|
CLEVELAND C55152 1-8nc 1002tn 4fl H4 Plug Hand Tap-tin
Hand Tap, Plug, Hss, Size 1, Finish Tin Coated, Flutes 4, General Purpose, Pitch 8, Thread Type Unc, Thread Length 2-1/2 In., Thread Length 63.500 Mm, Overall Length 5-1/8 In., Overall Length 130.175 Mm, Pitch Diameter Limits H4, Shank Dia. 0.800, Standards Uscti 302, List Number 1002tn, For Alloy Steel, Carbon Steel, Free-machining Stainless And Aluminum 
|
$116.95
grainger.com
|
Top stores
grainger.com
$116.95
|
|
Gold Medal 2182ER 2 in 1 Combo Kandy King, Caramel Corn/Frosted Nuts, Right Hand Dump, 230 V
Thank you so much for the GREAT service!!! The grill, (261-L410) which I ordered from you, arrived today; this was much, much sooner than I had expected.
|
$2,579.50
|
Top stores
KaTom Restaurant Supply
$2,579.50
|
|
CLEVELAND C55154 1-12nf 1002tn 4fl H4 Plug Hand Tap-tin
Hand Tap, Plug, Hss, Size 1, Finish Tin Coated, Flutes 4, General Purpose, Pitch 12, Thread Type Unf, Thread Length 2-1/2 In., Thread Length 63.500 Mm, Overall Length 5-1/8 In., Overall Length 130.175 Mm, Pitch Diameter Limits H4, Shank Dia. 0.800, Standards Uscti 302, List Number 1002tn, For Alloy Steel, Carbon Steel, Free-machining Stainless And Aluminum
|
$120.85
grainger.com
|
Top stores
grainger.com
$120.85
|
|
CLEVELAND C55252 1-8nc 1003tn 4fl H4 Botm Hand Tap-tin
Hand Tap, Bottoming, Hss, Size 1, Finish Tin Coated, Flutes 4, General Purpose, Pitch 8, Thread Type Unc, Thread Length 2-1/2 In., Thread Length 63.500 Mm, Overall Length 5-1/8 In., Overall Length 130.175 Mm, Pitch Diameter Limits H4, Shank Dia. 0.800, Standards Uscti 302, List Number 1003tn, For Alloy Steel, Carbon Steel, Free-machining Stainless And Aluminum
|
$116.95
grainger.com
|
Top stores
grainger.com
$116.95
|
|
CRL 2-1/2" Stainless Steel Square Connector Sleeve for Square Cap Railing, Square Cap Rail Corner, and Hand Railing by CR Laurence
Formed, Shaped to Fit 2-1/2" (63.5 mm) Square Railing and Ready to Install Provide Proper Alignment Between Railing Splices This CRL Square Connector Sleeve is used to connect and provide proper alignment between square railing splices and square railing to corner splices. The 5 inch (127 millimeter) long Connector Sleeves must be compressed to fit inside the Square Cap Railing. Use of our 32629 Metal Contact Cement greatly improves the joint strength.Important NotesIMPORTANT INSTALLATION NOTE: Always...
|
$28.84
|
Top stores
dkhardware.com
$28.84
|
|
Mfg# 2034HS-R-1 - 2-3/4" Right Hand - Stainless
These hinges resemble the Fast-Pin Butt Hinges but still give you the convenience of a "Lift Off" hinge. They are designed for those installations where removal of a cabinet door is required while maintaining a consistent appearance with other hinges in the cabin.
|
$16.76
downwindmarine.com
|
Top stores
downwindmarine.com
$16.76
|
|
steam fast steamer floor and hand held 2 in 1 SF292
1300 - watt steamer with array of accessories cleans and sanitizes. Converts from upright steam mop to handhelf steam cleaner to fabric steamer. Removes mold, mildew, stains , grease , grime, and odors. Heats up in 30 sec. 10 - oz continuous - fill water tank. Variable steam control.
