5095 results for "2 channel amplifier" between $50.00 and $800.00

Max power output: 150 watts x 2 channel LED power and protection indicators Gain control Smart engage auto turn-on circuitry Built-in adaptive cooling fans

400 Watts x 2 Output 800 Watts x 1 Bridged Output Variable Hi/Lo Electronic Crossover Network Variable Bass Boost Variable Input Level (Gain) Control

This Marine Amplifier features Advanced Thermal Rollback Protection, so it automatically rolls back peak voltage under tough conditions to protect your amp while continuing to play at a safe level. This amp is compatible with almost any system thanks

Whether you're looking to drive high frequency component speakers or low frequency subwoofers, the Rockford Fosgate P400-2 has the power and flexibility you need to put some serious PUNCH in your vehicle. The power available from such a small amp means it's a great match for a 2-ohm DVC subwoofer or pair of 8-ohm SVC. With proven PUNCH technology, it will deliver real Rockford Fosgate power.

High Power 50W Maximum Power Amplifier - 5.1 Surround Sound Audio Speaker - Power Supple Voltage: 10.8V To 15.6V - Five (5) 3/4" FowardMount Full Range Audio Five (5) 3/4" Forward Mount Full Range Audio - Amplifier Specs: - Current Consumption: 3A - Two (2) 1" Rear Mount Mid-Bass Response Two (2) 1" Rear Mount Mid-Bass Response - Continuous Power Output: 25W - Dimensions: 1.75'' (H) X 3.5''(W) X 5.75'' (L) - Dimensions: 1.125'' (H) X 6.75''(W) X 6.5'' (L) Mounting Brackets Hardware Included - Peak...

Maximum Power Output 2 x 2000W - 2 Ohm Stable - Custom Terminal Block for Speaker Connection - S/N Ratio: >90dB Bridgeable RMS Power @ 4 Ohms: 1x4000W - MOSFET Power Supply - Thermal / Overload / Short Circuit Protection 2 Channel Bridgeable MOSFET Amplifier - PWM ( Pulse-Width-Modulation ) System - Input Impedance: 47K Ohms Frequency Response 20 Hz-50kHz (±3dB) - Glass Epoxy PCB - Soft Turn On/ Off Output Power @ 14.4v DC, 50Hz - Silver RCA Inputs - Advanced Protection Circuitry Dimensions:10....

Amplifiers: LA1110-SL(BK), LA1270-SL(BK)Bridgeable MOSFET Amplifier Tri-Mode Capable Heavy Duty Aluminum Alloy Heatsink Class A-B Operation Built-in Crossover The 2 CH and 4 CH amplifiers are feature a continuously variable low pass and fixed high pass crossover.

2 x 1200W rms at 4 ohms 2400W max at 4 ohms bridged Dual switchable bass boost Dual variable electronic crossover network Tri-mode capable

Maximum Power Output 2 x 2500W - 2 Ohm Stable - Custom Terminal Block for Speaker Connection - S/N Ratio: >90dB Bridgeable RMS Power @ 4 Ohms: 1 x 5000 W - MOSFET Power Supply - Thermal / Overload / Short Circuit Protection - Dimensions:10.24''W x 2.21''H x 18.90''L 2 Channel Bridgeable MOSFET Amplifier - PWM ( Pulse-Width-Modulation ) System - Input Impedance: 47K Ohms Frequency Response 20 Hz-50kHz (±3dB) - Glass Epoxy PCB - Soft Turn On/ Off Output Power @ 14.4v DC, 50Hz - Silver RCA Inputs -...

2- Channel Dual Source Amplifier 80 watts per channel into 8 ohms or 125 watts into 4 ohms,250 watts when bridged into a single 8-ohm load,primary and secondary audio line inputs with automatic source switching

Super high fidelity sound. 2 Channel bridgeable amplifier. Wire bass remote w/ LED. Built-in full crossover. Variable low pass filter (LPF) 30Hz - 250Hz. Variable high pass filter (HPF) 50Hz - 1KHz. Variable bass boost (0 - 18dB). Variable gain control. 2 - 8 ohm load capability. MOFSET regulated power supply (PWM). 3-way protection with LEF indicator. Frequency response 20Hz - 30KHz. Less than 0.03% THD. High / low impedance input. 45° power & speaker connector. gold plated RCA, power...

The rear panel features balanced XLR and 1/4" phone inputs, as well as unbalanced RCA phono inputs for complete compatibility with professional and consumer audio gear.

50 watts x 2 RMS at 4 ohms. 75 watts x 2 RMS at 2 ohms. 150 watts RMS at 2 ohms, bridged. 400 watts dynamic power. Stereo-bridged simultaneous operation. Low-level RCA type inputs. Variable low-pass crossover. PWM MOSFET power supply.

Fully discrete stereo amplifier. 75watts RMS per channel into 8 ohms, both channels driven. 100 watts RMS per channel into 4 ohms, both channels driven. Designed to drive multiple pairs of speakers connected in parallel. Stable into low impedance loads (2.66 ohms). Three turn-on modes: music sense, voltage trigger and manual. 5-way binding posts. 12-volt control out. Voltage trigger input accepts 3-30V AC/DC. Removable 2-wire line cord. Left and right channel installer adjustable level...

140 watts (into 8 ohms) x 2 ch amps. All discrete "current feedback" amplifier stages. Marantz original 15,000 µF/ 71 Vx2 block condensers. LAPT high-efficiency output transistors. Large speaker binding posts designed for high quality speaker wire. Massive power transformer for high current. Single ended and balanced inputs. Newly designed clean front panel with porthole display. Detachable power cord. Direct IR flasher input and DC trigger in/out. D-BUS (RC-5 In/Out) remote connection...

Fusion FM-402 2 Channel Amplifier add more power to your marine speakers by connecting a FUSION Marine Amplifier to your audio system, or install with a subwoofer to increase the bass level of your music.

4/3/2 Channel Operation. High Temperature Protection. Overcurrent Protection. Subsonic Filter. Bass EQ Circuit. Adjustable Crossover (HP/LP). MOSFET Power Supply. DC-DC PWM Power Supply. Discrete Pre-Amp Stage. STAR Circuitry. Auto Over-Current Protection. MultiMode™. Top Mounted Blue LED Power/Status Indicator. Input Channel Selector. Gold Plated RCA Input Connectors. Continuously Adjustable Gain Control. Speaker Level Inputs. Gold Plated Power Screw Terminals. Gold Plated Speaker...

All terminator models incorporate a high sheen, gloss black cover that adds a powerful feel to any installation. All three models share the same size and footprint and all the connections are on one side making it easy to create a custom looking, clean installation. Rather than weighing you down with heavy aluminum heat sinks, Terminator amplifiers are cooled using a variable speed internal fan that is normally reserved for our highest end amplifier lines. As you turn your volume knob clockwise...