286 results for "2 post lifts" between $300.00 and $10,000.00

286 2 post lifts $300.00 $10,000.00 /l/2-post-lifts
BendPak XPR-9FS 2 Post Lifts
BendPak XPR-9FS 2 Post Lifts

Lifting capacity*: 9,000 lbs. / 4,082 kg *Max capacity / front axel: 4,500 lbs. / 2,041 kg *Max capacity / rear axel: 4,500 lbs. / 2,041 kg. Overall height: 113" / 2,870 mm. Overall width (outside of base plate): 132" / 3,353 mm. Width (outside of columns): 124" / 3,150 mm. Cover height: 2" / 51 mm. Inside columns: 102" / 2,591 mm. Front arm min reach: 25" / 635 mm. Front arm max reach: 46" / 1,168 mm. Rear arm min reach: 34" / 864 mm. Rear arm max reach: 55" / 1,397 mm. Min pad height...

$2,650.00
equiptool.com
Top stores
equiptool.com
$2,650.00
BendPak XPR-9FDX 2 Post Vehicle Lift 9,000 Lb. Capacity/Floorplate/Direct-Drive/Wide
BendPak XPR-9FDX 2 Post Vehicle Lift 9,000 Lb. Capacity/Floorplate/Direct-Drive/Wide

Lifting capacity: 9,000 lbs. / 4082 kg. Max capacity / front axle: 4,500 lbs. / 2041 kg. Max capacity / rear axle: 4,500 lbs. / 2041 kg. Overall height: 145" / 3,683 mm. Overall width (outside of base plate): 145" / 3,683 mm. Width (outside of columns): 137" / 3,480 mm. Cover height: 2" / 51 mm. Inside columns: 115" / 2,921 mm. Front arm min reach: 25-1/2" / 648 mm. Front arm max reach: 49-1/2" / 1,257 mm. Rear arm min reach: 32-1/2" / 825 mm. Rear arm max reach: 52-1/2" / 1,333 mm. Min...

$3,549.95
thegaragedealer.com
Top stores
thegaragedealer.com
$3,549.95
Bendpak XPR-10ACX 2 Post Vehicle Lift 10,000 lb. Capacity/Asymmetric Clearfloor/Wide
Bendpak XPR-10ACX 2 Post Vehicle Lift 10,000 lb. Capacity/Asymmetric Clearfloor/Wide

Lifting capacity: 10,000 lbs. / 4,536 kg. Max capacity / front axle: 5,000 lbs. / 2,268 kg. Max capacity / rear axle: 5,000 lbs. / 2,268 kg. Overall height: 145" / 3,683 mm. Overall width (outside of base plate): 132" / 3,353 mm. Width (outside of columns): 126" / 3,150 mm. Floor to overhead switch: 141" / 3,581 mm. Inside columns: 102" / 2,591 mm. Front arm min reach: 23-1/2” / 597 mm. Front arm max reach: 43-3/4" / 1,111 mm. Rear arm min reach: 32-1/2" / 825 mm. Rear arm max reach: ...

$3,459.95
thegaragedealer.com
Top stores
thegaragedealer.com
$3,459.95
Bendpak XPR-10CX-168 2 Post Vehicle Lift 10,000 lb. Capacity/Clearfloor/Wide/168" Height
Bendpak XPR-10CX-168 2 Post Vehicle Lift 10,000 lb. Capacity/Clearfloor/Wide/168" Height

Lifting capacity: 10,000 lbs. / 4,536 kg. Max capacity / front axle: 5,000 lbs. / 2,268 kg. Max capacity / rear axle: 5,000 lbs. / 2,268 kg. Overall height: 168". Overall width (outside of base plate): 145" / 3,683 mm. Width (outside of columns): 137" / 3,480 mm. Floor to overhead switch: 141" / 3,581 mm. Inside columns: 115" / 2,921 mm. Front arm min reach: 25-1/2" / 648 mm. Front arm max reach: 49-1/2" / 1,257 mm. Rear arm min reach: 32-1/2" / 825 mm. Rear arm max reach: 52-1/2" / 1...

