|
3/4" Straight Plug Cutter 1/2" Shank - Fuller
Make plugs which will almost exactly match the grain pattern of the wood surrounding the countersunk hole. Note that 1/2" cutters and smaller run well at about 1000 to 1200 rpm, run larger cutters at 600 to 800 rpm. Designed for drill press use. 3/4" max. plug length. 
|
$25.85
McFeely's
|
Top stores
McFeely's
$25.85
|
|
WL Fuller 11681375 1-3/8" Standard Four Flute Plug Cutter, 1/2" Shank
Description WL Fuller 11681375 1-3/8" Standard Four Flute Plug Cutter, 1/2" ShankDescriptionDesigned for clean cutting and hardened for long life. These two and four-bladed Plug Cutters do not eject the plugs. The plug remains in the board and can be broken out with a screwdriver or the board can be sawed to free the plug. These tools cut fast and make smooth chamfered plugs for easy starting in counterbored holes. Made of Carbon Steel and heat-treated for long tool life. Suitable for both soft...
|
$63.53
circlesaw.com
|
Top stores
circlesaw.com
$63.53
|
|
WL Fuller 11680750 3/4" Standard Four Flute Plug Cutter, 1/2" Shank
WL Fuller 11680750 3/4" Standard Four Flute Plug Cutter, 1/2" ShankDescriptionDesigned for clean cutting and hardened for long life. These two and four-bladed Plug Cutters do not eject the plugs. The plug remains in the board and can be broken out with a screwdriver or the board can be sawed to free the plug. These tools cut fast and make smooth chamfered plugs for easy starting in counterbored holes. Made of Carbon Steel and heat-treated for long tool life. Suitable for both soft and most hardwoods...
|
$25.17
circlesaw.com
|
Top stores
circlesaw.com
$25.17
|
|
Champion CM79-1-3/4 Proline 1-3/4-Inch Rotary Rebar Cutter 1/2-Inch Shank
Rotary Rebar Cutters are carbide tipped and have a 1/2-Inch shank. Easy drilling through embedded rebar and surrounding concrete. Use in any 1/2-Inch capacity or larger drill motor with a three jaw chuck and no load speed of 440 rpm. Application: Drill first with a hammer drill bit(1) until reaching rebar. Replace bit with CM79 drill then penetrate rebar(2). After completion of rebar drilling, complete drilling with hammer bit(3)., Manufacturer: Champion Cutting Tool
|
$106.78
|
Top stores
Amazon.com
$106.78
|
|
Timberline 607-120 Straight Wood Plug Cutter 1/2 Dia x 3/8 Shank
Straight Wood Plug Cutters
|
$4.97
|
Top stores
Toolstoday.com
$4.97
|
|
Kempston 106434 Straight Bit with Bottom Cutter, 1/2-Inch Shank, 1/2-Inch Cutting Diameter, 1-1/4-Inch Cutting Length
Prefessional Grade C3 or C4 Premium Carbide Non-Stick Coating Anti-Kickback Design C.N.C. Precision Ground, Manufacturer: Kempston
|
$18.64
|
Top stores
Amazon.com
$18.64
|
|
3/4 HSS 1/2 Straight Shank Bridge Reamer
HSS, Bridge Reamer, Size 3/4, Point Dia 15/32, Flute Length 5, O.A.L. 6-7/8
|
$50.44
|
Top stores
drillsandcutters.com
$50.44
|
|
Powers Fasteners 00849 3/4 x 12 Rebar Cutter Straight Shank
When drilling with a hammer drill or rotary hammer, it is important to stop drilling immediately when a standard carbide bit contacts steel reinforcing bar or wire mesh. If the drilled hole cannot be relocated a rebar cutter bit is used to drill through the embedded steel. Insert the rebar cutter bit into the chuck of a standard 1/2" rotary drill. Place the bit into the partially drilled hole until it contacts the mesh or reinforcing bar. Drill through the embedded steel with the rebar cutter bit...
|
$61.79
hermanscentral.com
|
Top stores
hermanscentral.com
$61.79
|
|
Wood Plug Cutters 11640250 1/4 in Plug Dia 1/4 in Shank
Cut your own wood plugs with Fuller Plug Cutters. Made of Carbon Steel heat treated to 62c hardness. Designed for clean cutting and hardened for long life. Four bladed plug cutters do not eject plugs; it remains on the board and can be broken out with a screwdriver or sawed free. Suitable for both Softwood and most Hardwoods.
