|
Crosby 1010676 1-3/8-1-1/2" Fist Grip wire rope clip galvanized
Fist Grip wire rope clip G-429 hot dip galvanized meets/exceeds ASME B30.26 requirements forged steel saddles assembled with standard heavy hex nuts; efficiency rating of 90% 
|
$142.09
|
Top stores
Amazon.com
$142.09
|
|
|
Crosby 1010514 3/8" Fist Grip wire rope clip galvanized
Fist Grip wire rope clip G-429 hot dip galvanized meets/exceeds ASME B30.26 requirements forged steel saddles - new style design assembled with standard heavy hex nuts; efficiency rating of 80%
|
$20.95
|
Top stores
Amazon.com
$20.95
|
|
Crosby 1010426 3-1/2" (85-90MM) forged wire rope clip galvanized
wire rope clip G-450 cast steel base meets/exceeds ASME B30.26 requirements provide greater rope bearing surface and more consistent strength than malleable cast iron clips
|
$866.10
|
Top stores
Amazon.com
$866.10
|
|
kee safety 105-8 sheeting clip without hardware galvanized steel 1-1/2" id
this fitting is used to attach profiled or flat sheeting. it is not supplied with hardware. ež indicates diameter of bolt hole. part weight a d e f g Ç 105-6 0.31 lbs.61.26 in.1.5 in.0.51 in1.97 in0.35 in105-7 0.35 lbs.71.5 in.1.57 in.0.51 in1.97 in0.35 in105-8 0.4 lbs.81.57 in.1.57 in.0.51 in1.97 in0.35 in105-9 0.51 lbs.91.89 in.1.57 in.0.51 in1.97 in0.35 in
|
$4.82
|
Top stores
buyrailings.com
$4.82
|
|
Crown Bolt 07670 3/8 Inch x 1-1/4 Inch Hot Dipped Galvanized Steel Cut Washers, 5 Pounds
Galvanized 3/8 inch flat washers For general applications 3/8-inch inner diameter Galvanized finish with Rust-Oleum certified rust protection Use with nuts and bolts of the same inner diameter and finish, Manufacturer: Crown Bolt
|
$19.75
|
Top stores
Amazon.com
$19.75
|
|
Crown Bolt 07674 3/8 Inch x 1-1/4 Inch Hot Dipped Galvanized Steel Cut Washers, 25-Count
Galvanized 3/8 inch flat washers For general applications 3/8-inch inner diameter Galvanized finish Use with nuts and bolts of the same inner diameter and finish, Manufacturer: Crown Bolt
|
$5.69
|
Top stores
Amazon.com
$5.69
|
|
Crown Bolt 06570 3/8 Inch-16 x 3-1/2 Inch Hot Dipped Galvanized Steel Hex-Head Lag Screws, 50-Count
Galvanized 3/8 inch-16 x 3-1/2 inch lag screw hex head For wood applications 3/8 inch-16 body diameter and thread pitch 3-1/2-inch fastener length Galvanized finish with Rust-Oleum certified rust protection, Manufacturer: Crown Bolt
|
$61.67
|
Top stores
Amazon.com
$61.67
|
|
|
Bridgeport 1089-8 3-1/2-Inch to 3-Inch Galvanized Steel Reducing Washer, 5-Pack
Galvanized steel 3-1/2-Inch large end trade size 3-Inch small end trade size Used on rigid conduit/IMC Applicable standard NEMA FB-1, Manufacturer: Bridgeport Fittings
|
$37.99
|
Top stores
Amazon.com
$37.99
|
|
BATTALION 1RCP6 Round U Bolts,1 3/8 Lx3 3/4 Hx5/16 In W
U Bolts, Round, Material Steel, Zinc Finish, Length 3 3/4 In, Height 3 3/4 In, Width 1 3/8 In, Thread Length 5/16 In, Wire Dia 5/16 In, 1 Pipe, Includes Plate And Nuts
|
$3.06
grainger.com
|
Top stores
grainger.com
$3.06
|
|
Campbell Chain 6990634 3/8" Wire Rope Clip, Forged Carbon Steel, Galvanized
* For Rope Diameter 3/8 in. * Maximum No. of Clips Required 2. * Standard Material Drop-Forged Carbon Steel. * Finish Galvanized. * Weight Each .48 lb. * (1) 3/8" Wire Rope Clip, Forged Carbon Steel, Galvanized. * Standard material: Base is drop-forged carbon steel, with heavy hex nuts. * Standard finish: Galvanized to ASTM A-153 specification. * Meets specification FF-C-450, Type 1, Class 1.