$3,769.95
thegaragedealer.com
Top stores
thegaragedealer.com
$3,769.95
Bendpak XPR-18C 2 Post Vehicle Lift 18,000 lb. Capacity/Clearfloor/Standard Arms
Bendpak XPR-18C 2 Post Vehicle Lift 18,000 lb. Capacity/Clearfloor/Standard Arms

Lifting capacity: 18,000 lbs. / 8,165 kg. Max capacity / front axle: 9,000 lbs. / 4,082 kg. Max capacity / rear axle: 9,000 lbs. / 4,082 kg. Overall height: 170" / 4,318 mm. Overall width (outside of base plate): 155" / 3,937 mm. Width (outside of columns): 144" / 3,658 mm. Floor to overhead switch: 165" / 4,191 mm. Inside columns: 120" / 3,048 mm. Front arm min reach: 39" / 991 mm. Front arm max reach: 60" / 1,524 mm. Rear arm min reach: 39" / 991 mm. Rear arm max reach: 60" / 1,524 mm...

$8,869.95
thegaragedealer.com
Top stores
thegaragedealer.com
$8,869.95
Tiger 2 Post Lifts - Tiger T-11AC 2 Post Lift - Tiger 2 Post Lifts for Cars & Trucks
Tiger 2 Post Lifts - Tiger T-11AC 2 Post Lift - Tiger 2 Post Lifts for Cars & Trucks

Capacity 11,000 lbs. Lifting speed 50 seconds. Motor rating 2HP 220V 20A. Lifting height 70.25" with adapters 76". Low pad height 4.5". Width overall 137". Width between columns 110.5". Drive thru 90.5". Height overall 141" or 145.5". Shipping weight 1812 lbs.

$2,050.00
equiptool.com
Top stores
equiptool.com
$2,050.00
Bendpak XPR-10C 2 Post Vehicle Lift 10,000 lb. Capacity/Clearfloor/Narrow
Bendpak XPR-10C 2 Post Vehicle Lift 10,000 lb. Capacity/Clearfloor/Narrow

Lifting capacity: 10,000 lbs. / 4,536 kg. Max capacity / front axle: 5,000 lbs. / 2,268 kg. Max capacity / rear axle: 5,000 lbs. / 2,268 kg. Overall height: 145" / 3,683 mm. Overall width (outside of base plate): 132" / 3,353 mm. Width (outside of columns): 126" / 3,200 mm. Floor to overhead switch: 141" / 3,581 mm. Inside columns: 99" / 2,515 mm. Front arm min reach: 23-1/2" / 597 mm. Front arm max reach: 43-3/4" / 1,111 mm. Rear arm min reach: 40-1/2" / 1,029 mm. Rear arm max reach:...

$3,389.95
thegaragedealer.com
Top stores
thegaragedealer.com
$3,389.95
Bendpak XPR-10AC 2 Post Vehicle Lift 10,000 lb. Capacity/Asymmetric Clearfloor/Narrow
Bendpak XPR-10AC 2 Post Vehicle Lift 10,000 lb. Capacity/Asymmetric Clearfloor/Narrow

Lifting capacity: 10,000 lbs. / 4,536 kg. Max capacity / front axle: 5,000 lbs. / 2,268 kg. Max capacity / rear axle: 5,000 lbs. / 2,268 kg. Overall height: 145" / 3,683 mm. Overall width (outside of base plate): 132" / 3,353 mm. Width (outside of columns): 126" / 3,150 mm. Floor to overhead switch: 141" / 3,581 mm. Inside columns: 102" / 2,591 mm. Front arm min reach: 23-1/2” / 597 mm. Front arm max reach: 43-3/4" / 1,111 mm. Rear arm min reach: 32-1/2" / 825 mm. Rear arm max reach: ...

