|
Champion Cutting Tool CM-MPB-1/4 Proline Carbide Tipped Multi-Purpose Bit
Carbide tipped Unique geometry Made in Germany Multi-purpose cutting action Bore through many different materials, Manufacturer: Champion Cutting Tool 
|
$7.15
|
Top stores
Amazon.com
$7.15
|
|
1-1/4" Carbide Tipped Forstner Bit
With Carbide Tips, these bits easily cut through Corian, Avonite and other solid surface materials, and they stay sharp longer in hard materials like maple due to their super sharp carbide. Not recommended for soft materials like pine or poplar, however - use standard Forstner bits. Made in Italy.
|
$38.05
McFeely's
|
Top stores
McFeely's
$38.05
|
|
Vermont American 23102 1/4-by-5/8-Inch Carbide Tipped Straight Router Bit, 1-Flute 1/4-Inch Shank
Razor sharp cutting edge diamond honed for smooth cuts Triple tempered shank for maximum durability Industrial micrograin carbide for smooth cut For routing where high production feed rates are essential. Single flute, Weight: 0.1 lbs., Manufacturer: Vermont American
|
$14.02
|
Top stores
Amazon.com
$14.02
|
|
Freud Tools 11-136 1/4 "Carbide Tipped Single Flute Straight Bit Shank
Freud 11-136 Carbide Tipped Single Flute Straight Bit Specification: Item No.: 11-136 (D) Overall Diameter: 1/4" (h) Carbide Height: 1/2" (A) Shank Diameter: 1/2" (H) Overall Length: 2-1/2" Application: General stock removal at fast feed rates. This single flute Freud bit was designed for high production work with maximum chip clearance for fast feed rates. Cuts all composite materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted...
|
$19.40
circlesaw.com
|
Top stores
circlesaw.com
$19.40
|
|
Tru-Cut PC1750 1-3/4 Taper Fit One-Piece Carbide Tipped Percussion Core Bits
Thickwall core bits Cost effective way for heavy duty drilling of large holes Taper shank fit Shank and core drill permanently become one-Piece during use Uses a Hex starter bit, Manufacturer: Tru-Cut
|
$69.57
|
Top stores
Amazon.com
$69.57
|
|
Tru-Cut PCT1750 1-3/4 Thin Wall Carbide Tipped Percussion Core Bits
Masonry core drills Excellent for lighter material Sizes range from 1-1/2-Inch to 4-Inch For use with SDS rotary hammer drills Ideal for large hole drilling where the depth is relatively shallow, Manufacturer: Tru-Cut
|
$66.01
|
Top stores
Amazon.com
$66.01
|
|
Freud Tools 12-194 1-3/4 "Carbide Tipped Double Flute Straight Bit
Freud 12-194 Carbide Tipped Double Flute Straight Bit Specification: Item No.: 12-194 (D) Overall Diameter: 1-3/4" (h) Carbide Height: 1-1/4" (A) Shank Diameter: 1/2" (H) Overall Length: 3" Application: General stock removal with a smooth finish. Freud straight bit cuts smoother than other bits because of the precise shear and hook angles - End of bit relief allows for fast plunging. Cuts all composite materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well...
|
$60.47
circlesaw.com
|
Top stores
circlesaw.com
$60.47
|
|
Freud Tools 16-108 1-1/4 "Carbide Tipped Mortising Bit, 1/2" Shank. Ideal For Hinges, Mortises and Dadoes
Description Freud 16-108 Carbide Tipped Mortising Bit Specification: Item No.: 16-108 (D) Overall Diameter: 1-1/4" (h) Carbide Height: 1/2" (A) Shank Diameter: 1/2" (H) Overall Length: 2-3/8" Application: Down shear works to eliminate splintering which is ideeal for hinges, mortises and dadoes. Freud's mortising bit is designed with deep center gullets for maximum material removal without chip loading. Cuts all composite materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic...
