453 results for "2 finish nailer" between $25.00 and $400.00

Angled Finish Nailer Kit, Gauge 15, Fastener Range 1-1/4 To 2-1/2 Inches, Magazine Capacity 130, Air Flow Per Shot 0.04 Cfm, Maximum Pressure 70-120 Psi, Tool Weight 3.8 Pounds, Height 10 Inches, Length 14 11/16 Inches, Width 3 1/4 Inches

Lightweight and well balanced for easy operating Superior power with hardened one piece piston for professional application Adjustable knob for either sequential or contact firing Tool-free depth of drive adjustment for exact setting of nail head Teflon o-ring protects the piston from wear, Manufacturer: Ampro

The NT65GB 16-Gauge Finish Nailer allows the user to move easily around the jobsite without hoses or compressors! Features include dry fire lockout, low battery indicator, variable position hook, andtool-less jam release and depth of drive. The NT65GB drives nails from 1-1/4"" to 2-1/2"" in length and can be used for a variety of finish and trim applications including installation of door jambs, baseboard, chair rails, window casings and crown moulding.

16-gauge finish nailer w/integrated air duster. 3.7 lbs, lightweight & well balanced. Selective actuation w/ flip of switch. Easy to clear nose, tool-free depth adjusts. 360 degree fully adjustable exhaust. Fastener length capacity: 1" - 2-1/2". Operating pressure: 70 - 120 PSI. Top loading, 100 magazine capacity. Weight: 3.87 lb. UPC: 717709010420. Manufacturer Part No: NT65M2.

Quick release cam-lock opens nose assembly to clear jammed nails. Durable and lightweight die-cast housing for continuous use. "Tool-less" depth adjustments engineered for more precise flush and countersink nailing. Multi-directional exhaust port directs the exhaust air away from the operator. Built-in air filter minimizes dust and debris from entering tool. Non-marring rubber nose helps protect the wood's surface for a quality finish. Magazine holds 120 finish nails (1-1/4" to 2-1/2"). Easy...

Fasteners: 16-gauge. Nail Length: 1 - 2-1/2 Inches. Magazine Capacity: 100 (2 strip). Magazine Type: Rear Loading. Battery Type: Lithium-Ion. Voltage: 3.6V. Amp Hours: 1.5Ah. Battery Life: 2,000 drives. Charge Time: 1 hour. Fuel Cell Part Number: 728981. Fuel Cell Life: 1,200 drives. Feeder: Double-actioned. Firing Mode: Single action. Hook: Variable position. Jam Release: Tool-less. Depth of Drive: Tool-less. Dry Fire Lockout: Yes. No Mar Nose Cap: Yes. Charger w/ Wall & Car Adapters...

Uses standard 16 Ga. Finish nails from 3/4" to 2-1/2". Streamlined gun-body design for better hand holding position and fashion style. Sturdy aluminum extruded magazine with no insert nail guide. Internal piston catching mechanism at initial position. Tool-free nail depth control with detents. Tool-free jam release mechanism designed not to block line of sight. Tool-free adjustable exhaust. Non-marring nose tip with on toll storage. Includes: nailer, 1000 2" finish nails, oil, wrenches, ...

Adjustable depth of drive sinks nails to a consistent and controlled depth. Adjustable exhaust for user comfort.

The NT65A3 16 Gauge 2.5” Finish Nailer is used for finish-nailing of door casings, window casings, and similar frame assemblies, and for fastening of drawer bottoms and similar assembly work in the construction of various cabinets and cases.

Nail size: 15 gauge finish nails 1-1/4" - 2-1/2". Air inlet: 1/4" NPT ? Operating pressure: 60-100 PSI. Magazine capacity: 74 nails. Includes a 1/4" NPT male quick connect fitting, case, wrenches, safety goggles and oil. Weighs: 5 lbs.

Product Description The N62FNK-2 has adjustable nail-depth settings and an operating range of 70 to 120 PSI, which means you can dial in the right depth for the job quickly and easily. And with a driving power of 400 in/lbs, you can easily set 15-gauge finishing nails into even the most challenging hardwoods with power to spare. The magnesium construction of the N62FNK-2 Angled Finish Nailer means this tool is light enough to use all day, while still being strong enough to reliably use again and...

Powerful motor - drives 2-1/2" finish nail into solid oak. angled magazine - allows access in tight spots. rear loading magazine with by-pass pusher - for quick 3-step reloading. tool-free jam release. includes case oil 1000 nails eye protection 2 wrenches and 2 no mar pads.

Integrated air duster button allows air from the compressor to bypass the nailing function and expel from a hole in the front of the tool allowing the user to clear away dust and debris from the work surface in preparation for the nail

Porter Cable FN250AR 2-1/2-Inch 16-Gauge Finish Nailer (Factory Recon)

Internal piston catch for consistent max power on every shot. Tool-free depth-of-drive adjustment with detents for proper setting of nail heads. Drives 16 ga. "FN" style finish nails from 1" to 2-1/2" length. Tool-free jam release mechanism for easy nail removal. Tool-free adjustable exhaust channels contaminants away from the user. Magazine can be loaded as a rear load & lock style. Sequential style trigger with lock off switch. Removable non-marring nose tip. Contact safety located behind...

The NT65GSP9 16-Gauge Finish Nailer allows the user to move easily around the jobsite without hoses or compressors. Features include dry fire lockout, low battery indicator, variable position hook, and tool-less jam release and depth of drive. The NT65GSP9 drives nails from 1" to 2-1/2" in length and can be used for a variety of applications including installation of door jambs, baseboard, chair rails, window casings and crown molding.

Fasteners - 15-gauge, 34° angle. Nail Length- 1-1/4" - 2-1/2". Magazine Capacity- 100 (2 strip). Magazine Type- Rear Loading. Battery- Lithium Ion 3.6V, 1.5Ah. Battery Life- 2,000 drives. Fuel Cell Life- 1,200 drives. Feeder- Double-actioned. Firing Mode- Single action. Hook- Variable position. Jam Release- Tool-less. Depth of Drive- Tool-less. Dry Fire Lockout- Yes. No Mar Nose Cap- Yes. Charger w/ Wall & Car Adaptors- Yes. Length- 11-13/16". Width- 3-11/32". Height- 12-15/16"....

Maintenance-free motor designed to deliver long life. Internal piston catch for consistent max power on every shot. Tool-free depth-of-drive adjustment with detents for proper setting of nail heads. Drives 15 Ga. "DA" style angle finish nails from 1” to 2-1/2” length. Tool-free jam release mechanism for easy nail removal. Tool-free adjustable exhaust to keep contaminates away from the work. Magazine can be loaded as a rear load & lock style. Sequential style trigger with lock off switch. ...