$3,389.95
thegaragedealer.com
Top stores
thegaragedealer.com
$3,389.95
Bendpak XPR-10C-168 2 Post Vehicle Lift 10,000 lb. Capacity/Clearfloor/Narrow/168" Height
Bendpak XPR-10C-168 2 Post Vehicle Lift 10,000 lb. Capacity/Clearfloor/Narrow/168" Height

Lifting capacity: 10,000 lbs. / 4,536 kg. Max capacity / front axle: 5,000 lbs. / 2,268 kg. Max capacity / rear axle: 5,000 lbs. / 2,268 kg. Overall height: 168". Overall width (outside of base plate): 132" / 3,353 mm. Width (outside of columns): 126" / 3,200 mm. Floor to overhead switch: 141" / 3,581 mm. Inside columns: 99" / 2,515 mm. Front arm min reach: 23-1/2" / 597 mm. Front arm max reach: 43-3/4" / 1,111 mm. Rear arm min reach: 40-1/2" / 1,029 mm. Rear arm max reach: 58" / 1,47...

$3,709.95
thegaragedealer.com
Top stores
thegaragedealer.com
$3,709.95
Bendpak XPR-15C 2 Post Vehicle Lift 15,000 lb. Capacity/Clearfloor/Standard Arms
Bendpak XPR-15C 2 Post Vehicle Lift 15,000 lb. Capacity/Clearfloor/Standard Arms

Lifting capacity: 15,000 lbs. / 6,804 kg. Max capacity / front axle: 7,500 lbs. / 3,402 kg. Max capacity / rear axle: 7,500 lbs. / 3,402 kg. Overall height: 170" / 4,318 mm. Overall width (outside of base plate): 155" / 3,937 mm. Width (outside of columns): 144" / 3,658 mm. Floor to overhead switch: 165" / 4,191 mm. Inside columns: 120" / 3,048 mm. Front arm min reach: 39" / 991 mm. Front arm max reach: 60" / 1,524 mm. Rear arm min reach: 39" / 991 mm. Rear arm max reach: 60" / 1,524 mm...

$8,119.95
thegaragedealer.com
Top stores
thegaragedealer.com
$8,119.95
Bendpak XPR-9FSX 2 Post Vehicle Lift/9,000 Lb. Capacity/Floorplate/Chain-Over/Wide
Bendpak XPR-9FSX 2 Post Vehicle Lift/9,000 Lb. Capacity/Floorplate/Chain-Over/Wide

Lifting capacity: 9,000 lbs. / 4,082 kg. Max capacity / front axel: 4,500 lbs. / 2,041 kg. Max capacity / rear axel: 4,500 lbs. / 2,041 kg. Overall height: 113" / 2,870 mm. Overall width (outside of base plate): 145" / 3,683 mm. Width (outside of columns): 137" / 3,480 mm. Cover height: 2" / 51 mm. Inside columns: 115" / 2,921 mm. Front arm min reach: 25-1/2" / 648 mm. Front arm max reach: 49-1/2" / 1,257 mm. Rear arm min reach: 32-1/2" / 825 mm. Rear arm max reach: 52-1/2" / 1,333 mm...

$3,479.95
thegaragedealer.com
Top stores
thegaragedealer.com
$3,479.95
Tiger 2 Post Lifts - Tiger T-10AC-D 2 Post Lift - Tiger 2 Post Lifts for Cars & Trucks
Tiger 2 Post Lifts - Tiger T-10AC-D 2 Post Lift - Tiger 2 Post Lifts for Cars & Trucks

Capacity: 10,000 lbs ALI CERTIFIED. Column Height: 142". Width Overall: 137.5". Drive Through Clearance: 96". Lifting Height: 70.5" (Without truck adapters to top of pad). Lowered Height: 4". Lifting Height to top of pads (no adapters) 70.75". Lifting Height to top of pads (with adapters) 75.75". Height to safety cut off bar 137.5". Power Unit: 220V 30 Amp. Lifting Speed: 49.9 seconds (unloaded). Shipping weight: 1725 lbs.