|
$10.48
|
Top stores
Jamestown Distributors
$10.48
|
|
Relton RB-12-24 3/4" x 24" Rebar Cutter, Straight Shank
T he Relton carbide-tipped rotary rebar cutter is designed for use in a standard 1/2" chuck drill motor or SDS Plus hammer, provided the selector mechanism is kept in the rotary-only position. The Relton carbide tipped rotary rebar cutter is intended for rotary drilling only. Percussion (hammering action) will damage the tool
|
$77.00
hermanscentral.com
|
Top stores
hermanscentral.com
$77.00
|
|
WL Fuller 11640375 3/8" Standard Four Flute Plug Cutter, 1/4" Shank
Description WL Fuller 11640375 3/8" Standard Four Flute Plug Cutter, 1/4" ShankDescriptionDesigned for clean cutting and hardened for long life. These two and four-bladed Plug Cutters do not eject the plugs. The plug remains in the board and can be broken out with a screwdriver or the board can be sawed to free the plug. These tools cut fast and make smooth chamfered plugs for easy starting in counterbored holes. Made of Carbon Steel and heat-treated for long tool life. Suitable for both soft and...
|
$12.89
circlesaw.com
|
Top stores
circlesaw.com
$12.89
|
|
WL Fuller 11694003 3 Set of 3 Plug Cutter Set, 1/4" Shank
Description WL Fuller 11694003 3 Set of 3 Plug Cutter Set, 1/4" ShankDescriptionDesigned for clean cutting and hardened for long life. These two and four-bladed Plug Cutters do not eject the plugs. The plug remains in the board and can be broken out with a screwdriver or the board can be sawed to free the plug. These tools cut fast and make smooth chamfered plugs for easy starting in counterbored holes. Made of Carbon Steel and heat-treated for long tool life. Suitable for both soft and most hardwoods...
|
$45.80
circlesaw.com
|
Top stores
circlesaw.com
$45.80
|
|
CMT 1-3/4" Plug Cutter X 2-7/32" Overall Diameter X 6 Teeth X 6-5/16" Overall Length X 5/8" Shank
|
$51.75
woodline.com
|
Top stores
woodline.com
$51.75
|
|
Relton RB-40 2-1/2" x 12" Rebar Cutter, Straight Shank
The Relton carbide-tipped rotary rebar cutter is designed for use in a standard 1/2" chuck drill motor or SDS Plus hammer, provided the selector mechanism is kept in the rotary-only position. The Relton carbide tipped rotary rebar cutter is intended for rotary drilling only. Percussion (hammering action) will damage the tool
|
$154.00
hermanscentral.com
|
Top stores
hermanscentral.com
$154.00
|
|
Fuller Plug Cutter 1/4" 11640250
WL Fuller 11640250 1/4 inch Plug Cutter 1/4 inch shank.
|
$9.50
westerntool.com
|
Top stores
westerntool.com
$9.50
|
|
Big Horn 19154 1/4 in. Shank 1/2 in. Plug Cutter
High Quality Made in the USA by W. L. Fuller.
|
$18.95
dynamitetoolco.com
|
Top stores
dynamitetoolco.com
$18.95
|
|
PLUG CUTTER 1/2" SHANK DIA. 3/8" 114238
Plug Cutter, Four flute, 1/2" plug dia.1/2" Max plug length, 3/8" Shank. Suitable for both soft and most hardwoods. Plug diameter is slightly larger than counterbore diameter for a tight fit every time!
|
$15.99
hamiltonmarine.com
|
Top stores
hamiltonmarine.com
$15.99
|
|
|
PLUG CUTTER 1/2" SHANK DIA. .25" 114233
Plug Cutter, Four flute, 1/2" plug dia.1/2" Max plug length, 1/4" Shank. Suitable for both soft and most hardwoods. Plug diameter is slightly larger than counterbore diameter for a tight fit every time!
|
$15.99
hamiltonmarine.com
|
Top stores
hamiltonmarine.com
$15.99
|
|
Relton RB-22 1-3/8" x 12" Rebar Cutter, Straight Shank
The Relton carbide-tipped rotary rebar cutter is designed for use in a standard 1/2" chuck drill motor or SDS Plus hammer, provided the selector mechanism is kept in the rotary-only position. The Relton carbide tipped rotary rebar cutter is intended for rotary drilling only. Percussion (hammering action) will damage the tool
|
$92.40
hermanscentral.com
|
Top stores
hermanscentral.com
$92.40
|
|
CMT 3/8" Plug Cutter X 49/64 Overall Diameter X 4 Teeth X 5-1/2" Overall Length X 1/2" Shank
|
$11.95
woodline.com
|
Top stores
woodline.com
$11.95
|
|
CMT 1-1/4" Plug Cutter X 1-19/32" Overall Diameter X 5 Teeth X 6-5/16" Overall Length X 1/2" Shank
|
$41.15
woodline.com
|
Top stores
woodline.com
$41.15
|
