64 results for "3/16 in I.D. Red Heat Shrink Tubing 4 ft" between $1.00 and $50.00

High-quality polyolefin FP-301 series heat shrink tubing meets your most stringent electrical performance requirements. Thin wall tubing provides maximum environmental protection. 2:1 shrink ratio is ideal for cable splices and terminations, lightweight wire harness covering, wire marking, component packaging and fire resistant covering. Meets MIL-I-23053/5 Class 1 and 2 and AMS 3636, AMS 3637 requirements. UL recognized and CSA certified at 600V125°C. Each piece is 48'' long.

Heat Shrink Tubing, Length 48 In., Inside Diameter Before Shrinking 0.187 In, Inside Diameter After Shrinking 0.050 In, Shrink Ratio 4:1, Wall Thick Nominal Recovered 0.012 In., Material of Construction Polytetrafluoroethylene, Temp. Range -454 To 500 F, Max. Voltage Greater than 1400 V/mil, Color Natural, Resists Many Chemicals, Heat, Corrosion, Shock, Moisture, Abrasion, Standards AMS-DTL-23053/12 Class 5

Material Type: Thin Wall Cross-Linked Polyolefin. Shrink Ratio: 2:1. Inner Diameter: 0.187". Wall Thickness: 0.020". Length: 48". Color: Red. Shrink Temperature: 120°C. Operating Temperature: -55°C to 110°C. Tensile Strength: 2200 PSI. UL Recognized. Dielectric Strength: 600 Volts per mil. Fluid Resistance: Good to Excellent. Copper Corrosion: No Corrosion. Water Absorption: 0.2%. Flammability: Flame Retardant. Resistant to common fluids and solvents. Meets MIL-DTL-23053/5. Meets...

Product Description 4 Pieces Polyolefin Single Wall Shrink Tubing 6" Length each 3/16" Inside diameter - 2 to 1 Shrink Ratio Easy Install: Slide shrink tube over wire Crimp terminal onto the wire Slide shrink tube back over terminal Apply heat ( 200 to 300 degrees F)

Flexible tubing designed to shrink when heat is applied. Great for insulating electrical connections.

Polyolefin heat shrinkable tubing shrinks to 50% of its original diameter when heated. It forms a tight mechanical bond even over irregularly shaped materials. Size listed is expanded (pre-shrunk) diameter.

Description Item# HST-3/16-RD100Heat Shrink Tubing Red 3/16", 100ft Roll Shrink Temperature (C) 90~120 Operating Temperature Range (C) -55~125 Radial Shrink Ratio (%) >2:1 Longitudinal Change (%) < ± 5 Tensile Strength (MPa) >10.4 Ultimate Elongation Ratio (%) >200 Aging in Circulation-Air Oven 158.0 ± 1.0C, 168 hrs.

The Master Appliance 11625 Shrink Tubing is a dual-walled flexible heat-shrink tube with an adhesive lining. It has an internal layer of thermo-plastic adhesive, which provides a barrier against contaminates. The 11625 is made of a self extinguishing UL224 (except clear) and polyolefin material with a shrink ratio of 2-to-1. This highly flexible tube is ideal for conforming to irregular objects. Benefits & Features of the Master Appliance 11625 Shrink Tubing: Highly flexible Self-extinguishing Specifications...

Also known as: KTI02621; TUBING HEAT SHRINK 3/16 IN. 4/PK

Heat shrink tubing is typically used as a shrink-fit electrical insulation over cablesplices and terminations. It is also used for lightweight wire harness covering,wire marking, wire bundling, component packaging and fire-resistant covering.

2:1 Shrink Ratio. Mil Spec. # MIL-DTL-23053/9. Flame retardant. Flammability Rating: UL VW-1, CSA OFT. Highly heat resistant. Continuous operating temperature: -67°F to 347°F ( -55°C to 175°C). Shrink ratio: 50% or moe in the radial direction, 5% or less in the axial direction. Excellent electrical properties. High resistance to chemicals and oils. Color: Clear. Also sold in Black, call for pricing and availabilty. Available in 4 foot Lengths and Spool Quantities.

Ancor heat shrink tubing bonds tenaciously to insulating covers and terminals, producing a much stronger connection than the mechanical connection alone.

K Tool International Heat Shrink Tubing - 3/16 In - 4/Pk

MMM 55917 OI protection for electronics components, wire splices, wire bundles, and harness breakouts. 3M EPS-300 is a superb insulator that also functions as a strain relief and an environmental seal.

3/16 in I.D. Black Polyolefin Heat Shrink Tubing 4 ft MCM Part #: 95-020 | Ico-Rally Part #: 8504

High-quality polyolefin FP-301 series heat shrink tubing meets your most stringent electrical performance requirements. Thin wall tubing provides maximum environmental protection. 2:1 shrink ratio is ideal for cable splices and terminations, lightweight wire harness covering, wire marking, component packaging and fire resistant covering. MeetsMIL-I-23053/5 Class 1 and 2 and AMS 3636, AMS 3637 requirements. UL recognized and CSA certified at 600V125°C. Each piece is 48'' long.