$2,350.00
equiptool.com
Top stores
equiptool.com
$2,350.00
Bendpak XPR-12C 2 Post Vehicle Lift 12,000 lb. Capacity/Clearfloor/Triple-Telescope Arms-All Four
Bendpak XPR-12C 2 Post Vehicle Lift 12,000 lb. Capacity/Clearfloor/Triple-Telescope Arms-All Four

Lifting capacity: 12,000 lbs. / 5,443 kg. Max capacity / front axle: 6,000 lbs. / 2,722 kg. Max capacity / rear axle: 6,000 lbs. / 2,722 kg. Overall height: 170" / 4,318 mm. Overall width (outside of base plate): 155" / 3,937 mm. Width (outside of columns): 144" / 3,658 mm. Floor to overhead switch: 165” / 4,191 mm. Inside columns: 120" / 3,048 mm. Front arm min reach: 32" / 813 mm. Front arm max reach: 60" / 1,524 mm. Rear arm min reach: 32" / 813 mm. Rear arm max reach: 60" / 1,524 mm...

$5,899.95
thegaragedealer.com
Top stores
thegaragedealer.com
$5,899.95
Bendpak XPR-12C-192 2 Post Vehicle Lift 12,000 lb. Capacity/Clearfloor/Triple-Telescope Arms-All Four/192" Height
Bendpak XPR-12C-192 2 Post Vehicle Lift 12,000 lb. Capacity/Clearfloor/Triple-Telescope Arms-All Four/192" Height

Lifting capacity: 12,000 lbs. / 5,443 kg. Max capacity / front axle: 6,000 lbs. / 2,722 kg. Max capacity / rear axle: 6,000 lbs. / 2,722 kg. Overall height: 192". Overall width (outside of base plate): 155" / 3,937 mm. Width (outside of columns): 144" / 3,658 mm. Floor to overhead switch: 165” / 4,191 mm. Inside columns: 120" / 3,048 mm. Front arm min reach: 32" / 813 mm. Front arm max reach: 60" / 1,524 mm. Rear arm min reach: 32" / 813 mm. Rear arm max reach: 60" / 1,524 mm. Min pad...

$6,399.95
thegaragedealer.com
Top stores
thegaragedealer.com
$6,399.95
Bendpak XPR-15C-192 2 Post Vehicle Lift 15,000 lb. Capacity/Clearfloor/Standard Arms/192" Height
Bendpak XPR-15C-192 2 Post Vehicle Lift 15,000 lb. Capacity/Clearfloor/Standard Arms/192" Height

Lifting capacity: 15,000 lbs. / 6,804 kg. Max capacity / front axle: 7,500 lbs. / 3,402 kg. Max capacity / rear axle: 7,500 lbs. / 3,402 kg. Overall height: 192". Overall width (outside of base plate): 155" / 3,937 mm. Width (outside of columns): 144" / 3,658 mm. Floor to overhead switch: 165" / 4,191 mm. Inside columns: 120" / 3,048 mm. Front arm min reach: 39" / 991 mm. Front arm max reach: 60" / 1,524 mm. Rear arm min reach: 39" / 991 mm. Rear arm max reach: 60" / 1,524 mm. Min pad...

$8,629.95
thegaragedealer.com
Top stores
thegaragedealer.com
$8,629.95
Tiger 2 Post Lifts - Tiger T-11AC-D 2 Post Lift - Tiger 2 Post Lifts for Cars & Trucks
Tiger 2 Post Lifts - Tiger T-11AC-D 2 Post Lift - Tiger 2 Post Lifts for Cars & Trucks

Dual cylinder direct pull lifting. No chains or roller bearings to wear out. Single piece column. Continuous rolled steel column.No sheet metal. Extra long carriage (44"). Puts less stress on slider blocks. Padded cut-off bar. Automatic electric override. Two point lock release. Free hardware. Stackable truck adapters standard. Powder coat paint finish.

$2,075.00
equiptool.com
Top stores
equiptool.com
$2,075.00
Tiger 2 Post Lifts - Tiger T-9AC 2 Post Lift - Tiger 2 Post Lifts for Cars & Trucks
Tiger 2 Post Lifts - Tiger T-9AC 2 Post Lift - Tiger 2 Post Lifts for Cars & Trucks

Capacity 9,000 lbs. Lifting speed 50 seconds. Motor rating 2HP 220V 20A. Width overall 134". Height overall 142". Lifting height 70.5". Lifting height(with ext.) 75.5". low pad height 4.5". Width between columns 109". Drive thru 92". Shipping weight 1398 lbs.

