|
3/8" Straight Plug Cutter 3/8" Shank - Fuller
Make plugs which will almost exactly match the grain pattern of the wood surrounding the countersunk hole. Note that 1/2" cutters and smaller run well at about 1000 to 1200 rpm, run larger cutters at 600 to 800 rpm. Designed for drill press use. 1/2" max. plug length. 
|
$13.20
McFeely's
|
Top stores
McFeely's
$13.20
|
|
Hitachi 725870 3/8-Inch Straight Shank 1 to 1-3/4-Inch Diameter Quick Change Core Cutters
High Quality Carbon Hardened Steel High Tolerance milled shank provides perfect fit CNC Controlled manufacturing ensures 100% quality consistency, Weight: 0.0 lbs., Manufacturer: Hitachi
|
$38.06
|
Top stores
Amazon.com
$38.06
|
|
Wood Plug Cutters 11660375 3/8 in Plug Dia 3/8 in Shank
Cut your own wood plugs with Fuller Plug Cutters. Made of Carbon Steel heat treated to 62c hardness. Designed for clean cutting and hardened for long life. Four bladed plug cutters do not eject plugs; it remains on the board and can be broken out with a screwdriver or sawed free. Suitable for both Softwood and most Hardwoods.
|
$13.53
|
Top stores
Jamestown Distributors
$13.53
|
|
WL Fuller 11681375 1-3/8" Standard Four Flute Plug Cutter, 1/2" Shank
Description WL Fuller 11681375 1-3/8" Standard Four Flute Plug Cutter, 1/2" ShankDescriptionDesigned for clean cutting and hardened for long life. These two and four-bladed Plug Cutters do not eject the plugs. The plug remains in the board and can be broken out with a screwdriver or the board can be sawed to free the plug. These tools cut fast and make smooth chamfered plugs for easy starting in counterbored holes. Made of Carbon Steel and heat-treated for long tool life. Suitable for both soft...
|
$63.53
circlesaw.com
|
Top stores
circlesaw.com
$63.53
|
|
WL Fuller 11640375 3/8" Standard Four Flute Plug Cutter, 1/4" Shank
Description WL Fuller 11640375 3/8" Standard Four Flute Plug Cutter, 1/4" ShankDescriptionDesigned for clean cutting and hardened for long life. These two and four-bladed Plug Cutters do not eject the plugs. The plug remains in the board and can be broken out with a screwdriver or the board can be sawed to free the plug. These tools cut fast and make smooth chamfered plugs for easy starting in counterbored holes. Made of Carbon Steel and heat-treated for long tool life. Suitable for both soft and...
|
$12.89
circlesaw.com
|
Top stores
circlesaw.com
$12.89
|
|
Bosch 85419M 3/8 Shank Straight Router Bit Carbide Tip, 3/8 1/4 Single Flute
Bosch Router Bits - Distinguished for their careful selection of materials, exactly calculated cutting geometry, long bit life, extra sharp cutting edges and low vibration More than 500 items in solid carbide, carbide tipped and high speed steel varieties Working lengths of all Bosch router bits have been matched to the normal thickness of standard solid wood and wood materials. Long-lasting tungsten carbide cutting edges for use with tough materials, Weight: 0.0 lbs., Manufacturer: Bosch
|
$16.49
|
Top stores
Amazon.com
$16.49
|
|
WL Fuller 11680750 3/4" Standard Four Flute Plug Cutter, 1/2" Shank
WL Fuller 11680750 3/4" Standard Four Flute Plug Cutter, 1/2" ShankDescriptionDesigned for clean cutting and hardened for long life. These two and four-bladed Plug Cutters do not eject the plugs. The plug remains in the board and can be broken out with a screwdriver or the board can be sawed to free the plug. These tools cut fast and make smooth chamfered plugs for easy starting in counterbored holes. Made of Carbon Steel and heat-treated for long tool life. Suitable for both soft and most hardwoods...
