118 results for "28 PSI Single" between $5.00 and $2,000.00

Gas mileage decreases up to 7% with under inflated tires and they can cause blow-outs endangering you and your family.

1/2-Inch NPT female threads Single spray pattern Speedclean anti-lime system Flow rate: 2.5 gpm at 80 psi (9.5 lpm) Infinity brushed nickel finish, Weight: 1.2 pounds, Manufacturer: GROHE

Features: -Price Is For One Each -Minimum Order Of 1. -These brass, single-stage, high-purity regulators are recommended for non-corrosive analytical and process applications where precise flow control is not critical. A specially designed, convoluted, stainless steel diaphragm provides good regulating performance and maximum purity integrity without the need for a soft seal, which often can be a source of contamination. The regulator includes our patented Smart Purifier Base and cartridge on the...

Compact design. Selective trigger system (single fire only or anti-double fire mechanism). Open nose for easy jam clearance. Dial adjustable depth control. Operating pressure: 70-100 PSI. 28 degree angle. Weight: 7.0 lbs. Capacity: 84 nails.

Chrome bezel Spun aluminum center and white illuminated face 2 inch diameter and 2.75 inch depth 270 degree needle sweep 0.125 inch FNPT threads

Direct installation to tank port for tank pressure Direct installation to surface mount for monitor 1/8 inches NPT port (at rear) 1/8 inches female NPT compression fitting needed Reads in PSI and bar

Features: -Price Is For One Each -Minimum Order Of 1. -These single and two-stage positive-seal regulators features convoluted, stainless steel diaphragms that provide maximum sensitivity, minimum droop, and a leak-tight bonnet seal. Type 316 stainless steel internal components are ultra-sonically cleaned and electro-polished to a 15-Ra surface finish for applications where a contamination-free flow stream is critical. A rugged, mechanical linkage connecting the diaphragm and valve stem drastically...

Features: -Price Is For One Each -Minimum Order Of 1. -These ultra-high-pressure regulators are recommended for control of non-corrosive gases supplied in cylinders up to 6,000 psig. The regulators feature a piston sensor which provides increased safety at high delivery pressures. An adjustable vent valve allows the operator to reduce pressure settings in a closed system by venting the downstream pressure through the regulator. These regulators also feature a soft-seated main valve which provides...

This is simply the best performing 120 volt air pump available, inflating and deflating at unprecedented speed. Peak pressure is 2.5 psi, plenty of pressure to get high end inflatable boats, rafts and reinforced backyard items nice and firm. You will immediately notice how they perform better when properly inflated. A Pressure Release Valve is included to limit pressure to 1.5 psi for preventing over-inflating towables, pool toys and other vinyl and nylon covered inflatable items. The accordion-style...

100 degree flat head.Low-alloy steel. Rockwell hardness C26 to C32 MIL-S-6050 /AMS6300, 125,000 PSI minimum tensile strength. Cadmium plated per Spec QQ-P-416, Type 2, Class 3. Head marked with a single "X".

The Sandia Sniper is a superior performer with features and capabilities that only Sandia can provide. Arrive on the job with the Sandia Sniper carpet extractor and you arrive with pride, confidence and professionalism. Sandia's dedication to innovative solutions makes your daily task much easier. Compare us to the competition and discover the Sandia difference for yourself.

Single-barb design provides a leak-proof seal. Black nylon offers good tensile strength for general purpose applications, with maximum pressure of 150 psi and temperature range of -50° to 275°F. Natural polypropylene offers good chemical resistance, with maximum pressure of 125 psi, and temperature range of -9°F to 150°F. Natural PVDF (Polyvinylidene Fluoride) provides the ultimate chemical and abrasive resistance and strength, with maximum pressure of 260 psi and temperature range of -80° to 226°F.

Enclosure: Switch actuator and bracket steel: irridite finish; adjusting cap and body: zinc alloy chromate finish; switch shield: mylar

Powr-Flite PFX-NS Double Bend 125 PSI Single Jet Wand Single brass tip Up to 125PSIPolyethylene valve 1 1/2" Diameter tube Stainless steel tube & head Adjustable stainless steel handle Overspray wing design

A: This model will increase the water inlet temperature by a maximum of 120 F degrees. You can put up to 104 F degree water into this machine. Therefore the max temperature this machine can put out is 224 F degrees. However, it all depends on the temperature of your supply water.

3000 PSI SINGLE BRAID PRESSURE WASHER HOSE ASSEMBLY 50' x 3/8" 3/8" MPT RIGID/SWIVEL

The King Cobras's, patent pending, built-in 25' hose reel, wand and chemical storage system makes the King Cobra an integrated carpet cleaning solution. This carpet extractor cleans more effectively because it creates instant heated water to 212° at the wand tip and maintains it. The solid state heat management system and a low moisture system helps carpets dry faster, saving precious time and labor. Other features include a Smart Circuit Locator that automatically locates separate lines to eliminate...

-6061-T6 Billet Aluminum Ports. CNC-Machined, Molded-in and sealed to the plate. Won't spin or pull out. These are NOT your off the shelf inserts. Designed and built specifically for the SS series of Airsprings from Slam Specialties.