$1,395.00
equiptool.com
Top stores
equiptool.com
$1,395.00
DYNA-LIFT 4M-D1C-20-H Hydc Lift Kt W/cstr,4 Post, Mnl,1500lb
DYNA-LIFT 4M-D1C-20-H Hydc Lift Kt W/cstr,4 Post, Mnl,1500lb

Hydraulic Lift Kit, Workbench Accessory, Adjustment Range 20 In., Load Rating 1500 Lb., Number Of Cylinders 4, Cylinder Material Aluminum, Tube Length 96 In.-96 In.-60 In.-60 In., Mounting Type Retro Fit, Screw Size 1/4 In. 20, Includes System Complete Less Hardware,caster

$1,704.00
grainger.com
Top stores
grainger.com
$1,704.00
BendPak XPR15C 15K 2 Post Clearfloor Lift with Standard Arms
BendPak XPR15C 15K 2 Post Clearfloor Lift with Standard Arms

BendPak XPR15C 15K 2 Post Clearfloor Lift with Standard Arms. Single piece columns. Dual hydraulic "Direct-Drive" cylinders. Electric/hydraulic power system. Large, oversize, 3/4" thick, A36 steel base plate. Single-point safety-lock release. Oversize 53" tall carriage for superior strength and durability. Width: 155". Extended height top-beam provides greater overhead clearance. Self-lubricating, dura-glide polyethylene bearing system. Safety locks in each column spaced every 3-inches...

$6,976.69
Eris Automotive Tools
Top stores
Eris Automotive Tools
$6,976.69
Master Series SC-2 Single Post Equipment Lift
Master Series SC-2 Single Post Equipment Lift

The Master Series SC-2 single post equipment and storage lift is designed to store or service equipment where floor space is at a premium. The single post SC-2 mounts to the floor, normally in the front part of a garage with the platform positioned over the hood of the vehicle.

$1,395.00
gregsmithequipment.com
Top stores
gregsmithequipment.com
$1,395.00
Dannmar Brigadier 10ACX 2 Post Lift
Dannmar Brigadier 10ACX 2 Post Lift

Lifting Capacity: 10,000 lbs. / 4546 kg. Style: Wide Asymmetric. Overall Height: 145" / 3683 mm. Overall Width (Outside of Base plates): 143 ½”. Overall Width (Outside of Columns): 136 ½”. Width Between Columns: 112 ¾”. Minimum Reach (Front Arm): 25" / 635 mm. Maximum Reach (Front Arm): 46" / 1168 mm. Minimum Reach (Rear Arm): 42" / 1067 mm. Maximum Reach (Rear Arm): 60" / 1524 mm. Minimum Pad Height: 4-1/2" / 114 mm. Rise: 69" / 1753 mm. Maximum Lifting Height (Pad Only): 73" / 1854...

$2,469.00
equiptool.com
Top stores
equiptool.com
$2,469.00
Dannmar Admiral 9000 2 Post Lift
Dannmar Admiral 9000 2 Post Lift

Lifting Capacity: 9,000 lbs. / 4091 kg. Overall Height: 113" / 2870 mm. Overall Width (Outside of Base plates): 132" / 3353 mm. Overall Width (Outside of Columns): 124" / 3150 mm. Floorplate Height: 2" / 51 mm. Width Between Columns: 105" / 2667 mm. Minimum Reach (Front Arm): 32" / 813 mm. Maximum Reach (Front Arm): 47" / 1194 mm. Minimum Reach (Rear Arm): 35" / 889 mm. Maximum Reach (Rear Arm): 52" / 1321 mm. Minimum Pad Height: 4" / 102 mm. Rise: 74" / 1880 mm. Maximum Lifting Height...

