|
9e Series Manual Operation Submersible Effluent Pump - 230v, 20'L Cord
The 230 V 9E-CIM manual effluent pump is designed for residential and light commercial use. This pump can be used where small amounts of debris clog normal sump pumps or in effluent pump systems due to its ability to handle 3/4" solids. Continuous duty rated. 12.75 L. 11.25 W. 9.75 H. 
|
$260.95
|
Top stores
Global Industrial
$260.95
|
|
16eh Series Manual Operation Submersible Effluent Pump - 230v
The 230 volt 16EH-CIM high-head effluent pump is designed for residential, commercial and industrial effluent or wastewater transfer. It is a heavy duty, all cast iron pump with sealed ball bearing construction and PSC motor for efficient operation and long life. Continuous duty rated. 22.00 L. 15.25 W. 10.50 H.
|
$697.00
|
Top stores
Global Industrial
$697.00
|
|
Little Giant Pumps 20E-CIM-Pond pump
Pond pump. This pump utilizes epoxy coated cast iron or aluminum housing and contain non-toxic dielectric oil, which provides continuous lubrication for maximum motor life. Submersible High Head Effluent Pump 230V, Manual, 20' Power Cord
|
$1,220.00
pumpbiz.com
|
Top stores
pumpbiz.com
$1,220.00
|
|
Little Giant 509340 Steel 4/10 HP 230V 70 GPM Manual Submersible Sump/Effluent Pump with
4/10 HP 230V 70 GPM Manual Submersible Sump/Effluent Pump The Model 9EH Series De-watering and Effluent pumps are especially designed for residential and light to medium commercial use. Pumps feature a 1-1/2" discharge with head capacity to 32 , glass-filled nylon cover and ABS base.4/10 HP shaded pole motor with overload protectionDesigned for continuous dutyHigh head modelEpoxy coated cast iron housing and cover High impact ABS baseCarbon/ceramic shaft sealUpper sintered sleeve bearings; lower...
|
$235.27
|
Top stores
FaucetDirect. com
$235.27
|
|
FL100 Series Submersible Effluent Pumps 1 Phase, 230 V Manual Pump
* 3/4" solids-handling. * Heavy cast iron construction. * 2 vane semi-open cast iron impeller. * 416 stainless steel rotor shaft. * Dual shaft seals. * Single float, mercury free level control. * Additional mounting clamp provided for optional switch mounting to pipe. * Fully adjustable pumping range. * 2" FNPT threaded discharge with 1 1/2" FNPT flange provided. * Quick-disconnect power cord in 25'.
|
$1,020.00
accentshopping.com
|
Top stores
accentshopping.com
$1,020.00
|
|
Liberty Pumps FL62M Manual Submersible Effluent Pump 6/10HP, 230V, 10' Cord, Cast Iron
Horsepower: 6/10 HP;. Cord length: 10';. Discharge: 1-1/2" FNPT;. Solids Handling: up to 1/2";. Shut-off Head: 63';. Voltage: 208-230V;. Amps: 7;. Hertz: 60 Hz;. Phase: 1;. Maximum fluid temperature: 140°F;. Height: 13.75";. Width: 10.25";. Weight: 57 lbs.;. Minimum pit/basin diameter: 14" in Sump and 18" in Effluent applications;. Minimum pit/basin depth: 18" in Sump and 24" in Effluent applications;.
|
$590.94
|
Top stores
pexuniverse.com
$590.94
|
|
Liberty Pumps FL32M Manual Submersible Effluent Pump 1/3HP, 230V, 10' Cord, Cast Iron
Horsepower: 1/3 HP;. Cord length: 10';. Discharge: 1-1/2" FNPT;. Solids Handling: up to 3/4";. Shut-off Head: 19';. Voltage: 208-230V;. Amps: 6.6;. Hertz: 60 Hz;. Phase: 1;. Maximum fluid temperature: 140°F;. Height: 9.6";. Width: 9.8";. Weight: 32 lbs.;. Minimum pit/basin diameter: 14" in Sump and 18" in Effluent applications;. Minimum pit/basin depth: 18" in Sump and 24" in Effluent applications;.