|
$4.53
|
Top stores
Toolup.com
$4.53
|
|
Campbell 1000-G 1-3/4" Wire Rope Clip, Forged Carbon Steel, Galvanized
1-3/4" Cable or wire Size 2-3/4" Thread length 5-13/16" Inner length Blue U-bolt for identification Comes in standard pack
|
$77.04
|
Top stores
Amazon.com
$77.04
|
|
3/8" Galvanized Square U-Bolt, 1-5/8" x 3-9/16" #86227
Galvanized steel U-Bolt Kit includes: (1) U-Bolt, (2) lock washers & (2) nuts. Used for mounting brackets, spring hangers, winch posts & crossmembers to trailer frame. Bend Shape: Square Diameter: 3/8" Leg Length: (A) 3-9/16" Leg Width: (B) 1-5/8" Thread Length: (C) 1-3/4"
|
$5.95
|
Top stores
easternmarine.com
$5.95
|
|
BAND-IT CP0399 3/8" Wide x 0.025" Thick 13/16" Diameter, Galvanized Carbon Steel Center Punch Clamp (100 Per Box)
Galvanized carbon steel band offers medium strength with medium corrosion resistance to mild chemicals and occasional fresh water Center Punch clamps use a punch style clamp for economy and ease of installation For general plant maintenance or emergency field repairs BAND-IT Center Punch Clamps are constructed with a double wrap of band material which increases the holding power of clamped assemblies Center Punch Clamps can be installed with BAND-IT hand tools: S03869, or T30069, or pneumatic production...
|
$29.82
|
Top stores
Amazon.com
$29.82
|
|
Pneu-Fast BD8DRHG 2-3/8-by-0.113-Inch Tri-Coat Galvanized Ring Framing Nail for 28-Degree Framing Nailers, 1000-Count
Highest quality steel along with full gauge precision creates more tensile and shear strength. ACQ Approved Superior Hi-Bond resin tape that will remain rigid in water exposure Exclusive Hold-Fast acrylic glue coating delivers maximum holding power in all types of wood Packaged in sturdy cartons that are virtually weather proof All Pneu-Fast collated fasteners meet or exceed ASTM performance standards, Manufacturer: Pneu-Fast
|
$40.27
|
Top stores
Amazon.com
$40.27
|
|
Pneu-Fast BD8DXHG 2-3/8-by-0.120-Inch Tri-Coat Galvanized Framing Nail for 28-Degree Framing Nailers, 1000-Count
Highest quality steel along with full gauge precision creates more tensile and shear strength. ACQ Approved Superior Hi-Bond resin tape that will remain rigid in water exposure Exclusive Hold-Fast acrylic glue coating delivers maximum holding power in all types of wood Packaged in sturdy cartons that are virtually weather proof All Pneu-Fast collated fasteners meet or exceed ASTM performance standards, Manufacturer: Pneu-Fast
|
$40.45
|
Top stores
Amazon.com
$40.45
|
|
Pneu-Fast SP8DRHG 2-3/8-by-0.113-Inch Tri-Coat Galvanized Ring Clipped Head Nail for 30-33 Degree Nailers, 1000-Count
Highest quality steel along with full gauge precision creates more tensile and shear strength. ACQ Approved Superior Hi-Bond resin tape that will remain rigid in water exposure Exclusive Hold-Fast acrylic glue coating delivers maximum holding power in all types of wood Packaged in sturdy cartons that are virtually weather proof All Pneu-Fast collated fasteners meet or exceed ASTM performance standards, Manufacturer: Pneu-Fast
|
$34.55
|
Top stores
Amazon.com
$34.55
|
|
|
Pneu-Fast SP8DXRHG 2-3/8-by-0.120-Inch Tri-Coat Galvanized Ring Clipped Head Nail for 30-33 Degree Nailers, 1000-Count
Highest quality steel along with full gauge precision creates more tensile and shear strength. ACQ Approved Superior Hi-Bond resin tape that will remain rigid in water exposure Exclusive Hold-Fast acrylic glue coating delivers maximum holding power in all types of wood Packaged in sturdy cartons that are virtually weather proof All Pneu-Fast collated fasteners meet or exceed ASTM performance standards, Manufacturer: Pneu-Fast
|
$26.71
|
Top stores
Amazon.com
$26.71
|
|
Hanger Galvanized Steel 5" #1 Circle with Spring Clip, Nut & Bolt
Use for special installation scenarios like slanted fascia, rafter ends, or roof mounting.