$2,379.00
equiptool.com
Top stores
equiptool.com
$2,379.00
Bendpak 2-Post Lift - 10,000-Lb. Capacity
Bendpak 2-Post Lift - 10,000-Lb. Capacity

This Bendpak 2-Post Lift delivers a fast lift speed and less maintenance for improved efficiency and productivity. Plus, the expandable top beam accommodates wide or narrow configurations. Lift...

$2,999.99
Northern Tool
Top stores
Northern Tool
$2,999.99
Mountain 5590 2 POST 10K AUTOMOTIVE LIFT BLUE
Mountain 5590 2 POST 10K AUTOMOTIVE LIFT BLUE

10K lifting capacity - ALI Certified Lift. 3-Stage front arms lift both Asymmetrically and Symmetrically within same service bay. Single point mechanical lock release. Padded overhead shut off bar with rubber door guard. Will now fit a 12' ceiling.

$3,627.68
Eris Automotive Tools
Top stores
Eris Automotive Tools
$3,627.68
DYNA-LIFT 4M-D1A-12-S Hydraulic Lift Kt,4 Post, Mnl,1000 Lb
DYNA-LIFT 4M-D1A-12-S Hydraulic Lift Kt,4 Post, Mnl,1000 Lb

Hydraulic Lift Kit, Workbench Accessory, Adjustment Range 12 In., Load Rating 1000 Lb., Number Of Cylinders 4, Cylinder Material Aluminum, Tube Length 96 In.-96 In.-60 In.-60 In., Mounting Type Retro Fit, Screw Size 1/4 In. 20, Includes System Complete Less Hardware

$846.00
grainger.com
Top stores
grainger.com
$846.00
Ammco 2 Post Lift - 7000 lb. Lifting Capacity (SOLD)
$1,650.00
affordableautomotiveequip.net
Top stores
affordableautomotiveequip.net
$1,650.00
Mountain 5590RU 2 POST 10K AUTOMOTIVE LIFT RED UNINSTALLED
Mountain 5590RU 2 POST 10K AUTOMOTIVE LIFT RED UNINSTALLED

10K lifting capacity - ALI Certified Lift. 3-Stage front arms lift both Asymmetrically and Symmetrically within same service bay. Single point mechanical lock release. Padded overhead shut off bar with rubber door guards. Will now fit in a 12' ceiling.

$3,598.00
Eris Automotive Tools
Top stores
Eris Automotive Tools
$3,598.00
BendPak 4 Post Bus & Truck Lifts - Heavy Duty Bend Pak HD-27 4 Post Truck Lift - 4 Post Lifts for Trucks
BendPak 4 Post Bus & Truck Lifts - Heavy Duty Bend Pak HD-27 4 Post Truck Lift - 4 Post Lifts for Trucks

27,000 pound lifting capacity. Runways include rail-kit for optional accessories. Electric / hydraulic power system. Single 5” diameter hydraulic cylinder mounted underneath runway. Internal "Anti-Sway" slider blocks in each column. Features heavy-duty aircraft cable. Oversized self-lubricating cable sheaves. Rugged 4” main sheave axles. Multi-position safety locks in each column. Multi-position, adjustable height safety locks in each column. Ramps feature non-skid surface. Push-button...

$12,660.00
equiptool.com
Top stores
equiptool.com
$12,660.00
BendPak Lifts - Bend Pak HD-27X 4 Post Lift - Bend Pak 4 Post Lifts for Cars & Trucks
BendPak Lifts - Bend Pak HD-27X 4 Post Lift - Bend Pak 4 Post Lifts for Cars & Trucks

Lifting Capacity: 27,000 lbs. / 12,247 Kg. Overall Width: 154" / 3912 mm. Outside Length: 317" / 8052 mm. Overall Length: 357" / 9068 mm. Height of Columns: 93” / 2362 mm. Min. Runway Height: 8-1/2” / 216 mm. Max. Rise: 60” / 1524 mm. Max. Lifting Height: 68-1/2” / 1740 mm. Width Between Columns: 134" / 3404 mm. Runway Width: 22" / 559 mm. Width Between Runways (*)38" - 56" / 965 mm. – 1422 mm. Length of Runways: 323" / 8204 mm. Locking Positions: 9. Lock Spacing: Every 6" / 152 mm....

