35 results for "3/8in. Mortising Chisel | Chisels" between $2.00 and $100.00

Unlike the Amana mortising chisels sets we sell, these CMT bits offer a 3/4" shank which is popular on floor standing mortising machines and some benchtop models. Made from high speed steel, they offer excellent performance and long life.

For making square mortises in one stroke, and oblong mortises with each succeeding stroke. 4” blade, 5-1/2” overall length. 1/4” and 5/16” sizes have reinforced blade. Chisel and bits sold seperately

While many European made chisels have fractional sizes printed on the blade, a large percentage of them are actually made to the roughly equivalent metric size. Quite uniquely, MHG is making chisels for the American market in true imperial (fractional) sizes. So, rather than having to take the time normally consumed by compensating for the difference betweens fractions and millimeters, you can proceed with your work with less fuss. To our knowledge these are the only German made chisels offered this...

Delta 3/8" Mortising Chisel 17-910 Delta 3/8" Mortising Chisel

These Premium Mortising Chisels and bits are precision machined and factory sharpened for perfect results right out of the box. We tested just about every name brand Mortising Chisel on the market including some from Europe and tested them side by side against these Japanese ones. It is our opinion, that there isn’t a Mortising Chisel on the market today that is better in quality and performance than these. Expensive? Yes. Worth it? Absolutely! Each hollow Mortising Chisel has a 3/4" O.D. shank to...

Senco X06NRA 25 ga (.020 x .086) 1in. Crown x 3/8in. Sharp Chisel, Bright Basic Std Tensile, Plain Sencor (5 M per Box)

Senco M17BAB 18 ga (.044 x .050) 3/8in. Crown x 1-1/2in. Chisel, Galv Std Tensile, Sencote (10 M per Box)

Mortise chisels and bits are replacement bits for the Delta Mortising Attachment and other similar units. Each includes a chisel and bit.

I use these in a Jet JFM5 (nice mortiser btw). I also have a Forrest City set which costs about 5 times as much. If you set the jet chisels and bits up right and use proper technique, you get results just as good as the Forrest City units. The Jet chisels aren't as beefy and the bit shanks are short (requiring the shank extension in the JFM5), but considering you can buy five for the price of one FCT set, who cares?

Made of one piece forged chrome vanadium steel. Hardened quenched and tempered for long life and safety. Powder coat finish for increased visibility. Set Includes: 3/8in 1/2in & 5/8in

Chisel has a mark on top but can't make it out has K ? Co. and the Chisel is 3/8" measuring approximately 5 3/4" long from cutting edge to end of socket would need sharpened

Traditionally designed steel blade Flared Chisels are available with either flat, rondel, or toothed blades. Hex-shaped stocks are comfortable and well-balanced for fine work in softer stone. 1/2" hex sizes are also available with round shanks for use with pneumatic tools. Please specify teeth style when ordering.

Older Models : CT-859A, EWC-5018, HT-550, JP-5020, JP-5020 DL, JS-5020 DL

Product Description CHAINSAW CHAINS SEMI CHISEL 3/8 063 72DL FOR STIHL 20" BAR 066 MS660 034 038 Type Semi Chisel Pitch 3/8" Gauge .063" Drive Links 72 Bar length 20" These chains are made up to suit the following Stihl models with a 20" bar: 029 - 029 SUPER - 029 FARMBOSS - 030 - 031 - 032 - 034 - 036 - 036 PRO - 038 - 038 SUPER MAGNUM - 039 - 040 - 041 - 042 - 044 - 045 - 046 - 048 - 056 - 056S - 064 - 066 - 066 MAGNUM - MS290 - MS310 - MS340 - MS360 - MS361 - MS361C - MS362 - MS380 - MS381 -...

120VAC, 1/2 HP, 4.8A, 1PH, 1,750 RPM induction motor - 3/8" chuck with key. 5" maximum stroke; unique, gas-filled head stabilizer. 9-3/8" under head to base, 3-3/4" under holddown. Included riser block adds 1-3/4" capacity under head. Easy, open access to drill chuck for bit changing. 12-1/4" x 8-1/4" cast iron table with through hole; 16-1/4" x 13-1/2" base. Rack & pinion adjustable 2-15/16" x 5-13/16" fence (each side), 13-5/8" overall. Mortising head can turn 180° for off table mortising...