|
Advance Tabco SFLAG-302-X 24 in Work Table, 30 D x 35-1/2 in H, All Stainless Steel, 1-1/2 in Rear Splash
24" long. 30" deep. 35-1/2" high. 18 gauge, 430 stainless steel. 1-1/2" rear backsplash. Adjustable undershelf. 
|
$253.17
|
Top stores
KaTom Restaurant Supply
$253.17
|
|
Paisley Trim Brushed Steel Plug-In Swing Arm Wall Light
Add contemporary style with this sleek swing arm wall light. It features a brushed steel finish, adjustable swing arm, and built-in dimmer switch. A diffuser at the bottom of the drum shade prevents glare. Plug-in style wall lamp.
|
$129.99
|
Top stores
ShopBathroomLighting.com
$129.99
|
|
Eagle Group 414-18-1-18L-X
Eagle One-Compartment Sink, model with 2?-wide “Euro-Style” edging on front and sides. Sink bowl is heavy gauge type 304 stainless steel, with 13-1/2" water level,. deep drawn, seamless and have all corners coved. Top— including backsplash, and drainboards (when required)—is heavy gauge type 430 stainless steel. Drainboards shall be “V” creased for positive drainage. 9-1/2" high backsplash with 1" upturn and tile edge. Legs to be 1-5/8" O.D. galvanized tubing with front-to-back crossbracing...
|
$677.69
|
Top stores
MyChefStore.com
$677.69
|
|
|
Advance Tabco SFLAG-248-X 96 in Work Table, 24 D x 35-1/2 in H, All Stainless Steel, 1-1/2 in Rear Splash
Thank you so much for my order of the sugar bowls. I am so very impressed with the speed and efficiency of your company. The notice I received today that the package was delivered and left at the front desk was most impressive., and unusual.
|
$485.86
|
Top stores
KaTom Restaurant Supply
$485.86
|
|
Eagle Group 414-24-3-24L-X
Sink bowls: Heavy gauge type 304 stainless steel. Top: Drainboards, backsplash and euro-style edging are heavy gauge type 430 stainless steel. Legs: 1 5/8"-diameter heavy-gauge galvanized tubing with plated 12-gauge gussets and high-impact corrosion resistant fully adjustable bullet feet - crossbracing is 1"-diameter heavy-gauge galvanized tubing. All bowls have deep-drawn one-piece seamless construction, using state-of-the-art hydraulic presses. Sink bowls have generous radius with minimum dimension...
|
$1,657.74
|
Top stores
MyChefStore.com
$1,657.74
|
|
Eagle Group 414-18-2-18L-X
All Eagle sinks bearing the NSF Certification Mark are built in compliance with the National Sanitation Foundation Standard Number 2. Sink bowl is heavy gauge type 304 stainless steel. All bowls have deep-drawn one-piece seamless construction using state-of-the-art hydraulic presses. 13 1/2" water level 16 1/2" flood level. Drainboards, backsplash and euro-style edging, rolled rims are heavy gauge type 430 stainless steel. 9 3/4" high backsplash includes 1" upturn and tile edge for easy installation...
|
$960.84
|
Top stores
MyChefStore.com
$960.84
|
|
|
Advance Tabco SFLAG-243-X 36 in Work Table, 24 D x 35-1/2 in H, All Stainless Steel, 1-1/2 in Rear Splash
36" long. 24" deep. 35-1/2" high. 18 gauge, 430 stainless steel. 1-1/2" rear backsplash. Adjustable undershelf.
|
$257.47
|
Top stores
KaTom Restaurant Supply
$257.47
|
|
Eagle Group 414-18-3-18R-X
Eagle Three-Compartment Sink, with 2"-wide “Euro-Style” edging on front and sides. Sink bowls are heavy gauge type 304 stainless steel, with 13-1/2" water level, deep drawn, seamless and have all corners coved. Top— including backsplash, and drainboards (when required)—is heavy gauge type 430 stainless steel. Drainboards shall be “V” creased for positive drainage. 9-1/2" high backsplash with 1" upturn and tile edge. Legs to be 1-5/8" O.D. galvanized tubing with front-to-back crossbracing, and...