$14,550.00
equiptool.com
Top stores
equiptool.com
$14,550.00
DYNA-LIFT 4M-D1D-20-H Hydraulic Lift Kt,4 Post, Mnl,1500 Lb
DYNA-LIFT 4M-D1D-20-H Hydraulic Lift Kt,4 Post, Mnl,1500 Lb

Hydraulic Lift Kit, Workbench Accessory, Adjustment Range 20 In., Load Rating 1500 Lb., Number Of Cylinders 4, Cylinder Material Aluminum, Tube Length 96 In.-96 In.-60 In.-60 In., Mounting Type Retro Fit, Screw Size 1/4 In. 20, Includes System Complete Less Hardware

$1,481.00
grainger.com
Top stores
grainger.com
$1,481.00
BendPak Super-Duty Lift - 2 Post, 18,000-Lb. Capacity
BendPak Super-Duty Lift - 2 Post, 18,000-Lb. Capacity

Designed for full-size truck service. Lift Capacity (lbs.): 18,000, Overall Height (in.): 170, Overall Width (in.): 155, Motor Phase(s): 60 Hz, Volts: 220 Single-point safety release Dual...

$7,999.99
Northern Tool
Top stores
Northern Tool
$7,999.99
DYNA-LIFT 4M-D1D-12-H Hydraulic Lift Kt,4 Post, Mnl,1500 Lb
DYNA-LIFT 4M-D1D-12-H Hydraulic Lift Kt,4 Post, Mnl,1500 Lb

Hydraulic Lift Kit, Workbench Accessory, Adjustment Range 12 In., Load Rating 1500 Lb., Number Of Cylinders 4, Cylinder Material Aluminum, Tube Length 96 In.-96 In.-60 In.-60 In., Mounting Type Retro Fit, Screw Size 1/4 In. 20, Includes System Complete Less Hardware

$1,400.00
grainger.com
Top stores
grainger.com
$1,400.00
2-Post Lift with Mechanical Lock
2-Post Lift with Mechanical Lock

CL10V3’s Versymmetric® offset 3-stage front arms and 3-stage rear arms provide the greatest overall arm sweep to meet the widest range of vehicle pickup points. 11’8” standard height allows lift to be placed in standard service bay with 12’ ceiling. Available 2’ and 3’ column extensions enable technician to work at an ergonomic height when servicing taller vehicles. Double telescoping screw pads adjust to multiple heights minimizing the need for adapters. 48” elongated carriage design decreases...

$4,943.99
mactools.com
Top stores
mactools.com
$4,943.99
DYNA-LIFT 4M-D1C-12-H Hydc Lift Kt W/cstr,4 Post, Mnl,1500lb
DYNA-LIFT 4M-D1C-12-H Hydc Lift Kt W/cstr,4 Post, Mnl,1500lb

Hydraulic Lift Kit, Workbench Accessory, Adjustment Range 12 In., Load Rating 1500 Lb., Number Of Cylinders 4, Cylinder Material Aluminum, Tube Length 96 In.-96 In.-60 In.-60 In., Mounting Type Retro Fit, Screw Size 1/4 In. 20, Includes System Complete Less Hardware,caster

$1,557.00
grainger.com
Top stores
grainger.com
$1,557.00
Tamco PD-2 Post Driver
Tamco PD-2 Post Driver

Use with small, portable air compressors (80-90psi). Only uses 2CFM at 90psi. Efficient for single or multiple post installations. Weight: 35 lbs. Air Assist Operation. One-man operation. Slight handle movement used to operate unit. Use air to lift the weight and pull down the handles to drive the post Safe Operation. No accidental cycling while off post. No pinch points. Ideal for T-posts and all metal posts up to 1-7/8" in diameter. No adapters or post clamp required.

$774.99
toolsteal.com
Top stores
toolsteal.com
$774.99