|
$82.39
|
Top stores
Emer USA
$82.39
|
|
Proto J5568 2-1/8" 12-Point Standard Length Hand Socket 3/4" Drive
Weight 2.72 lbs. Bolt Clearance Depth (E) 2-5/32. Drive End Outside Diameter (C) 2-3/32. Drive Type 3/4 In. Nut End Hex Depth (D) 1-13/16. Nut End Outside Diameter (B) 2-61/64. Socket Length (L) 3-9/32. Socket Size 2-1/8. Socket Type 12 POINT. Specifications Fed'l Specs.: GGG-W-641E. ANSI Spec.: B107.1.
|
$50.55
fishertools.com
|
Top stores
fishertools.com
$50.55
|
|
Interstate 1-3/8-6 HSS 4Fl H4 Bottoming HSS Hand Tap
Click to Enlarge Click to Enlarge Interstate 1-3/8-6 HSS 4Fl H4 Bottoming HSS Hand Tap Thread Size (Inch) 1-3/8 - 6 Thread Limit H4 Number of Flutes 4 Chamfer Bottoming Material High Speed Steel Finish/Coating Bright Thread Direction Right Hand Oversize (Yes/No) No Through Coolant (Yes/No) No Thread Standard UNC Overall Length (Inch) 6-1/16 Thread Length (Inch) 3 MSRP: $129.99 You are buying one Interstate HSS Hand Tap. Item seems to be unused surplus in casing...
|
$63.43
industryrecycles.com
|
Top stores
industryrecycles.com
$63.43
|
|
Irwin Tool 30508 1/8" Left-Hand Mechanics Length Cobalt High Speed Steel Drill Bits
Constructed of M-42 8 percent cobalt high speed steel for super abrasive resistance in tough metals Heavy duty spiral flute design produces faster chip ejection Shorter cutting lips reduce torque for drilling in high tensile strength materials. 135-degree split point reduces feed pressure for easier penetration without work hardening Ideal for use with screw extractors
|
$17.56
acetoolonline.com
|
Top stores
acetoolonline.com
$17.56
|
|
Stanley Proto J5444H 1/2" Drive 1-3/8" 6-Point Standard Length Hand Socket
Stanley Proto J5444H 1/2" Drive 1-3/8" 6-Point Standard Length Hand SocketProfessionals worldwide prefer Stanley Proto Industrial Tools for their outstanding quality, durability, and dependability. Professionals for heavy-duty industrial applications, including auto-manufacturing plants, steel and airplane manufacturing, chemical plants, refineries, general manufacturing, transportation, and fleet maintenance for trucking, transit, and aircraft use Proto Industrial Tools. With a global distribution...
|
$29.46
highqualityhandtools.com
|
Top stores
highqualityhandtools.com
$29.46
|
|
Boosey & Hawkes - Piano Concerto No. 2 in G Minor, Op. 16 - Two Pianos, Four Hands
No Sales Tax outside Florida.
|
$24.76
compumusic.com
|
Top stores
compumusic.com
$24.76
|
|
Proto J5016H 1/2" 6-Point Deep Length Hand Socket 3/8" Drive
Weight 0.1 lbs. Bolt Clearance Depth (E) 1-11/16. Drive End Outside Diameter (C) 23/32. Drive Type 3/8 In. Nut End Hex Depth (D) 33/64. Nut End Outside Diameter (B) 23/32. Socket Length (L) 2-1/64. Socket Size 1/2. Socket Type 6 POINT. Specifications Fed'l Specs.: GGG-W-641E. ANSI Spec.: B107.1.
|
$7.05
fishertools.com
|
Top stores
fishertools.com
$7.05
|
|
Champion 302-1-8 Carbon Steel Hand Bottoming Taps No. 1-8
For hand tapping in maintenance and repair work and for re-threading applications where extreme thread accuracy and tolerance is not critical.