|
$1,209.35
|
Top stores
MyChefStore.com
$1,209.35
|
|
Eagle Group 414-24-2-24-X
All Eagle sinks bearing the NSF Certification Mark are built in compliance with the National Sanitation Foundation Standard Number 2. Sink bowl is heavy gauge type 304 stainless steel. All bowls have deep-drawn one-piece seamless construction using state-of-the-art hydraulic presses. 13 1/2" water level 16 1/2" flood level. Drainboards, backsplash and euro-style edging, rolled rims are heavy gauge type 430 stainless steel. 9 3/4" high backsplash includes 1" upturn and tile edge for easy installation...
|
$1,155.87
|
Top stores
MyChefStore.com
$1,155.87
|
|
|
Eagle Group 414-24-3-24R-X
Eagle Three-Compartment Sink, with 2"-wide “Euro-Style” edging on front and sides. Sink bowls are heavy gauge type 304 stainless steel, with 13-1/2" water level, deep drawn, seamless and have all corners coved. Top— including backsplash, and drainboards (when required)—is heavy gauge type 430 stainless steel. Drainboards shall be “V” creased for positive drainage. 9-1/2" high backsplash with 1" upturn and tile edge. Legs to be 1-5/8" O.D. galvanized tubing with front-to-back crossbracing, and...
|
$1,657.74
|
Top stores
MyChefStore.com
$1,657.74
|
|
Eagle Group 414-18-3-24-X
Eagle Three-Compartment Sink, with 2"-wide “Euro-Style” edging on front and sides. Sink bowls are heavy gauge type 304 stainless steel, with 13-1/2" water level, deep drawn, seamless and have all corners coved. Top— including backsplash, and drainboards (when required)—is heavy gauge type 430 stainless steel. Drainboards shall be “V” creased for positive drainage. 9-1/2" high backsplash with 1" upturn and tile edge. Legs to be 1-5/8" O.D. galvanized tubing with front-to-back crossbracing, and...
|
$1,451.30
|
Top stores
MyChefStore.com
$1,451.30
|
|
|
Eagle Group 414-24-3-24-X
Eagle Three-Compartment Sink, with 2"-wide “Euro-Style” edging on front and sides. Sink bowls are heavy gauge type 304 stainless steel, with 13-1/2" water level, deep drawn, seamless and have all corners coved. Top— including backsplash, and drainboards (when required)—is heavy gauge type 430 stainless steel. Drainboards shall be “V” creased for positive drainage. 9-1/2" high backsplash with 1" upturn and tile edge. Legs to be 1-5/8" O.D. galvanized tubing with front-to-back crossbracing, and...
|
$1,805.25
|
Top stores
MyChefStore.com
$1,805.25
|
|
|
Eagle Group 414-16-3-24-X
Eagle Three-Compartment Sink, with 2"-wide “Euro-Style” edging on front and sides. Sink bowls are heavy gauge type 304 stainless steel, with 13-1/2" water level, deep drawn, seamless and have all corners coved. Top— including backsplash, and drainboards (when required)—is heavy gauge type 430 stainless steel. Drainboards shall be “V” creased for positive drainage. 9-1/2" high backsplash with 1" upturn and tile edge. Legs to be 1-5/8" O.D. galvanized tubing with front-to-back crossbracing, and...
|
$1,243.61
|
Top stores
MyChefStore.com
$1,243.61
|
|
|
Eagle Group 414-18-1-18R-X
Eagle One-Compartment Sink, model with 2?-wide “Euro-Style” edging on front and sides. Sink bowl is heavy gauge type 304 stainless steel, with 13-1/2" water level,. deep drawn, seamless and have all corners coved. Top— including backsplash, and drainboards (when required)—is heavy gauge type 430 stainless steel. Drainboards shall be “V” creased for positive drainage. 9-1/2" high backsplash with 1" upturn and tile edge. Legs to be 1-5/8" O.D. galvanized tubing with front-to-back crossbracing...