|
$269.85
|
Top stores
pexuniverse.com
$269.85
|
|
Liberty Pumps FL52M-2 Manual Submersible Effluent Pump 1/2HP, 230V, 25' Cord, Cast Iron
Horsepower: 1/2 HP;. Cord length: 25';. Discharge: 1-1/2" FNPT;. Solids Handling: up to 1/2";. Shut-off Head: 48';. Voltage: 208-230V;. Amps: 7;. Hertz: 60 Hz;. Phase: 1;. Maximum fluid temperature: 140°F;. Height: 13.75";. Width: 10.25";. Weight: 57 lbs.;. Minimum pit/basin diameter: 14" in Sump and 18" in Effluent applications;. Minimum pit/basin depth: 18" in Sump and 24" in Effluent applications;.
|
$547.06
|
Top stores
pexuniverse.com
$547.06
|
|
Little Giant 9EN-CIM, 4/10 HP, 70 GPM, 230V - Manual Submersible Sump Effluent Pump, 20' power cord (509340)
* Handles liquids and solid waste materials up to 3/4" diameter. * Cast iron pump housing with protective epoxy coating for corrosion resistance. * Oil-filled motor housing for lifetime lubrication and rapid heat dissipation. * Stainless steel screws, bolts and handle and seal assembly. * Mechanical seals (stainless steel spring, nitrile parts, carbon and ceramic faces). * Bearings: Upper Sintered Sleave Bearing and Lower Ball Bearing. * Thermal overload protection. * Manual operation. *...
|
$282.49
|
Top stores
PlumberSurplus.com
$282.49
|
|
9E-CIM 4/10 HP, 57 GPM, 230V - Manual Submersible Sump Effluent Pump, 15ft power cord
Handles liquid and solid waste materials up to 3/4" diameter. 1-1/2" Discharge. Cast iron pump housing with protective epoxy coating for corrosion and rust resistance. Oil filled motor housing for lifetime lubrication and rapid heat dissipation. Stainless steel screws, bolts, handle, and seal assembly. Mechanical seals (stainless steel spring, nitrile parts, carbon and ceramic faces). Thermal overload protection. Manual operation.
|
$237.95
|
Top stores
pexsupply.com
$237.95
|
|
Liberty Pumps FL153M Manual Submersible Effluent Pump 1-1/2HP, 230V, 25' Cord, Cast Iron, 3 Phase
Horsepower: 1-1/2HP;. Cord length: 25';. Discharge: 2" FNPT with 1-1/2" FNPT cast iron flange (included);. Solids Handling: up to 3/4";. Shut-off Head: 110';. Voltage: 208-230V;. RPM: 3450;. Amps: 10.6;. Hertz: 60 Hz;. Phase: 3;. Impeller: 2 vane, semi-open design;. Maximum fluid temperature: 140°F;. Weight: 82 lbs.;. Minimum pit/basin diameter: 14" in Sump and 18" in Effluent applications;. Minimum pit/basin depth: 18" in Sump and 24" in Effluent applications;.
|
$906.87
|
Top stores
pexuniverse.com
$906.87
|
|
Liberty Pumps FL52M Manual Submersible Effluent Pump 1/2HP, 230V, 10' Cord, Cast Iron
Horsepower: 1/2 HP;. Cord length: 10';. Discharge: 1-1/2" FNPT;. Solids Handling: up to 1/2";. Shut-off Head: 48';. Voltage: 208-230V;. Amps: 7;. Hertz: 60 Hz;. Phase: 1;. Maximum fluid temperature: 140°F;. Height: 13.75";. Width: 10.25";. Weight: 57 lbs.;. Minimum pit/basin diameter: 14" in Sump and 18" in Effluent applications;. Minimum pit/basin depth: 18" in Sump and 24" in Effluent applications;.