|
$25.17
circlesaw.com
|
Top stores
circlesaw.com
$25.17
|
|
Bosch 84209M 3/8 Shank Router Bit, Carbide Tip Straight, 1/2X1 Double Flute
Bosch Router Bits - Distinguished for their careful selection of materials, exactly calculated cutting geometry, long bit life, extra sharp cutting edges and low vibration More than 500 items in solid carbide, carbide tipped and high speed steel varieties Working lengths of all Bosch router bits have been matched to the normal thickness of standard solid wood and wood materials. Long-lasting tungsten carbide cutting edges for use with tough materials, Weight: 0.0 lbs., Manufacturer: Bosch
|
$19.79
|
Top stores
Amazon.com
$19.79
|
|
Timberline 607-110 Straight Wood Plug Cutter 3/8 Dia x 3/8 Shank
Straight Wood Plug Cutters
|
$4.41
|
Top stores
Toolstoday.com
$4.41
|
|
Relton RB-6 3/8" x 8" Rebar Cutter, Straight Shank
The Relton carbide-tipped rotary rebar cutter is designed for use in a standard 1/2" chuck drill motor or SDS Plus hammer, provided the selector mechanism is kept in the rotary-only position. The Relton carbide tipped rotary rebar cutter is intended for rotary drilling only. Percussion (hammering action) will damage the tool
|
$36.19
hermanscentral.com
|
Top stores
hermanscentral.com
$36.19
|
|
Champion CM79 1-3/8" Rebar Cutter with Straight Shank
Champion CM79 Rebar Cutters - Easy drilling through embedded rebar and surrounding concrete. Use in any 1/2" capacity or larger drill motor with a three jaw chuck and no load speed of 440 RPM
|
$93.60
hermanscentral.com
|
Top stores
hermanscentral.com
$93.60
|
|
Relton RB-22 1-3/8" x 12" Rebar Cutter, Straight Shank
The Relton carbide-tipped rotary rebar cutter is designed for use in a standard 1/2" chuck drill motor or SDS Plus hammer, provided the selector mechanism is kept in the rotary-only position. The Relton carbide tipped rotary rebar cutter is intended for rotary drilling only. Percussion (hammering action) will damage the tool
|
$92.40
hermanscentral.com
|
Top stores
hermanscentral.com
$92.40
|
|
Snappy 40324 3/8 plug cutter 40324
Match wood grain to conceal screw of use contrasting wood for decorative look. Tight fit - no glue needed. Sharp clean-cutting tool is hardened for long life. Use with your Snappy quick change chuck in your drill press.
|
$11.95
dynamitetoolco.com
|
Top stores
dynamitetoolco.com
$11.95
|
|
3/8 HSS Taper Shank Straight Flute Chucking Reamer
HSS, Chucking Reamer, Taper Shank, Size 3/8, Dec Equiv .3750, Morse Taper 1, Flute Length 1-3/4, O.A.L. 7
|
$11.41
|
Top stores
drillsandcutters.com
$11.41
|
|
DEWCBR1-3/8 1-3/8"x3/8" Pilot Hole HSS Straight Shank Counterbores
|
$58.69
dewitt-tool.com
|
Top stores
dewitt-tool.com
$58.69
|
|
|
1-3/8 HSS Taper Shank Straight Flute Chucking Reamer
HSS, Chucking Reamer, Taper Shank, Size 1-3/8, Dec Equiv 1.3750, Morse Taper 4, Flute Length 3-1/4, O.A.L. 12
|
$52.18
|
Top stores
drillsandcutters.com
$52.18
|
|
|
DEWCBR3/8 3/8"x5/32" Pilot Hole HSS Straight Shank Counterbores
|
$17.94
dewitt-tool.com
|
Top stores
dewitt-tool.com
$17.94
|
|
Irwin Tool 326013 3/8 Rotary Percussion - Straight Shank
Fits all hammer drills with 3-jaw or Jacobs chuck Chrome vanadium shaft through-hardened to 50-53HrC Patented flute geometry removes dust from the hole quicker for fast drilling and long life Up to 150% faster than other competitive bits Shot-peened, double-tempered finish reduces breakage Hot isostatically pressed to extend life and resist breakage Copper braze material gives high heat resistance for reduced tip loss All tips made to ANSI specifications
|
$17.58
acetoolonline.com
|
Top stores
acetoolonline.com
$17.58
|
|
Freud Tools 99-421 2-3/8 Wide Crown Molding Bit, 1/2 Shank (Molding Bevel Cutter)
Description Freud 99-421 Carbide Tipped Wide Crown Molding Bit Specification: Item No.: 99-421 Profile No.: Molding Bevel Cutter" (D) Overall Diameter: 2-3/8" (h) Carbide Height: 1-3/8" (A) Shank Diameter: 1/2" (H) Overall Length: 2-13/16" Application: Milling 5-1/2" wide Crown Molding for ceilings. Crown molding is the perfect way to transform a room, giving height and elegance to an otherwide ordinary ceiling. But commercially manufactured wide crown molding is expensive, hard to find, and the...