|
$677.69
|
Top stores
MyChefStore.com
$677.69
|
|
Eagle Group 414-18-1-X
Eagle One-Compartment Sink, model with 2?-wide “Euro-Style” edging on front and sides. Sink bowl is heavy gauge type 304 stainless steel, with 13-1/2" water level,. deep drawn, seamless and have all corners coved. Top— including backsplash, and drainboards (when required)—is heavy gauge type 430 stainless steel. Drainboards shall be “V” creased for positive drainage. 9-1/2" high backsplash with 1" upturn and tile edge. Legs to be 1-5/8" O.D. galvanized tubing with front-to-back crossbracing...
|
$502.54
|
Top stores
MyChefStore.com
$502.54
|
|
|
Eagle Group 414-18-2-X
All Eagle sinks bearing the NSF Certification Mark are built in compliance with the National Sanitation Foundation Standard Number 2. Sink bowl is heavy gauge type 304 stainless steel. All bowls have deep-drawn one-piece seamless construction using state-of-the-art hydraulic presses. 13 1/2" water level 16 1/2" flood level. Drainboards, backsplash and euro-style edging, rolled rims are heavy gauge type 430 stainless steel. 9 3/4" high backsplash includes 1" upturn and tile edge for easy installation...
|
$885.16
|
Top stores
MyChefStore.com
$885.16
|
|
|
Eagle Group 414-18-3-18-X
Eagle Three-Compartment Sink, with 2"-wide “Euro-Style” edging on front and sides. Sink bowls are heavy gauge type 304 stainless steel, with 13-1/2" water level, deep drawn, seamless and have all corners coved. Top— including backsplash, and drainboards (when required)—is heavy gauge type 430 stainless steel. Drainboards shall be “V” creased for positive drainage. 9-1/2" high backsplash with 1" upturn and tile edge. Legs to be 1-5/8" O.D. galvanized tubing with front-to-back crossbracing, and...
|
$1,288.33
|
Top stores
MyChefStore.com
$1,288.33
|
|
Eagle Group 414-24-3-X
Eagle Three-Compartment Sink, with 2"-wide “Euro-Style” edging on front and sides. Sink bowls are heavy gauge type 304 stainless steel, with 13-1/2" water level, deep drawn, seamless and have all corners coved. Top— including backsplash, and drainboards (when required)—is heavy gauge type 430 stainless steel. Drainboards shall be “V” creased for positive drainage. 9-1/2" high backsplash with 1" upturn and tile edge. Legs to be 1-5/8" O.D. galvanized tubing with front-to-back crossbracing, and...
|
$1,538.64
|
Top stores
MyChefStore.com
$1,538.64
|
|
Eagle Group B2CT-18-X
Design and Construction Features:. New bullnose front edge. Units are modular, allowing for custom configurations of underbar equipment using standard components. 22 gauge type 304 stainless steel body (front and ends). Ice bins are 8", 12", or 16" deep (203, 305, or 406mm) . Fabricated ice bin available with ice capacity of 63 lbs. (8"-deep bins), 94 lbs. (12"-deep bins), or 125 lbs. (16?-deep bins). Bottom and back panels are galvanized steel construction. Brushed stainless steel finish...
|
$358.04
|
Top stores
MyChefStore.com
$358.04
|
|
Advance Tabco SFLAG-244-X Work Table, 24" wide top, 1-1/2" splash, 48" long, stainless steel frame
Work Table, 24" wide top, 1-1/2" splash, 48" long, stainless steel frame & adjustable undershelf, heavy gauge, type 430 stainless steel top
|
$295.90
Restaurant Equipment Solutions
|
Top stores
Restaurant Equipment Solutions
$295.90
|
|
|
Advance Tabco SFLAG-242-X 24 in Work Table, 24 in D x 35-1/2 in H, All Stainless Steel, 1-1/2' Rear Splash
24" Work Table, 24" D top, 1-1/2" back splash, 35-1/2" H, stainless steel frame & adjustable undershelf, 18 gauge, type 430 stainless steel top. Typically ships in 5-10 days.