|
$12.60
fishertools.com
|
Top stores
fishertools.com
$12.60
|
|
WESTWARD 10N638 C.steel Left Hand Die,2in,5/8in,11pitch
Round Adjustable Die, Material Carbon Steel, Thread Direction Left Hand, Size 5/8 In, Pitch 11, Thread Type Nc, Outside Dia. 2 In, Thickness 5/8 In, Application Used For Hand Threading
|
$16.80
grainger.com
|
Top stores
grainger.com
$16.80
|
|
Proto J5475 1/2" 12-Point Universal Hand Socket 1/2" Drive
Weight 0.23 lbs. Bolt Clearance Depth (E) 29/64. Drive End Outside Diameter (C) 15/16. Drive Type 1/2 In. Nut End Hex Depth (D) 5/16. Nut End Outside Diameter (B) 43/64. Socket Length (L) 2-3/16. Socket Size 1/2. Socket Type 12 POINT. Specifications ANSI Spec.: B107.1.
|
$26.35
fishertools.com
|
Top stores
fishertools.com
$26.35
|
|
Proto J5556 1-3/4" 12-Point Standard Length Hand Socket 3/4" Drive
Weight 1.79 lbs. Bolt Clearance Depth (E) 1-3/4. Drive End Outside Diameter (C) 1-3/4. Drive Type 3/4 In. Nut End Hex Depth (D) 1-15/32. Nut End Outside Diameter (B) 2-3/8. Socket Length (L) 2-3/4. Socket Size 1-3/4. Socket Type 12 POINT. Specifications Fed'l Specs.: GGG-W-641E. ANSI Spec.: B107.1.
|
$31.05
fishertools.com
|
Top stores
fishertools.com
$31.05
|
|
Proto J5548 1-1/2" 12-Point Standard Length Hand Socket 3/4" Drive
Weight 1.42 lbs. Bolt Clearance Depth (E) 1-15/32. Drive End Outside Diameter (C) 1-5/8. Drive Type 3/4 In. Nut End Hex Depth (D) 1-1/4. Nut End Outside Diameter (B) 2-3/64. Socket Length (L) 2-13/32. Socket Size 1-1/2. Socket Type 12 POINT. Specifications Fed'l Specs.: GGG-W-641E. ANSI Spec.: B107.1.
|
$24.75
fishertools.com
|
Top stores
fishertools.com
$24.75
|
|
Proto J5016 1/2" 12-Point Deep Length Hand Socket 3/8" Drive
Weight 0.1 lbs. Bolt Clearance Depth (E) 1-11/16. Drive End Outside Diameter (C) 23/32. Drive Type 3/8 In. Nut End Hex Depth (D) 33/64. Nut End Outside Diameter (B) 23/32. Socket Length (L) 2-1/8. Socket Size 1/2. Socket Type 12 POINT. Specifications Fed'l Specs.: GGG-W-641E. ANSI Spec.: B107.1.
|
$6.95
fishertools.com
|
Top stores
fishertools.com
$6.95
|
|
Proto J5444 1-3/8" 12-Point Standard Length Hand Socket 1/2" Drive
Weight 0.79 lbs. Bolt Clearance Depth (E) 1-3/8. Drive End Outside Diameter (C) 1-5/8. Drive Type 1/2 In. Nut End Hex Depth (D) 25/32. Nut End Outside Diameter (B) 1-51/64. Socket Length (L) 2. Socket Size 1-3/8. Socket Type 12 POINT.
|
$18.35
fishertools.com
|
Top stores
fishertools.com
$18.35
|
|
Proto J5446 1-7/16" 12-Point Standard Length Hand Socket 1/2" Drive
Weight 0.98 lbs. Bolt Clearance Depth (E) 1-29/64. Drive End Outside Diameter (C) 1-5/8. Drive Type 1/2 In. Nut End Hex Depth (D) 27/32. Nut End Outside Diameter (B) 1-59/64. Socket Length (L) 2-1/8. Socket Size 1-7/16. Socket Type 12 POINT.
|
$20.70
fishertools.com
|
Top stores
fishertools.com
$20.70
|
|
Proto J5534 1-1/16" 12-Point Standard Length Hand Socket 3/4" Drive
Weight 0.6 lbs. Bolt Clearance Depth (E) 1-3/32. Drive End Outside Diameter (C) 1-37/64. Drive Type 3/4 In. Nut End Hex Depth (D) 3/4. Nut End Outside Diameter (B) 1-37/64. Socket Length (L) 2. Socket Size 1-1/16. Socket Type 12 POINT. Specifications Fed'l Specs.: GGG-W-641E. ANSI Spec.: B107.1.
