61 results for "3 Foot Cat5e Cross-Over Ethernet Patch Cables" between $1.00 and $10.00

Our Snagless Category 5 Enhanced (Cat5e) Crossover Ethernet Patch Cables have molded boots to prevent the cable from catching when pulled through tight spaces. Built to last, our high quality Crossover Ethernet cables are pure copper for maximum throughput and reliability and are covered by a lifetime warranty. Individually bagged and labeled in Retail Packaging, these Cat5e crossover cables are easy to store and the length and type is easily identifiable.

3 ft. (0.9m), 7 ft. (2.13m), 10 ft. (3.05m), 14 ft. (4.3m), 25 ft. (7.6m), 50 ft. (15.2m) lengths. STP - Shielded twisted pair (with overall foil shield). PVC cable jacket (yellow or orange). RJ45 male connectors. 350 MHz, 4-pair 24 AWG stranded copper. Cat5e cables can support 10 / 100 / 1000 Mbps. Exceeds Category 5e cable specifications. Labeled as "Crossover" on both ends. RoHS compliant. CM rated, suitable for general use other than plenum spaces. (Not suitable for use in spaces between...

Crossover Ethernet cables are designed to allow two devices, such as computers, to communicate directly. Standard Ethernet cables (called "straight through" as opposed to crossover) require that a device be connected to a switch or hub before communicating with another device. These hubs or swtiches match the transmission point from one end of the cable to the receiving point at the other end. A crossover cable switches the wires, allowing the devices to bypass the hub or switch. Features: Connector...

With a Cables To Go Enhanced Cat5 350Mhz Crossover Patch Cable and a network adapter you can easily network two Windows-based computers in a Peer-to-Peer Networking configuration. In addition this cable can be used for hub-to-hub transceiver-to-transceiver or repeater-to-repeater ethernet connections. Primary InformationNetwork Cable Type�Patch Cable�Cable Technology�Unshielded twisted pair (UTP)�Left Connector Gender�Male�Right Connector Gender�Male�Left Connector Type�RJ-45�Right Connector Type...

This Cat5E 3 foot grey crossover cable is used for networking, data transfer and phone lines. For use from a DSL/cable modem directly to the PC and for a direct link from PC to PC. This particular cable is a grey UTP (Unshielded Twisted Pair) crossover cable with molded boots (snagless) installation and extra protection for the RJ45 connector and clip. The individual conductors are 24AWG (American wire gauge) stranded pure copper. Cat5E patch cables are stranded to improve flexibility. Pure copper...

Crossover Ethernet cables are designed to allow two devices, such as computers, to communicate directly. Standard Ethernet cables (called "straight through" as opposed to crossover) require that a device be connected to a switch or hub before communicating with another device. These hubs or swtiches match the transmission point from one end of the cable to the receiving point at the other end. A crossover cable switches the wires, allowing the devices to bypass the hub or switch. Features: Connector...

Connector: 50-micron gold plated RJ-45 Male to Male. Conductor: 4-pair 24 AWG Stranded Copper. Jacket: PVC. Applications:1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3)4/16 Mbps Token Ring (IEEE 802.5); 100 VG-AnyLAN100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM. Designed For: Peer-to-peer, hub-to-hub, transceiver to transceiver or repeater to repeater ethernet connection. Exceeds Category 5e specifications. Wired: TSB 568B (AT&T 258A). Certifications: TIA/EIA.

Today's advanced fast ethernet and gigabit computer networks require Enhanced Category 5 high-speed cabling to distribute data, voice and video. Cables To Go's Enhanced Cat5 350Mhz Crossover Patch Cables will keep you ahead of the game. These cables will handle bandwidth intensive applications up to 350 Mhz and beyond. Each meets all Cat 5e TIA/EIA standards, and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire! Constructed with high-quality...