|
$537.83
|
Top stores
pexuniverse.com
$537.83
|
|
Liberty Pumps FL62M-2 Manual Submersible Effluent Pump 6/10HP, 230V, 25' Cord, Cast Iron
Horsepower: 6/10 HP;. Cord length: 25';. Discharge: 1-1/2" FNPT;. Solids Handling: up to 1/2";. Shut-off Head: 63';. Voltage: 208-230V;. Amps: 7;. Hertz: 60 Hz;. Phase: 1;. Maximum fluid temperature: 140°F;. Height: 13.75";. Width: 10.25";. Weight: 57 lbs.;. Minimum pit/basin diameter: 14" in Sump and 18" in Effluent applications;. Minimum pit/basin depth: 18" in Sump and 24" in Effluent applications;.
|
$599.71
|
Top stores
pexuniverse.com
$599.71
|
|
Liberty Pumps FL203M Manual Submersible Effluent Pump 2HP, 230V, 25' Cord, Cast Iron, 3 Phase
Horsepower: 2HP;. Cord length: 25';. Discharge: 2" FNPT with 1-1/2" FNPT cast iron flange (included);. Solids Handling: up to 3/4";. Shut-off Head: 130';. Voltage: 208-230V;. RPM: 3450;. Amps: 10.6;. Hertz: 60 Hz;. Phase: 3;. Impeller: 2 vane, semi-open design;. Maximum fluid temperature: 140°F;. Weight: 82 lbs.;. Minimum pit/basin diameter: 14" in Sump and 18" in Effluent applications;. Minimum pit/basin depth: 18" in Sump and 24" in Effluent applications;.
|
$945.83
|
Top stores
pexuniverse.com
$945.83
|
|
Liberty Pumps 280HV Manual Submersible Effluent Pump 1/2HP, 230V, 10' Cord, Cast Iron
Horsepower: 1/2 HP;. Cord length: 10';. Discharge: 1-1/2";. Solids Handling: up to 3/4";. Shut-off Head: 37';. Voltage: 208-230V;. RPM: 3450;. Amps: 4.6;. Hertz: 60 Hz;. Phase: 1;. Maximum fluid temperature: 140°F;. Height: 13";. Width: 10";. Weight: 29 lbs.;. Minimum pit/basin diameter: 14" in Sump and 18" in Effluent applications;. Minimum pit/basin depth: 18" in Sump and 24" in Effluent applications;.
|
$245.85
|
Top stores
pexuniverse.com
$245.85
|
|
3/4" Submersible Effluent Pump - 0.5HP, 3500RPM, 230V, 7.3 Amps
This effluent pump is made with cast iron, volute type casing with 2" NPT discharge for maximum efficiency. Semi-open, non-clog cast iron impeller has pump-out vanes for mechanical seal protection. Impeller is balanced for smooth operation. Includes 300 series stainless steel fasteners. Effluent pumps are capable of running dry without damage to components. Withstands solids up to 3/4". Continuous-duty motor is fully submerged in high grade turbine oil for lubrication and efficient heat transfer...
|
$586.00
|
Top stores
Global Industrial
$586.00
|
|
Liberty Pumps 280HV-2 Manual Submersible Effluent Pump 1/2HP, 230V, 25' Cord, Cast Iron
Horsepower: 1/2 HP;. Cord length: 25';. Discharge: 1-1/2";. Solids Handling: up to 3/4";. Shut-off Head: 37';. Voltage: 208-230V;. RPM: 3450;. Amps: 4.6;. Hertz: 60 Hz;. Phase: 1;. Maximum fluid temperature: 140°F;. Height: 13";. Width: 10";. Weight: 29 lbs.;. Minimum pit/basin diameter: 14" in Sump and 18" in Effluent applications;. Minimum pit/basin depth: 18" in Sump and 24" in Effluent applications;.
