|
1X Miller Dowel Joinery Kit w/ 50 Birch Dowels & 1TF Drill Bit #B12D11- Kit
Stepped dowels presents a new approach to good old dowel joints. The result is the unique, step-sided Miller Dowel. It holds a joint together in a fashion similar to a standard dowel but, offers some distinct advantages. The stepped drill bit bores a clean hole and prevents the mating boards from separating as you drill, thanks to the shoulders that apply downward pressure. The dowel drops about 2/3 of the way into the hole without binding, making installation easier. Small gaps created at each... 
|
$24.99
japanwoodworker.com
|
Top stores
japanwoodworker.com
$24.99
|
|
1X Miller Dowel Trufit Drill Bit
Peg construction traditionally involves the difficult task of driving a pin dowel into a hole that is just as tight at the top as it is at the bottom. Not only do you have to use a hammer from the very beginning, but it only gets tougher as you get deeper. TruFit Drill Bits, which are stepped to match a correspondingly-sized Miller Dowel. It is designed with an aggressive helix and polished flutes for efficient chip removal. TruFit Drill Bits form precise pilot holes that provide a perfect fit...
|
$19.99
woodcraft.com
|
Top stores
woodcraft.com
$19.99
|
|
|
1X Miller Dowel Joinery Kit - 50 Birch MD's and 1 TF Drill Bit
Wooden pegs have been used since Medieval times to fasten planks, secure joints in timber frame construction, and even to build elaborate helicoidal stairs. Miller Dowel invented a way to make use of these elegant time-proven fasteners simple and quick. The possibilities are endless!
|
$25.00
craftsmanstudio.com
|
Top stores
craftsmanstudio.com
$25.00
|
|
1X Miller Dowels
To use the Miller Dowel system, you simply align and secure the wood pieces to be joined. Next, you drill the stepped pilot hole for your chosen dowel using the Miller Dowel Drill Bit. Spread a small amount of glue on the ribbed sections of your dowel and insert it so that it drops roughly 2/3rds of its length. It will self-center with the 2nd board even if you haven’t preglued. Tap the dowel until it’s fully inserted and trim or sand the raised portion. It’s that easy to use, and by doing so, you...
|
$22.75
McFeely's
|
Top stores
McFeely's
$22.75
|
|
Miller Dowel 1X Drill Bit
Woodworking Tools and Supplies at Highland Woodworking – make Highland your woodworking tool supply source. We've been keeping woodworkers informed about the best woodworking tools, tips & techniques since mailing our first tool catalog in 1978. Tool purchases are backed by Highland Woodworking's 60-day money back guarantee.
|
$18.99
Highland Woodworking
|
Top stores
Highland Woodworking
$18.99
|
|
1X TruFit Drill Bit - Miller Dowel #QD12D11
* Three positive locking flats are ground on the shank to prevent spin-out in the drill chuck. * A depth groove is ground into the shank to assist the user in judging the depth of the pilot hole. This groove is deep enough to hold a rubber O-ring, if desired. * A split point prevents walking along the grain when starting a new pilot hole. * The overall lengths of our stepped drills are slightly longer than their corresponding Miller Dowel, which provides a small well at the bottom of the pilot...
|
$17.99
japanwoodworker.com
|
Top stores
japanwoodworker.com
$17.99
|
|
|
Small Miller Dowel Kit (Model 1X)
The two-part system consists of a stepped hardwood dowel and matching HSS (high-speed steel) drill bit. The great advantage of stepped dowels is easy insertion with minimal glue stripping since there is no scouring effect until they are three-quarters in. Excess dowel is trimmed and sanded flush. The dowels, available in birch, cherry, oak and walnut, are ribbed to provide greater surface area for adhesive.
|
$26.50
leevalley.com
|
Top stores
leevalley.com
$26.50
|