|
$28.97
circlesaw.com
|
Top stores
circlesaw.com
$28.97
|
|
Freud Tools 16-106 1-1/4 "Carbide Tipped Mortising Bit, 1/4" Shank. Ideal For Hinges, Mortises and Dadoes
Freud 16-106 Carbide Tipped Mortising Bit Specification: Item No.: 16-106 (D) Overall Diameter: 1-1/4" (h) Carbide Height: 29/64" (A) Shank Diameter: 1/4" (H) Overall Length: 2-1/8" Application: Down shear works to eliminate splintering which is ideeal for hinges, mortises and dadoes. Freud's mortising bit is designed with deep center gullets for maximum material removal without chip loading. Cuts all composite materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers...
|
$28.97
circlesaw.com
|
Top stores
circlesaw.com
$28.97
|
|
Freud FC-009 1-1/4-Inch by 3/8-Inch Shank Carbide Forstner Drill Bit
Drill flat bottomed holes without splintering Drill straight, angled and overlapping holes Thick micrograin carbide tips Right hand rotation Covered by Freud's limited lifetime warranty, Manufacturer: Freud
|
$26.23
|
Top stores
Amazon.com
$26.23
|
|
Freud FC-001-1/4-Inch by 5/32-Inch Shank Carbide Forstner Drill Bit
Drill flat bottomed holes without splintering Drill straight, angled and overlapping holes Thick micrograin carbide tips Right hand rotation Covered by Freud's limited lifetime warranty, Manufacturer: Freud
|
$15.65
|
Top stores
Amazon.com
$15.65
|
|
Freud 1657L 1/4-Inch by 57-Millimeter Left 10-Millimeter Shank Carbide Tipped Spindle Boring Machine Bit
Thick micrograin carbide tips Left hand rotation High production industrial grade Precision machined for best results Covered by Freud's limited lifetime warranty, Manufacturer: Freud
|
$19.84
|
Top stores
Amazon.com
$19.84
|
|
MAGBIT 781.12.0416 MAG 781 1/4-Inch by 12-Inch Carbide Tipped Bellhanger Drill Bit
Carbide tipped steel Cuts masonry, brick, concrete block Carbide tip cuts fast Fish eye hole provided near tip of flutes to aid in pulling wire compact bit fits tight spaces, Manufacturer: Magnus Industries Inc.
|
$9.23
|
Top stores
Amazon.com
$9.23
|
|
Bosch 85250M 1/4-Inch Diameter 7/8-Inch Cut 1/4-Inch Shank Carbide Tipped Double Flute Straight Bit
Recommended for use with a routing table All bits must be inserted in the full length of the collet. Be sure to use only router bits and accessories specifically designed for your router, Weight: 0.0 lbs., Manufacturer: Bosch
|
$14.02
|
Top stores
Amazon.com
$14.02
|
|
Freud 1657R 1/4-Inch by 57-Millimeter Right 10-Millimeter Shank Carbide Tipped Spindle Boring Machine Bit
Thick micrograin carbide tips Right hand rotation High production industrial grade Precision machined for best results Covered by Freud's limited lifetime warranty, Manufacturer: Freud
|
$19.82
|
Top stores
Amazon.com
$19.82
|
|
Klein Tools 53175 1/4-Inch Regular Spiral Carbide-Tipped Masonry Drill Bit
Drills through hard materials such as brick, concrete, plaster, and tile Black-oxide finish reduces chip welding Nominal Bit Size: 1/4-Inch; Overall Length: 4-Inch; Shank Diameter: 1/4-Inch Weight: 0.05-Pound, Manufacturer: Klein - Geneva Supply
|
$9.67
|
Top stores
Amazon.com
$9.67
|
|
Freud 06134 1-3/4-Inch by 6-Inch Right 1/2-Inch Shank Carbide Tipped Spindle Boring Machine Bit
Freud micrograin carbide for long life Shear angle design produces superior finish Designed for accurate boring Wing and spur cutters prevent bottom side tear out For use in boring machines and drill presses only, Manufacturer: Freud
|
$60.44
|
Top stores
Amazon.com
$60.44
|
|
Freud FC-013 1-3/4-Inch by 3/8-Inch Shank Carbide Forstner Drill Bit