|
$16.65
fishertools.com
|
Top stores
fishertools.com
$16.65
|
|
Proto J5536 1-1/8" 12-Point Standard Length Hand Socket 3/4" Drive
Weight 0.63 lbs. Bolt Clearance Depth (E) 1-9/32. Drive End Outside Diameter (C) 1-15/32. Drive Type 3/4 In. Nut End Hex Depth (D) 1. Nut End Outside Diameter (B) 1-37/64. Socket Length (L) 2-7/32. Socket Size 1-1/8. Socket Type 12 POINT. Specifications Fed'l Specs.: GGG-W-641E. ANSI Spec.: B107.1.
|
$16.80
fishertools.com
|
Top stores
fishertools.com
$16.80
|
|
Proto J5538 1-3/16" 12-Point Standard Length Hand Socket 3/4" Drive
Weight 0.75 lbs. Bolt Clearance Depth (E) 1-9/32. Drive End Outside Diameter (C) 1-15/32. Drive Type 3/4 In. Nut End Hex Depth (D) 1. Nut End Outside Diameter (B) 1-37/64. Socket Length (L) 2-7/32. Socket Size 1-3/16. Socket Type 12 POINT. Specifications Fed'l Specs.: GGG-W-641E. ANSI Spec.: B107.1.
|
$16.95
fishertools.com
|
Top stores
fishertools.com
$16.95
|
|
Proto J5540 1-1/4" 12-Point Standard Length Hand Socket 3/4" Drive
Weight 0.86 lbs. Bolt Clearance Depth (E) 1-9/32. Drive End Outside Diameter (C) 1-19/32. Drive Type 3/4 In. Nut End Hex Depth (D) 1-5/32. Nut End Outside Diameter (B) 1-13/16. Socket Length (L) 2-15/64. Socket Size 1-1/4. Socket Type 12 POINT. Specifications Fed'l Specs.: GGG-W-641E. ANSI Spec.: B107.1.
|
$17.95
fishertools.com
|
Top stores
fishertools.com
$17.95
|
|
Proto J5544 1-3/8" 12-Point Standard Length Hand Socket 3/4" Drive
Weight 1.1 lbs. Bolt Clearance Depth (E) 1-11/32. Drive End Outside Diameter (C) 1-5/8. Drive Type 3/4 In. Nut End Hex Depth (D) 1-5/32. Nut End Outside Diameter (B) 1-7/8. Socket Length (L) 2-9/32. Socket Size 1-3/8. Socket Type 12 POINT. Specifications Fed'l Specs.: GGG-W-641E. ANSI Spec.: B107.1.
|
$22.15
fishertools.com
|
Top stores
fishertools.com
$22.15
|
|
Proto J5546 1-7/16" 12-Point Standard Length Hand Socket 3/4" Drive
Weight 1.14 lbs. Bolt Clearance Depth (E) 1-15/32. Drive End Outside Diameter (C) 1-5/8. Drive Type 3/4 In. Nut End Hex Depth (D) 1-1/4. Nut End Outside Diameter (B) 2-3/64. Socket Length (L) 2-13/32. Socket Size 1-7/16. Socket Type 12 POINT. Specifications Fed'l Specs.: GGG-W-641E. ANSI Spec.: B107.1.
|
$23.35
fishertools.com
|
Top stores
fishertools.com
$23.35
|
|
Proto J5550 1-9/16" 12-Point Standard Length Hand Socket 3/4" Drive
Weight 1.46 lbs. Bolt Clearance Depth (E) 1-5/8. Drive End Outside Diameter (C) 1-23/32. Drive Type 3/4 In. Nut End Hex Depth (D) 1-5/16. Nut End Outside Diameter (B) 2-3/16. Socket Length (L) 2-5/8. Socket Size 1-9/16. Socket Type 12 POINT. Specifications Fed'l Specs.: GGG-W-641E. ANSI Spec.: B107.1.