|
$245.62
|
Top stores
KaTom Restaurant Supply
$245.62
|
|
|
Advance Tabco SFLAG-246-X 72 in Work Table, 24 D x 35-1/2 in H, All Stainless Steel, 1-1/2 in Rear Splash
72" Work Table, 24" D top, 1-1/2" back splash, 35-1/2" H, stainless steel frame & adjustable undershelf, 18 gauge, type430 stainless steel top. Typically ships in 5-10 days.
|
$384.60
|
Top stores
KaTom Restaurant Supply
$384.60
|
|
|
Advance Tabco SFLAG-240-X 30 in Work Table, 24 in D x 35-1/2 in H, All Stainless Steel, 1-1/2' Rear Splash
I just wanted to take a few minutes to thank you and KaTom for your help and service. My professional waffle maker arrived on time in Florida; then I asked the company to send my packages; a few days ago I received them; recently I tried the waffle maker. It was indeed the right voltage (240v) 'cause it didn't blow everything up, but it did need a plug adaptor (though I knew that so I already had one!). At the end: perfect. Sure we're the only home in Belgium having this wonderful kitchen appliance...
|
$249.93
|
Top stores
KaTom Restaurant Supply
$249.93
|
|
Floor Trough 12" x 24" w/ Stainless Steel Grate, FTG-1224-X
Short Product Description FLOOR TROUGH, 12"W, 24"L, 4"D, 14 GAUGE 304 S/S, INCLUDES S/ S SUBWAY GRATING CONSTRUCTED F ROM 3/16" X 1" BARS, REMOVABLE S/S STRAINER BASKET, 4" O.D.
|
$1,052.13
|
Top stores
Wasserstrom Restaurant Supply
$1,052.13
|
|
Advance Tabco SFLAG-245-X 60 in Work Table, 24 D x 35-1/2 in H, All Stainless Steel, 1-1/2 in Rear Splash
60" long. 24" deep. 35-1/2" high. 18 gauge, 430 stainless steel. 1-1/2" rear backsplash. Adjustable undershelf.
|
$339.35
|
Top stores
KaTom Restaurant Supply
$339.35
|
|
Advance Tabco TFMS-182-X 18" x 24" Equipment Filler Table - Stainless Steel
Advance Tabco's TFMS-182-X Equipment filler table is used between two other tables for stability. The TFMS-182-X features a 1 5/8" sanitary rolled rim edge in front and a 1 1/2" splash of single metal thickness on rear. The top, legs and feet are all made of stainless steel.
|
$605.00
globeequipment.com
|
Top stores
globeequipment.com
$605.00
|
|
Advance Tabco EG-LG-242-X Stainless Steel Equipment Stand
Top is furnished with 1" hemmed edge splash on rear and both sides. Undershelf is adjustable. Aluminum die cast "leg to shelf" clamp secures shelf to leg eliminating unsightly nuts and bolts. Top is 18 gauge stainless steel type "430" series with galvanized understructure. All TIG welded. Shelf is galvanized steel. Legs are 1 5/8" diameter galvanized steel with plastic bullet feet. Maximum load is 400 lbs. Material: Stainless Steel. Dimensions: 24" W x 24" L.
|
$417.55
|
Top stores
Cook's Direct
$417.55
|
|
2H2PBT1 Porcelain Steel Dry Earase Board w Black Presidential Trim 2 X 3
The 2' x 3' Presidential Trim Board features a sleek frame with a smooth, rounded corner that will add a touch of elegance to any setting. This high quality board features the durable and versatile porcelain steel surface with a writing surface and erasing quality that is unsurpassed. The surface is also magnetic allowing it to double as a magnetic bulletin board. The low-gloss surface offers greater contrast for markers. All Presidential Trim Boards include a matching Magnetic Q-Tray to hold markers...
|
$71.95
|
Top stores
Worthington Direct
$71.95
|
|
Advance Tabco TFMS-152-X 15" x 24" Equipment Filler Table - Stainless Steel
Advance Tabco's TFMS-152-X Equipment filler table is used between two other tables for stability. The TFMS-152-X features a 1 5/8" sanitary rolled rim edge in front and a 1 1/2" splash of single metal thickness on rear. The top, legs and feet are all made of stainless steel.