Drill flat bottomed holes without splintering Drill straight, angled and overlapping holes Thick micrograin carbide tips Right hand rotation Covered by Freud's limited lifetime warranty, Manufacturer: Freud
|
$42.23
|
Top stores
Amazon.com
$42.23
|
|
|
Hitachi 971878 1/4-Inch by 1/4-Inch Tungsten Carbide Tipped Straight Bit for the Hitachi M8V Plunge Router
Well-built with a simple design Tungsten carbide tip is stronger than normal metal Designed for electronic routing projects Compatible with the Hitachi M8V Plunge Router Comes with a 30-day limited warranty, Manufacturer: Hitachi
|
$29.53
|
Top stores
Amazon.com
$29.53
|
|
Bosch 85256M 4-1/2" Carbide Tipped Single Flute Straight Bit
Bosch 85256M 4-1/2" Carbide Tipped Single Flute Straight BitMicrograin bits cut fast for mortises when work is started at the edge and provide a smooth finish cut that is ideal for surfacing operations.Bosch 85256M 4-1/2" Carbide Tipped Single Flute Straight Bit Specifications:• (A.) Overall Diameter: 1/2"• (B.) Cutting Edge Length: 1-1/2"• (C.) Shank Diameter: 1/2"• (D.) Overall Length: 4-1/2"*Image shown may vary by color, finish, or material
|
$17.26
|
Top stores
PlumberSurplus.com
$17.26
|
|
Bosch HC2041 1/4-inch x 6-inch Carbide Tipped S4L SDS-Plus Bit
The Bosch HC2041 1/4-inch x 6-inch Carbide Tipped S4L SDS-Plus Bit uses a patent-pending 4-flute design which provides fast dust removal. The carbide-tipped head of the Bosch HC2041 is harder, tougher and more resistant to extreme binding. Features: Optimized flute design to reduce stress allowing the bit to run cooler Centric tip for optimal hole geometry What's In The Box: Bosch HC2041 1/4-inch x 6-inch Carbide Tipped S4L SDS-Plus Bit
|
$1.93
|
Top stores
Tool King.com
$1.93
|
|
MLCS 6069 1/4-Inch shank Carbide-tipped Router Bit Set, 30-Piece
Excellent selection of commonly-used bits Quality 1/4-Inch shank carbide-tipped bits Great Value! 3.33 Dollar per bit Wood storage box included MLCS quality guaranteed, Manufacturer: MLCS
|
$99.95
|
Top stores
Amazon.com
$99.95
|
|
Bosch 85238M 1-1/4" Carbide Tipped Hinge Mortising Bits
Carbide tipped hinge mortising micrograin bits cut fast for making mortises when work is started at the edge and provide a smooth finish cut ideal for surfacing operations
|
$20.79
toolbarn.com
|
Top stores
toolbarn.com
$20.79
|
|
Champion C20-370 1-1/4 x 1-1/4 x 8 Brazed Carbide Tipped Square Nose Tool Bit
Champion carbide tipped tools are engineered for high performance turning, boring, facing, grooving,forming, threading and chamfering. All tools feature Carboloy® carbide grades and are manufactured in the U.S.A. Series 883 is recommended for machining cast iron and nonferrous materials. Series 370 is for general purpose and heavy duty machining of steels, including stainless
|
$25.15
hermanscentral.com
|
Top stores
hermanscentral.com
$25.15
|
|
Bosch 84509M 1-1/4-Inch Diameter 1-1/4-Inch Cut Carbide Tipped Wedge Tongue Router Bit 1/2-Inch Shank
Recommended for use with a routing table All bits must be inserted in the full length of the collet. Be sure to use only router bits and accessories specifically designed for your router, Weight: 0.0 lbs., Manufacturer: Bosch
|
$52.94
|
Top stores
Amazon.com
$52.94
|
|
Bosch 84532M 1-1/4-Inch Diameter 1-7/8-Inch Cut Carbide Tipped Multi-Profile Router Bit 1/2-Inch Shank
Recommended for use with a routing table All bits must be inserted in the full length of the collet. Be sure to use only router bits and accessories specifically designed for your router, Weight: 0.0 lbs., Manufacturer: Bosch