|
$3.39
egutter.com
|
Top stores
egutter.com
$3.39
|
|
Wire Rope Clips - Drop Forged Steel Mfg# 23340-8 - 1/2"
These wire rope fittings are manufactured to rigid specifications. Components are hot-dipped galvanized to ASTM-A-153 standard.
|
$2.44
downwindmarine.com
|
Top stores
downwindmarine.com
$2.44
|
|
BATTALION 1RCV2 Round U Bolts,1 3/8 Lx3 3/4 Hx5/16 In W
U Bolts, Round, Material Stainless Steel, Stainless Finish, Length 3 3/4 In, Height 3 3/4 In, Width 1 3/8 In, Thread Length 5/16 In, Wire Dia 5/16 In, 1 Pipe, Includes Plate And Nuts
|
$10.79
grainger.com
|
Top stores
grainger.com
$10.79
|
|
Jaw and Eye Galvanized Steel Swivel Shackle WC67603/8 3/8 in
Our Jaw and Eye Galvanized Steel Swivel Shackles are drop forged, heat treated steel with a hot galvanized finish. Supplied with a flat head clevis pin and a cotter pin.
|
$25.18
|
Top stores
Jamestown Distributors
$25.18
|
|
812596 - 50 Pack, 3/8-16 X 8""", Galvanized Carriage Bolt, Steel Round Head, Square Neck, Coarse Thread.
[266890] UPC: 8236133837 0.6L x 0.6W x 11.18H 11.18 LB
|
$65.67
|
Top stores
Capitol Supply
$65.67
|
|
Campbell Chain #6990634 3/8 in. Wire Rope Clips (U.S.A)---75 Pcs /Case
Material: 3/8 in. Wire Rope Clip· Forged Carbon Steel· Galvanized
|
$328.73
industrialhardware.com
|
Top stores
industrialhardware.com
$328.73
|
|
BATTALION 1RCN9 Round U Bolts,1 3/8 Lx4 Hx1/4 In W
U Bolts, Round, Material Steel, Zinc Finish, Length 4 In, Height 4 In, Width 1 3/8 In, Thread Length 1/4 In, Wire Dia 1/4 In, 1 Pipe, Includes Plate And Nuts
|
$3.10
grainger.com
|
Top stores
grainger.com
$3.10
|
|
U BOLT BOW EYE 3/8 X2-9/16
Thread, - Size,"4-3/8" L 1-1/16"- Face Plate, "2-1/2" x 1" " Made from long-lasting stainless steel. When transom mounted can function as a ski tow hook. Nut and washers included.,
|
$7.98
marineparts.com
|
Top stores
marineparts.com
$7.98
|
|
Crown Bolt 51170 3/8-Inch 30-Feet Proof Coil Chain, Galvanized
Steel with galvanized finish for better weather resistance Grade 30 proof coil chain Working load limit of 2,650 lbs. Maximum working load limit that shall be applied in direct tension to a new and undamaged chain Brass plated, Manufacturer: Crown Bolt
|
$91.80
|
Top stores
Amazon.com
$91.80
|
|
Campbell Chain 6990834 1/2" Wire Rope Clip, Forged Carbon Steel, Galvanized
* For Rope Diameter 1/2 in. * Maximum No. of Clips Required 2. * Standard Material Drop-Forged Carbon Steel. * Finish Galvanized. * Weight Each .76 lb. * (1) 1/2" Wire Rope Clip, Forged Carbon Steel, Galvanized. * Standard material: Base is drop-forged carbon steel, with heavy hex nuts. * Standard finish: Galvanized to ASTM A-153 specification. * Meets specification FF-C-450, Type 1, Class 1.