Crossover patch cables are used to connect workstation to workstation or hub to hub

Crossover Cables are used for hub-to-hub or peer-to-peer networking applications. Fast ethernet and gigabit computer networks require Enhanced Category 5 high-speed cabling to distribute voice, video and data. These cables will handle bandwidth intensive applications up to 350 Mhz and beyond. Each cable meets all Cat 5e TIA/EIA standards, and drastically reduce both impedance and structural return loss (SRL) as compared to standard Cat 5. Each Cable is constructed with high-quality cable and a shortened...

Connector; 50-micron gold plated RJ45 male plugs. Conductor; 4-pair 24 AWG stranded copper. Overall foil shielded Ethernet cable for industrial applications. Crossover cables are labeled with "crossover" on both ends of the cat5e cable. Exceeds Category 5e specifications, 350MHz. Multiple lengths and colors. RoHS compliant. CM rated, suitable for general use other than plenum spaces. (Not suitable for use in spaces between the walls or floors of buildings).

Today's advanced fast ethernet and gigabit computer networks require Enhanced Category 5 high-speed cabling to distribute data, voice and video. Cables To Go's Enhanced Cat5 350Mhz Crossover Patch Cables will keep you ahead of the game. These cables will handle bandwidth intensive applications up to 350 Mhz and beyond. Each comes UL verified to meet all Cat 5e TIA/EIA standards, and drastically reduces both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire. These cables...

Today's advanced fast ethernet and gigabit computer networks require Enhanced Category 5 high-speed cabling to distribute data, voice and video. Cables To Go's Enhanced Cat5 350Mhz Crossover Patch Cables will keep you ahead of the game. These cables will handle bandwidth intensive applications up to 350 Mhz and beyond. Each comes UL verified to meet all Cat 5e TIA/EIA standards, and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire! This is accomplished...

Description Today's advanced fast ethernet and gigabit computer networks require Enhanced Category 5 high-speed cabling to distribute data, voice and video. Our Enhanced Cat5 100Mhz Crossover Patch Cables will keep you ahead of the game. These cables will handle bandwidth intensive applications up to 100 MHz. Each comes UL verified to meet all Cat 5e TIA/EIA standards. Constructed with high-quality wire and a shortened body plug will keep Near-end Crosstalk (NEXT) levels to a minimum. Our 100MHz...

Today's advanced fast ethernet and gigabit computer networks require Enhanced Category 5 high-speed cabling to distribute data, voice and video. Cables To Go's Enhanced Cat5 350Mhz Crossover Patch Cables will keep you ahead of the game. These cables will handle bandwidth intensive applications up to 350 Mhz and beyond. Each comes UL verified to meet all Cat 5e TIA/EIA standards, and drastically reduces both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire. These cables...

Description Today's advanced fast ethernet and gigabit computer networks require Enhanced Category 5 high-speed cabling to distribute data, voice and video. Our Enhanced Cat5 350Mhz Crossover Patch Cables will keep you ahead of the game. These cables will handle bandwidth intensive applications up to 350 Mhz and beyond. Each comes UL verified to meet all Cat 5e TIA/EIA standards, and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire! This is...

Description Today's advanced fast ethernet and gigabit computer networks require Enhanced Category 5 high-speed cabling to distribute data, voice and video. Our Enhanced Cat5 100Mhz Crossover Patch Cables will keep you ahead of the game. These cables will handle bandwidth intensive applications up to 100 MHz. Each comes UL verified to meet all Cat 5e TIA/EIA standards. Constructed with high-quality wire and a shortened body plug will keep Near-end Crosstalk (NEXT) levels to a minimum. Our 100MHz...

Connector: 50-micron gold plated RJ-45 Male to Male. Conductor: 4-pair 24 AWG Stranded Copper. Jacket: PVC. Applications:1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3)4/16 Mbps Token Ring (IEEE 802.5); 100 VG-AnyLAN100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM. Designed For: Peer-to-peer, hub-to-hub, transceiver to transceiver or repeater to repeater ethernet connection. Exceeds Category 5e specifications. Wired: TSB 568B (AT&T 258A). Certification: TIA/EIA.