|
$77.97
circlesaw.com
|
Top stores
circlesaw.com
$77.97
|
|
Freud Tools 11-160 3/8 "Carbide Tipped Single Flute Straight Bit Shank
Description Freud 11-160 Carbide Tipped Single Flute Straight Bit Specification: Item No.: 11-160 (D) Overall Diameter: 3/8" (h) Carbide Height: 1-1/4" (A) Shank Diameter: 1/2" (H) Overall Length: 3" Application: General stock removal at fast feed rates. This single flute Freud bit was designed for high production work with maximum chip clearance for fast feed rates. Cuts all composite materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and...
|
$17.47
circlesaw.com
|
Top stores
circlesaw.com
$17.47
|
|
CMT 1-3/8" Plug Cutter X 1-27/32" Overall Diameter X 6 Teeth X 6-5/16" Overall Length X 5/8" Shank
|
$43.40
woodline.com
|
Top stores
woodline.com
$43.40
|
|
Irwin Tool 326011B25 3/8 Rotary Percussion - Straight Shank Pack of 25
Fits all hammer drills with 3-jaw or Jacobs chuck Chrome vanadium shaft through-hardened to 50-53HrC Patented flute geometry removes dust from the hole quicker for fast drilling and long life Up to 150% faster than other competitive bits Shot-peened, double-tempered finish reduces breakage Hot isostatically pressed to extend life and resist breakage Copper braze material gives high heat resistance for reduced tip loss All tips made to ANSI specifications
|
$140.35
acetoolonline.com
|
Top stores
acetoolonline.com
$140.35
|
|
43906 3/8IN. PLUG CUTTER-IRWIN INDUSTRIAL TOOL CO
For covering fastener holes. For furniture, cabinetry, floors and decks. Hardened, high-carbon steel. Ideal for making dowels. 1/4" shank size.
|
$12.75
kofflersales.com
|
Top stores
kofflersales.com
$12.75
|
|
Irwin Tool 326011 3/8 Rotary Percussion - Straight Shank
Fits all hammer drills with 3-jaw or Jacobs chuck Chrome vanadium shaft through-hardened to 50-53HrC Patented flute geometry removes dust from the hole quicker for fast drilling and long life Up to 150% faster than other competitive bits Shot-peened, double-tempered finish reduces breakage Hot isostatically pressed to extend life and resist breakage Copper braze material gives high heat resistance for reduced tip loss All tips made to ANSI specifications
|
$6.26
acetoolonline.com
|
Top stores
acetoolonline.com
$6.26
|
|
Powers Fasteners 00849 3/4 x 12 Rebar Cutter Straight Shank
When drilling with a hammer drill or rotary hammer, it is important to stop drilling immediately when a standard carbide bit contacts steel reinforcing bar or wire mesh. If the drilled hole cannot be relocated a rebar cutter bit is used to drill through the embedded steel. Insert the rebar cutter bit into the chuck of a standard 1/2" rotary drill. Place the bit into the partially drilled hole until it contacts the mesh or reinforcing bar. Drill through the embedded steel with the rebar cutter bit...
|
$61.79
hermanscentral.com
|
Top stores
hermanscentral.com
$61.79
|