|
$50.04
|
Top stores
Amazon.com
$50.04
|
|
Bosch 85296M 1-1/4-Inch Diameter 23/32-Inch Cut Carbide Tipped Roundover Router Bit 1/4-Inch Shank With Ball Bearing
Recommended for use with a routing table All bits must be inserted in the full length of the collet. Be sure to use only router bits and accessories specifically designed for your router, Weight: 0.0 lbs., Manufacturer: Bosch
|
$25.23
|
Top stores
Amazon.com
$25.23
|
|
|
Bosch 85296MC 1-1/4-Inch Diameter 23/32-Inch Cut Carbide Tipped Roundover Router Bit 1/4-Inch Shank With Ball Bearing
Recommended for use with a routing table All bits must be inserted in the full length of the collet. Be sure to use only router bits and accessories specifically designed for your router, Weight: 0.0 lbs., Manufacturer: Bosch
|
$20.10
|
Top stores
Amazon.com
$20.10
|
|
Bosch 85299M 1-1/4-Inch Diameter 59/64-Inch Cut 22.5 Degree Carbide Tipped Chamfer Router Bit 1/2-Inch Shank With Ball Bearing
Recommended for use with a routing table All bits must be inserted in the full length of the collet. Be sure to use only router bits and accessories specifically designed for your router, Weight: 0.0 lbs., Manufacturer: Bosch
|
$30.29
|
Top stores
Amazon.com
$30.29
|
|
Bosch 85466M 1-1/4-Inch Diameter 1-1/4-Inch Cut Carbide Tipped Double Flute Straight Router Bit 1/2-Inch Shank
Recommended for use with a routing table All bits must be inserted in the full length of the collet. Be sure to use only router bits and accessories specifically designed for your router, Weight: 0.0 lbs., Manufacturer: Bosch
|
$23.59
|
Top stores
Amazon.com
$23.59
|
|
Bosch 85496M 1-1/4-Inch Diameter 23/32-Inch Cut Carbide Tipped Beading Router Bit 1/4-Inch Shank With Ball Bearing
Recommended for use with a routing table All bits must be inserted in the full length of the collet. Be sure to use only router bits and accessories specifically designed for your router, Weight: 0.0 lbs., Manufacturer: Bosch
|
$16.37
|
Top stores
Amazon.com
$16.37
|
|
|
Bosch 85496MC 1-1/4-Inch Diameter 23/32-Inch Cut Carbide Tipped Beading Router Bit 1/4-Inch Shank With Ball Bearing
Recommended for use with a routing table All bits must be inserted in the full length of the collet. Be sure to use only router bits and accessories specifically designed for your router, Manufacturer: Bosch
|
$30.96
|
Top stores
Amazon.com
$30.96
|
|
Bosch 85579M 1-1/4-Inch Diameter 1/2-Inch Cut Classical Carbide Tipped Router Bit 1/4-Inch Shank
Recommended for use with a routing table All bits must be inserted in the full length of the collet. Be sure to use only router bits and accessories specifically designed for your router, Weight: 0.0 lbs., Manufacturer: Bosch
|
$30.41
|
Top stores
Amazon.com
$30.41
|
|
|
Bosch 85579MC 1-1/4-Inch Diameter 1/2-Inch Cut Classical Carbide Tipped Router Bit 1/4-Inch Shank
Recommended for use with a routing table All bits must be inserted in the full length of the collet. Be sure to use only router bits and accessories specifically designed for your router, Weight: 0.0 lbs., Manufacturer: Bosch
|
$32.79
|
Top stores
Amazon.com
$32.79
|
|
|
Bosch 85580M 1-1/4-Inch Diameter 1/2-Inch Cut Classical Carbide Tipped Router Bit 1/2-Inch Shank
Recommended for use with a routing table All bits must be inserted in the full length of the collet. Be sure to use only router bits and accessories specifically designed for your router, Weight: 0.0 lbs., Manufacturer: Bosch
|
$34.57
|
Top stores
Amazon.com
$34.57
|