|
$605.00
globeequipment.com
|
Top stores
globeequipment.com
$605.00
|
|
Advance Tabco EG-LG-302-X Stainless Steel Equipment Stand
Top is furnished with 1" hemmed edge splash on rear and both sides. Undershelf is adjustable. Aluminum die cast "leg to shelf" clamp secures shelf to leg eliminating unsightly nuts and bolts. Top is 18 gauge stainless steel type "430" series with galvanized understructure. All TIG welded. Shelf is galvanized steel. Legs are 1 5/8" diameter galvanized steel with plastic bullet feet. Maximum load is 400 lbs. Material: Stainless Steel. Dimensions: 30" W x 24" L.
|
$426.21
|
Top stores
Cook's Direct
$426.21
|
|
Advance Tabco EG-LG-246-X Stainless Steel Equipment Stand
Top is furnished with 1" hemmed edge splash on rear and both sides. Undershelf is adjustable. Aluminum die cast "leg to shelf" clamp secures shelf to leg eliminating unsightly nuts and bolts. Top is 18 gauge stainless steel type "430" series with galvanized understructure. All TIG welded. Shelf is galvanized steel. Legs are 1 5/8" diameter galvanized steel with plastic bullet feet. Maximum load is 400 lbs. Material: Stainless Steel. Dimensions: 24" W x 72" L.
|
$564.95
|
Top stores
Cook's Direct
$564.95
|
|
Advance Tabco EG-LG-244-X Stainless Steel Equipment Stand
Top is furnished with 1" hemmed edge splash on rear and both sides. Undershelf is adjustable. Aluminum die cast "leg to shelf" clamp secures shelf to leg eliminating unsightly nuts and bolts. Top is 18 gauge stainless steel type "430" series with galvanized understructure. All TIG welded. Shelf is galvanized steel. Legs are 1 5/8" diameter galvanized steel with plastic bullet feet. Maximum load is 400 lbs. Material: Stainless Steel. Dimensions: 24" W x 48" L.
|
$503.64
|
Top stores
Cook's Direct
$503.64
|
|
Advance Tabco EG-LG-243-X Stainless Steel Equipment Stand
Top is furnished with 1" hemmed edge splash on rear and both sides. Undershelf is adjustable. Aluminum die cast "leg to shelf" clamp secures shelf to leg eliminating unsightly nuts and bolts. Top is 18 gauge stainless steel type "430" series with galvanized understructure. All TIG welded. Shelf is galvanized steel. Legs are 1 5/8" diameter galvanized steel with plastic bullet feet. Maximum load is 400 lbs. Material: Stainless Steel. Dimensions: 24" W x 36" L.
|
$456.00
|
Top stores
Cook's Direct
$456.00
|
|
Advance Tabco EG-LG-245-X Stainless Steel Equipment Stand
Top is furnished with 1" hemmed edge splash on rear and both sides. Undershelf is adjustable. Aluminum die cast "leg to shelf" clamp secures shelf to leg eliminating unsightly nuts and bolts. Top is 18 gauge stainless steel type "430" series with galvanized understructure. All TIG welded. Shelf is galvanized steel. Legs are 1 5/8" diameter galvanized steel with plastic bullet feet. Maximum load is 400 lbs. Material: Stainless Steel. Dimensions: 24" W x 60" L.
|
$527.48
|
Top stores
Cook's Direct
$527.48
|
|
Advance Tabco FC-1-2424-X One Comp Stainless Steel Sink
Backsplash has tile edge for ease of installation. Sink bowl is 3/4" coved corner and meets NSF requirements. Rolled Rim Edge for additional strength. Sink Bowl is 14" deep for greater capacity. 1 5/8" diameter stainless steel legs. Stainless steel legs with 1" adjustable stainless steel bullet feet. Entire unit is 16 gauge 304 stainless steel. Stainless steel gussets. Waste drains are 1 1/2 IPS S/S basket type, located in center of sink bowl, and are included. Supply is 1/2 IPS hot and...
|
$1,003.07
|
Top stores
Cook's Direct
$1,003.07
|
