114 results for "28 volt power drill" between $10.00 and $1,500.00

Meet EISA 2007 (Energy Independence and Security Act) for 5 ~ 48V

Factory-installed option - not user installable, built in on the bottom case. 10 to 28V DC drive.

Power Relay, Coil Volts 120 VAC, Contact Form DPDT, Contact Amp Rating 30 Resistive, Contact Amp Rating @ 28VDC 40, HP 1 1/2, Length 3.2 In, Width 2.5 In, Height 2.4 In, Screw Terminal, Contact Material Silver Cadmium Oxide, Contact Type Single Make, Volts 600 Max, Operating Temp -22 To 122, Mounting Panel, Application Single Phase Motors, Electric Heaters, HVAC equipment and Signal Lights

Drawing Number: 70188. Power Consumption: 1.5 amps @ 14 VDC; 0.75 amps @ 28 VDC. Weight: 1.8 lbs. (816gm). Length: 5.0” (127mm). Width: 3.12” (79mm). Height: 3.06” (78mm).

Drawing Number: 90101. Power Consumption: 4 amps @ 14 VDC; 2 amps @ 28 VDC. Weight: 1.7 lbs. (771gm). Length: 5.0” (127mm). Width: 3.12” (79mm). Height: 3.50” (89mm).

The STRIKEIT1 from Altronix is a dual channel panic device power controller unit that is designed to provide 24VDC power for a maximum of two electrified panic devices with very high inrush requirements.Each channel in the STRIKEIT1 has an adjustable relock delay input that controls a pair of doors simultaneously or independently control two single doors. The unit also has two sets of relays per channel which can be configured to trigger external relays, automatic door openers, ADA push plate...

Power Relay, Coil Volts 120 Vac, Contact Form Dpdt, Contact Amp Rating 30 Resistive, Contact Amp Rating @ 28vdc 40, Hp 1 1/2, Length 3.2 In, Width 2.5 In, Height 2.4 In, Screw Terminal, Contact Material Silver Cadmium Oxide, Contact Type Single Make, Volts 600 Max, Operating Temp -22 To 122, Mounting Panel, Application Single Phase Motors, Electric Heaters, Hvac Equipment And Signal Lights

Preferred Power Products P3REL-5 6 or 12 VDC/ 5 AMP / 120VAC/ 28 VDC DPDT Contacts

Power Relay, Coil Volts 120 Vac, Contact Form Spdt, Contact Amp Rating 30 Resistive, Contact Amp Rating @ 28vdc 20, Hp 1 1/2, Length 2.5 In, Width 2.5 In, Height 2.2 In, Screw Terminal, Contact Material Silver Cadmium Oxide, Contact Type Single Make, Volts 600 Max, Operating Temp -22 To 122, Mounting Panel, Application Single Phase Motors, Electric Heaters, Hvac Equipment And Signal Lights

Very pleased with Surveillance Video purchase and follow up. The digital recorder arrived with a failed hard drive. Called customer service, and was immediately told a new unit would ship that day. The new unit arrived the next day and UPS took the old one back. That’s what I call customer service. These guys get an all around A+. Thank you Surveillance...

Battery Pack Kit, Nickel Metal Hydride, Voltage 28, For Use With Liftpod 2vll4, 6vmw3, Battery Capacity (ah) 4.0, Includes 2 Hour Fast Charger, (2) 28 Volt Batteries, And Roller Wheel Carrying Case

100 amperes filtered 28 volt supply. Aircraft APU connectors furnished. Operates from 230 VAC, 60 Hz. 8 foot DC cable furnished. Ferro-resonant regulated supply. DC current limited. Front panel meter, controls. Portable, weighs only 64 lb. One year warranty. Extensive testing by FBO's.

Designed for Wide-band High Power applications in the 500 to 1000 MHz frequency range. This amplifier utilizes class A Silicon RF Power MOSFET devices that provide high gain, wide dynamic range and good linearity. High efficiency and reliable operation are being achieved by employing unique RF networks, custom machined housing and heavy duty components. Each unit undergoes extensive burn-in prior to final test and Q/A.

Remark : This battery may be used for most small electronic devices such as film cameras, digital cameras, night-vision scopes, binoculars, flashlight, shavers,...etc., except battery-operated torch with tungsten bulb, or any other devices with a tungsten heating/lighting element.

Model AL300ULB power supply converts a 28VAC/100VA, input, to a 2.5 amp of continuous supply current @ 12VDC or 24VDC. Class 2 Rated power limited output. Dimensions (approximate): 4.1"W x 7.1"L x 1.75"H. Agency Listings UL Recognized Component for Access Control Systems (UL294) Burglar Alarms Systems (UL603) Hospital Signaling and Nurse Call Equipment (UL1069) Power Supplies for Fire Protective Signaling Systems (UL1481) File # S4707 NFPA 72 Compliant Features...

Eight access control system trigger inputs. Options include either eight (8) normally open (NO) inputs, eight (8) open collector sink inputs or any combination. Eight independently controlled outputs. Options include either eight (8) fail - safe and/or fail secure power outputs, eight (8) dry form “C” 5amp rated relay outputs or any combination. Main fuse is rated at 10AMPS. Output fuses rated at 3AMPS. Handles up to 28VAC/24VDC. Eight (8) auxiliary power outputs (un-switched). Red LED’s indicate...