|
$249.85
|
Top stores
pexuniverse.com
$249.85
|
|
Liberty Pumps FL102M Manual Submersible Effluent Pump 1HP, 230V, 25' Cord, Cast Iron
Horsepower: 1HP;. Cord length: 25';. Discharge: 2" FNPT with 1-1/2" FNPT cast iron flange (included);. Solids Handling: up to 3/4";. Shut-off Head: 90';. Voltage: 208-230V;. RPM: 3450;. Amps: 12;. Hertz: 60 Hz;. Phase: 1;. Impeller: 2 vane, semi-open design;. Maximum fluid temperature: 140°F;. Weight: 72 lbs.;. Minimum pit/basin diameter: 14" in Sump and 18" in Effluent applications;. Minimum pit/basin depth: 18" in Sump and 24" in Effluent applications;.
|
$713.66
|
Top stores
pexuniverse.com
$713.66
|
|
Liberty Pumps FL103M Manual Submersible Effluent Pump 1HP, 230V, 25' Cord, Cast Iron, 3 Phase
Horsepower: 1HP;. Cord length: 25';. Discharge: 2" FNPT with 1-1/2" FNPT cast iron flange (included);. Solids Handling: up to 3/4";. Shut-off Head: 90';. Voltage: 208-230V;. RPM: 3450;. Amps: 9;. Hertz: 60 Hz;. Phase: 3;. Impeller: 2 vane, semi-open design;. Maximum fluid temperature: 140°F;. Weight: 72 lbs.;. Minimum pit/basin diameter: 14" in Sump and 18" in Effluent applications;. Minimum pit/basin depth: 18" in Sump and 24" in Effluent applications;.
|
$794.68
|
Top stores
pexuniverse.com
$794.68
|
|
Liberty Pumps FL152M Manual Submersible Effluent Pump 1-1/2HP, 230V, 25' Cord, Cast Iron
Horsepower: 1-1/2HP;. Cord length: 25';. Discharge: 2" FNPT with 1-1/2" FNPT cast iron flange (included);. Solids Handling: up to 3/4";. Shut-off Head: 110';. Voltage: 208-230V;. RPM: 3450;. Amps: 15;. Hertz: 60 Hz;. Phase: 1;. Impeller: 2 vane, semi-open design;. Maximum fluid temperature: 140°F;. Weight: 82 lbs.;. Minimum pit/basin diameter: 14" in Sump and 18" in Effluent applications;. Minimum pit/basin depth: 18" in Sump and 24" in Effluent applications;.
|
$826.95
|
Top stores
pexuniverse.com
$826.95
|
|
Liberty Pumps FL202M Manual Submersible Effluent Pump 2HP, 230V, 25' Cord, Cast Iron
Horsepower: 2HP;. Cord length: 25';. Discharge: 2" FNPT with 1-1/2" FNPT cast iron flange (included);. Solids Handling: up to 3/4";. Shut-off Head: 130';. Voltage: 208-230V;. RPM: 3450;. Amps: 15;. Hertz: 60 Hz;. Phase: 1;. Impeller: 2 vane, semi-open design;. Maximum fluid temperature: 140°F;. Weight: 82 lbs.;. Minimum pit/basin diameter: 14" in Sump and 18" in Effluent applications;. Minimum pit/basin depth: 18" in Sump and 24" in Effluent applications;.
|
$895.85
|
Top stores
pexuniverse.com
$895.85
|
|
Liberty Pumps FL32M-2 Manual Submersible Effluent Pump 1/3HP, 230V, 25' Cord, Cast Iron
Horsepower: 1/3 HP;. Cord length: 25';. Discharge: 1-1/2" FNPT;. Solids Handling: up to 3/4";. Shut-off Head: 19';. Voltage: 208-230V;. Amps: 6.6;. Hertz: 60 Hz;. Phase: 1;. Maximum fluid temperature: 140°F;. Height: 9.6";. Width: 9.8";. Weight: 32 lbs.;. Minimum pit/basin diameter: 14" in Sump and 18" in Effluent applications;. Minimum pit/basin depth: 18" in Sump and 24" in Effluent applications;.
