328 results for "4-input by 1-output Programmable Switcher" between $10.00 and $2,000.00

Connects Multiple Hdmi Sources To 1 Hdmi Display Supports Resolutions Up To 1080P Hdcp Compliant Includes Remote To Switch Between Sources 4 Inputs, 1 Output

Panel Tachometer, 4 To 20 Madc Output, 5 To 999,990 Rpm, Accuracy +/-0.0015 Percent, Resolution Up To 0.001 Rpm, 5 Digit Led Display, Power Requirement 100 To 240 Vac, 50/60 Hz, Programmable Pulse Per Revolution Input, Includes Instructions, Manufacturers Warranty Length 1 Year

Suitable For 1080p and Lower Video Formats. Support Digital Video and Audio By HDMI Standard 1.3 Specification. HDMI-HDMI Cable Can Be Used To Connect The Inputs Or Output. Inputs Can Be Selected From Wireless IR Remote Controller (Included) Or Controls On The Front Panel. Sold as : Unit.

4 X 1 Manual or IR remote controlled VGA switcher. Max Input Video Level 1.5V p-p. Video Bandwidth 250 MHZ. Video Resolutions up to 1920 x 1440. Connectors: Input\Output HD-DB15 Female Jacks. LED selection indicators. Auto-scan Function adjusts input scan from 5 - 30 seconds. Skips un-active video ports. DC Power 9Vdc 300ma Power supply included. Remote control included. Dimensions: L-3.0" x W-8.0" x H-1.6".

The Crosspoint 32 matrix video switching system is the perfect solution for mid-sized CCTV installations requiring 32 cameras or fewer. Built with flexibility in mind, the KTD-348 master switcher can be ordered in a number of configurations, from 16-input by 4-output to 32-input by 4- or 8-output. Or you can order the 16 x 4 base model and then add expansion accessories later. FEATURES: Expandable matrix switching capability: from 16 x 4 to 32 x 8 Programmable alarm inputs...

High Definition HDMI 4 Source Input and 1 Source O digital-media-adapters KVM Cat5 Receiver KVM-9007

"The HDMI switch is designed to allow your Multiple High Definition Audio & Video equipment to a HD Ready TV using concise space saving and time saving Technology. The HDMI switch allows more than one HDMI devices to share one HDMI compatible monitor, HDTV or projector.

Four data inputs are available which are used to supply the 4-bit word to be stored. Location of the word is determined by the write-address inputs A and B in conjunction with a write-enable signal. Data applied at the inputs should be in its true form. That is, if a high-level signal is desired from the output, a high level is applied at the data input for that particular bit location. THe latch inputs are arranged so that new data will be accepted only if both internal address gate inputs are high...

The TruLink video switcher/extender w/audio is able to broadcast the video & audio outputs from 4 computers to one monitor/projector & speaker set.

Suitable for 1080p and Lower Video formats. Support digital video and audio by HDMI standard 1.3 Specification. HDMI-HDMI cable can be used to connect the inputs or output. Inputs can be selected from button on the front panel. Sold as : Unit.

Diseqc 2.0 switch. 4 input, 1 output. Made by Hygeia

Knoll HDMI switchers are used to switch from two to four HDMI sources into one display or switcher or distribution amp. The output is fully HDCP compliant and can pass HDMI 1.3.

Inputs / Outputs: 8-port, single-link DVI-D, 24-pin female. Routing: 32x32 non-blocking - any input(s) to any output(s). Resolution: 640x480 to 1920x1200 and 2048x1080. Bit rate: Supports up to 1.65 Gbit/s per color. Cable Equalization: 40db @ 825 MHz / automatic correction. Re-clocking: All outputs are re-clocked for minimum jitter. EDID memory: 50 factory preset, and 50 user programmable. RS232 / 422: D-sub 9-pin female, 9600 Baud for Rx / Tx. LAN: RJ-45, Ethernet 10/100 Base-T Auto-Sensing...

Switches 4 sources into 1 destination. Supports up to 1080p resolution. Front panel or remote switching. HDCP compliant. Low cost solution for home theater integration. Plug-and-play, no software installation. Includes remote Item UPC: 9999999999999.

* DC Power 9Vdc 300ma. * Max Input Video Level 1.5V p-p. * Video Bandwidth 250 MHZ. * Video Resolutions up to 1920 x 1440. * Input\Output HD-DB15 Female Jacks. * L.E.D's Online, Selected.

The HDMI switch is designed to allow your Multiple High Definition Audio & Video equipment to a HD Ready TV using concise space saving and time saving Technology. The HDMI switch allows more than one HDMI devices to share one HDMI compatible monitor, Suitable For 1080p and Lower Video Formats. Support Digital Video and Audio by HDMI Standard 1.3 Specification HDMI-HDMI Cable Can Be Used To Connect The Inputs Or Output. Inputs Can Be Selected From Wireless IR Remote Controller (Included) Or Controls...

Atlona Pro5 11 input 2 mirrored outputs Switcher/Scaler is designed to create a better, easier, classroom or boardroom presentation. Supporting resolutions of 640x480 up to 1920x1200 and 480i up to 1080p, scale any source to your display’s resolution. Control the AT-LINE-PRO5 by remote, face panel, or RS-232, allowing you to set up the command system easiest for you.

Connects 3 HDMI, 3 VGA and 3 component or Composite with Stereo Audio devices (DVD players and satellite set tops, etc.) to one output of the same technology. The HDMI ports provide fixed 8 db input equalization and 3 db output de-emphasis to compensate HDMI cable for up to 17M. 12 input ports (Component RCA, VGA, HDMI, A/V RCA) to 4 output ports (Component RCA, HDMI, VGA & A/V RCA). HDMI -19 pin HDMI jack VGA - HD 15 jack Component video - 3 RCA jacks (Red, Blue & Green) A/V RCA (Yellow, White...