|
3/8" Long Lag Shield
Used for Anchoring Lag Screws in Concrete, Block, Brick, and Mortar Joints. For Testing Data Refer to www.simpsonanchors.com. 
|
$0.62
fastener-warehouse.com
|
Top stores
fastener-warehouse.com
$0.62
|
|
3/8" Long Lag Shield
|
$1.75
|
Top stores
greschlers.com
$1.75
|
|
Lag shields, Die cast zinc alloy, 3/8" long
|
$330.00
boltdepot.com
|
Top stores
boltdepot.com
$330.00
|
|
Crown Bolt 3/8 in. x 2-1/2 in. Zinc Alloy Long Lag Shields (10-Pack) 10402
Shop for Hardware & Fasteners at The Home Depot. These Crown Bolt 3/8 in. x 2-1/2 in. Zinc Alloy Long Lag Shields (10-Pack) are used with lag screws (not included). The lag shields feature zinc alloy construction.
|
$8.98
|
Top stores
Home Depot
$8.98
|
|
Powers 1155 Lag Shield 3/8" Long (50 per box)
Product Details Size: 3/8" Long Drill Diameter: 5/8" Minimum Embed.: 2-1/2" The Lag Shield is a screw style anchor designed for use with lag bolts. It is suitable for use in concrete and the mortar joints of block or brick walls. Lag Shield anchors are formed from Zamac alloy. In harder masonry materials, short style Lag Shields are used to reduce drilling time. The long style version is used in soft or weak masonry to better develop strength.
|
$27.30
heavydutystore.com
|
Top stores
heavydutystore.com
$27.30
|
|
Simpson Strong Tie LSES37L Lag Screw Expansion Shield - 3/8" Long (50)
* Drill a hole in the base material using the appropriate-diameter carbide drill bit as specified in the table. Drill the hole to the specified embedment depth plus 1/8" for flush mounting and blow it clean using compressed air. Alternatively, drill the hole deep enough to accommodate embedment depth and dust from drilling. Overhead installations need not be blown clean.
|
$27.99
|
Top stores
FastoolNow
$27.99
|
|
3/pk. Window Box Mounting Bolts 3/8in. Dia x 3.5in. Long w/ Lag Shields (Brick/Masonry)
For use in mounting Premier Composite Cellular PVC boxes to homes with brick or masonry siding. We suggest using one pack (3 bolts) for mounting boxes 24"-48" in length. Drilling directly into your solid brick, masonry or stone - insert the lag shield first, then mark and drill holes through the back of the box or cleat to match your lag shields in the wall. Washers on bolt heads are not needed nor included.
|
$11.85
hooksandlattice.com
|
Top stores
hooksandlattice.com
$11.85
|
