109 results for "2-3/4'' Saw-Tooth Forstner Bit" between $5.00 and $75.00

Pre-sharpened high carbon steel bit is ready to use in any type of wood. Cuts precision flat-bottom holes with no tear-out. 1/2" round shank. Comes in attractive finger-jointed wooden storage box. Max. 480 RPM.

* Diameter 2-3/4". * Depth 2". * Long Lasting - High speed steel tooth can cut over 300 holes before re-sharpening. * Unique Cutting Application - Can cut at angles. * Cuts Faster Than a Self-Feed Bit - 3/8" stubby spade bit helps remove material quickly. * Easy to Use - Easy plug ejection. * Rough Wood Cutting - Cuts wet, frozen, pressure treated, and hardwoods without binding. * Cuts over 300 holes before resharpening.

Series 060 Forstner Bits cut a perfectly flat bottom hole and will bore any part of a circle leaving a true polished surface. Bit can be guided in any direction without regard to the grain of the wood or knots.

Ridgid, 52910, Drill Bits,NA, Accessory, Hole Saws 2-3/4" Bi-Metal Variable Pitch Hole Saw Outperform and outlast traditional standard pitch models. Bi-metal construction with teeth made from specially hardened type M3 high speed steel. The varying teeth height and gullet sizes result in much faster cutting and longer life. For wood; mild, tool and stainless steels; cast iron; brass and aluminum. 51 sizes from 9/16" (14mm) to 6" (152mm). Features: Depth of cut: 1 1/8" (28 mm). Use RIDGID Thread Cutting...

3-1/2¿ overall length, 2-1/8¿ diameter, .375¿ round shank Bores precision holes at any angle Extra sharp cutting edges drill smooth, flat-bottomed holes Fit 3/8¿ drills and drill presses, Weight: 0.45 lbs., Manufacturer: IRWIN

MLCS forstner bits drill clean, perfect holes every time 3-1/4-Inch Diameter High quality steel, Manufacturer: MLCS

This 2 3/4" Forstner bit features a 1/2" shank and is machined from high quality carbon steel. May be used in a drill press and with extra care in a hand drill. These bits cut holes with clean sides and flat bottoms and will not burn if you maintain a speed around 500 rpm. The bit has a saw tooth rim to reduce heat and to minimize larger bits' tendency to burn. Overall bit length 6 1/4".

Drill flat bottomed holes without splintering Drill straight, angled and overlapping holes Precision machined for best results Right hand rotation Covered by Freud's limited lifetime warranty, Weight: 0.09 lbs., Manufacturer: Freud

14 TPI, 2-3/4" length, high-speed steel construction 9/32" width, universal shank 1000 blades per package For cutting metal over 1/4" thick Limited Warranty, Weight: 0.0 lbs., Manufacturer: Milwaukee

Bosch HDG234 2 3/4" Diamond Hole SawBosch HDG234 2 3/4" Diamond Hole Saw Features: • Diamond hole saws are ideal for granite, grade 5 porcelain, stone, marble, glass, travertine and other hard surfaces• Requires water, typically a spray bottle, to remain cool and extend bit life• Segmented Teeth allows water to reach cutting edge reducing debris and heat build-up• AutoStart Centering Pin for walk-free drilling without a pilot hole• Longer life than competitive products&#...

Saw-Toothed 3-1/8-Inch cutting diameter 1/2-Inch shank diameter 6-1/4-Inch overall length, Weight: 2.4 pounds, Manufacturer: Steelex

Cut through steel, tin, aluminum, fiberglass, wood and plastic Deep 1-5/8-Inch cutting depth allows for cutting through 2-Inch by 4-Inch wood studs Extra-tough bi-metal blade Steam oxide finish with no paint to gum up and slow cutting Extra-thick back plate minimizes vibration for smoother, easier, less tiring cutting, Weight: 0.4 lbs., Manufacturer: Greenlee

Coin Sized Forstner Bits

Diamond Products Core Bore 7/8 - 6 Dry Core Bit - Ohio Power Tool

Stern Forstner Bit Set-In 1919 Michael Strasek introduced the trademark "Stern". In 1958 carbide tools were introduced into the production of the company. In 1966 a second plant was established with the most up-to-date equipment. In 1975 numerical control was introduced, and exports were shop to 45 countries. 1989 saw the company's 70th Anniversary. Drawing upon years of experience in making the highest quality Forstner bits available, the Stern bit has been redesigned to include a tooth-like pattern...