|
$27.80
fishertools.com
|
Top stores
fishertools.com
$27.80
|
|
Proto J5552 1-5/8" 12-Point Standard Length Hand Socket 3/4" Drive
Weight 1.5 lbs. Bolt Clearance Depth (E) 1-5/8. Drive End Outside Diameter (C) 1-3/4. Drive Type 3/4 In. Nut End Hex Depth (D) 1-5/16. Nut End Outside Diameter (B) 2-15/64. Socket Length (L) 2-5/8. Socket Size 1-5/8. Socket Type 12 POINT. Specifications Fed'l Specs.: GGG-W-641E. ANSI Spec.: B107.1.
|
$28.95
fishertools.com
|
Top stores
fishertools.com
$28.95
|
|
Proto J5554 1-11/16" 12-Point Standard Length Hand Socket 3/4" Drive
Weight 1.58 lbs. Bolt Clearance Depth (E) 1-3/4. Drive End Outside Diameter (C) 1-3/4. Drive Type 3/4 In. Nut End Hex Depth (D) 1-15/32. Nut End Outside Diameter (B) 2-3/8. Socket Length (L) 2-3/4. Socket Size 1-11/16. Socket Type 12 POINT. Specifications Fed'l Specs.: GGG-W-641E. ANSI Spec.: B107.1.
|
$30.75
fishertools.com
|
Top stores
fishertools.com
$30.75
|
|
Proto J5558 1-13/16" 12-Point Standard Length Hand Socket 3/4" Drive
Weight 1.81 lbs. Bolt Clearance Depth (E) 1-15/16. Drive End Outside Diameter (C) 1-3/4. Drive Type 3/4 In. Nut End Hex Depth (D) 1-15/32. Nut End Outside Diameter (B) 2-9/16. Socket Length (L) 2-29/32. Socket Size 1-13/16. Socket Type 12 POINT. Specifications Fed'l Specs.: GGG-W-641E. ANSI Spec.: B107.1.
|
$33.75
fishertools.com
|
Top stores
fishertools.com
$33.75
|
|
Proto J5560 1-7/8" 12-Point Standard Length Hand Socket 3/4" Drive
Weight 2.27 lbs. Bolt Clearance Depth (E) 1-15/16. Drive End Outside Diameter (C) 1-3/4. Drive Type 3/4 In. Nut End Hex Depth (D) 1-5/8. Nut End Outside Diameter (B) 2-9/16. Socket Length (L) 2-31/32. Socket Size 1-7/8. Socket Type 12 POINT. Specifications Fed'l Specs.: GGG-W-641E. ANSI Spec.: B107.1.
|
$37.55
fishertools.com
|
Top stores
fishertools.com
$37.55
|
|
Malco Nosepiece for 2 in 1 Hand Riveter 5/32in. - ER46
|
$5.99
magnumtools.com
|
Top stores
magnumtools.com
$5.99
|
|
2 in 1: (Universal Black Stereo Headset Hands-free with
Details: 2 in 1: (Universal Black Stereo Headset Hands-free with 3.5mm Plug + 3.5mm to 2.5mm Audio Adapter) for Nokia 6120, 6121, 6165i, 6210, 6215, 6220, 6263, 6265i, 6275i, 6290, 6300, 6301, 6500, 6555, 6600, 6650, 6790(Surge), 7500(Prism), 7610(SuperNova), E51, E61, E62, E66, E71, E71x, E90+ Free Stars stripes Silicone WristBand
|
$9.95
cellphonebot.com
|
Top stores
cellphonebot.com
$9.95
|
|
|
Mfg# 2034HS-L-1 - 2-3/4" Left Hand - Stainless
These hinges resemble the Fast-Pin Butt Hinges but still give you the convenience of a "Lift Off" hinge. They are designed for those installations where removal of a cabinet door is required while maintaining a consistent appearance with other hinges in the cabin.
|
$16.76
downwindmarine.com
|
Top stores
downwindmarine.com
$16.76
|