|
$5.21
|
Top stores
Toolup.com
$5.21
|
|
BATTALION 1RCP3 Round U Bolts,1 3/8 Lx2 1/2 Hx5/16 In W
U Bolts, Round, Material Steel, Zinc Finish, Length 2 1/2 In, Height 2 1/2 In, Width 1 3/8 In, Thread Length 5/16 In, Wire Dia 5/16 In, 1 Pipe, Includes Plate And Nuts
|
$2.89
grainger.com
|
Top stores
grainger.com
$2.89
|
|
Campbell Chain #6992835 1-3/4 in. Wire Rope Clips (U.S.A)---1 Pcs
Material: 1-3/4 in. Wire Rope Clip· Forged Carbon Steel· Galvanized
|
$95.75
industrialhardware.com
|
Top stores
industrialhardware.com
$95.75
|
|
SEACHOICE 57301 RD U-BOLT-1 3/4X4 3/8
Solid galvanized steel u-bolts with nuts and lock washers. Covers most U-Bolt applications. One per card or in bulk.
|
$5.12
|
Top stores
LowCostBoatingStore.com
$5.12
|
|
Round U bolts Round U bolts,1 3/8 Lx4 Hx1/4 In W
U bolts, Round, Material Steel, Zinc Finish, Length 4 In, Height 4 In, Width 1 3/8 In, Thread Length 1/4 In, Wire Dia 1/4 In, 1 Pipe, Includes Plate and Nuts
|
$1.05
zorotools.com
|
Top stores
zorotools.com
$1.05
|
|
|
SEACHOICE 57300 RD U-BOLT-1 3/4X4 3/8-(BULK)
Solid galvanized steel u-bolts with nuts and lock washers. Covers most U-Bolt applications. One per card or in bulk.
|
$5.12
|
Top stores
LowCostBoatingStore.com
$5.12
|
|
Seachoice 57341 Galvanized Square U-BOLT 7-7/8"
Solid galvanized steel U-bolts with nuts and lock washers. Covers most U-bolt applications. Diameter: 3/8-16. Sold individually.
|
$5.99
boatersland.com
|
Top stores
boatersland.com
$5.99
|
|
3/8" CROWN 20 GAUGE x 3/8" GALVANIZED STAPLES A11-3/8 FOR ARROW T50 (100M) CASE
Manufactured according to Rapid and Arrow specifications, these staples are made of Electro Galvanized 20 gauge steel wire. Our A11-3/8 staples are 3/8" (10mm) flat crown and 3/8" (10mm) length. Preferred by Roofers for attaching rolled felt paper underlayment. Each case contains 20 boxes of approximately 5,000 staples per box. 100,000 nails per case.
|
$59.95
fastenerusa.com
|
Top stores
fastenerusa.com
$59.95
|
|
Campbell T7670419 3/32" - 1/8" Wire Rope Clip, Malleable, Galvanized, Import, UPC Tagged
Campbell T7670419 3/32" - 1/8" Wire Rope Clip, Malleable, Galvanized, Import, UPC Tagged
|
$0.51
|
Top stores
Toolfetch.com
$0.51
|