|
$275.85
|
Top stores
pexuniverse.com
$275.85
|
|
9EH-CIM 4/10 HP, 70 GPM, 230V - Manual Submersible Sump Effluent Pump, 20ft power cord
Handles liquids and solid waste materials up to 3/4" diameter. Cast iron pump housing with protective epoxy coating for corrosion resistance. Oil-filled motor housing for lifetime lubrication and rapid heat dissipation. Stainless steel screws, bolts and handle and seal assembly. Mechanical seals (stainless steel spring, nitrile parts, carbon and ceramic faces). Bearings: Upper Sintered Sleave Bearing and Lower Ball Bearing. Thermal overload protection. Manual operation. 1-1/2" Discharge.
|
$234.95
|
Top stores
pexsupply.com
$234.95
|
|
3/4" Submersible Effluent Pump - 1.5HP, 3500RPM, 230V, 9.2 Amps
This effluent pump is made with cast iron, volute type casing with 2" NPT discharge for maximum efficiency. Semi-open, non-clog cast iron impeller has pump-out vanes for mechanical seal protection. Impeller is balanced for smooth operation. Includes 300 series stainless steel fasteners. Effluent pumps are capable of running dry without damage to components. Withstands solids up to 3/4". Continuous-duty motor is fully submerged in high grade turbine oil for lubrication and efficient heat transfer...
|
$867.00
|
Top stores
Global Industrial
$867.00
|
|
8E-CIM 1/3 HP, 52 GPM, 230V - Manual Submersible Sump Effluent Pump, 12ft power cord
Handles liquids and solid waste materials up to 3/4" diameter. Cast iron pump housing with protective epoxy coating for corrosion and rust resistance. Oil filled motor housing for lifetime lubrication and rapid hear dissipation. Stainless steel screws, bolts, handle, and seal assembly. Mechanical seals (stainless steel spring, nitrile parts, carbon and ceramic faces). Thermal overload protection. Manual and Automatic modes in each size. Automatic operation has 9" - 14" "On" level and 2" -...
|
$184.19
|
Top stores
pexsupply.com
$184.19
|
|
Little Giant 514630 Steel 1 HP 160 GPM 230V Manual Submersible Sewage Ejector Pump with 4
1 HP 160 GPM 230V Manual Submersible Sewage Ejector Pump with 40 Power Cord The Dominator(R) submersible pump series from Little Giant is specifically engineered to handle the tough, demanding tasks of effluent and sewage waste transfer with high efficiency and long term dependability. For use in residential, commercial, industrial and agricultural applications with light to medium transfer demands. Applications include dewatering, effluent waste, wastewater and sewage handling where such materials...
|
$706.91
|
Top stores
Build.com
$706.91
|
|
Little Giant 514620 Steel 1 HP 160 GPM 230V Manual Submersible Sewage Ejector Pump 514620
1 HP 160 GPM 230V Manual Submersible Sewage Ejector Pump The Eliminator(R) submersible pump series from Little Giant is specifically engineered to handle the tough, demanding tasks of effluent and sewage waste transfer with high efficiency and long term dependability. For use in residential, commercial, industrial and agricultural applications with light to medium transfer demands. Applications include dewatering, effluent waste, wastewater and sewage handling where such materials must be moved...
|
$702.45
|
Top stores
Build.com
$702.45
|
|
Little Giant 509450 Steel 80 GPM 230V Manual Submersible Sewage Ejector Pump with 15ft. P
80 GPM 230V Manual Submersible Sewage Ejector Pump with 15 Power Cord - No Plug The Dominator submersible pump series from Little Giant is specifically engineered to handle the tough, demanding tasks of effluent and sewage waste transfer with high efficiency and long term dependability. For use in residential, commercial, industrial and agricultural applications with light to medium transfer demands. Applications include dewatering, effluent waste, wastewater and sewage handling where such materials...
|
$274.29
|
Top stores
FaucetDirect. com
$274.29
|
