BikePartsUSA
|
Top stores
BikePartsUSA
$37.18
|
|
MTB, 5 Inch Rise, Steel, Chrome Plated, Handlebar
Mtn Riser. 25.4. 27.5". 5". -. Chrome. Steel. Chrome.
|
$10.90
BikePartsUSA
|
Top stores
BikePartsUSA
$10.90
|
|
|
Baron Custom 1¼" Big Johnson Handlebars for '08-Up FLHT/FLHR/FLHX/FLTR -Black
* Works with all stock cables, lines and controls. * Direct replacement for stock bars with 1 riser clamp diameter. * 13 inches of pullback, reducing reach and improving back position. * Lower grip point, relaxes shoulders for added comfort. * Realigned wrist position reduces or eliminates hand numbness. * Does not interfere with stock mirrors. * Diameter: 1-1/4", Width: 38, Rise: 5", Pullback: 13. * Diamond-knurled for OEM risers on 3-1/2" centers to prevent slippage. * Works with FL...
|
$200.65
westendmotorsports.com
|
Top stores
westendmotorsports.com
$200.65
|
