481 results for "1999 Audi A6 Power Steering Rack and Pinion" between $5.00 and $500.00

Guaranteed to stop and prevent leaks, eliminate power steering pump noise and reduce chatter in rack & pinion systems. Stops leaks from hardened or shrunken seals; keeps seals and "O" rings pliable. Quiets noisy power steering pumps. Eliminates rack & pinion chatter (also known as "morning sickness"). Prevents foaming and fluid oxidation; prolongs fluid life. Extends life of pump and rack & pinion assembly. Performs in extreme temperatures. Compatible with all approved power-steering fluids.

Mustang II upgrade high performance power steering rack and pinion ships oversized.

1999 Audi A4 Rack and Pinion Complete Unit SKU: 26-9006 Rack and Pinion Complete Unit Brand: Cardone 99 Audi Rack and Pinion Complete Unit Steering Cardone Audi Rack and Pinion Complete Unit Parts. Steering Rack

1999 Audi A6 Quattro Rack and Pinion Bellow Kit SKU: 103-2900 Right Rack and Pinion Bellow Kit Right Brand: Beck Arnley 99 Audi Rack and Pinion Bellow Kit Steering Beck Arnley Audi Rack and Pinion Bellow Kit Parts. Steering Rack Boot Kit

Our patented line of high performance center-take-off rack and pinions enables correct geometry and a level of positive, direct steering that is not possible with adapted OEM units. Both manual and power versions feature quick ratio, straightcut gears, requiring only three turns lock-to-lock (standard OEM 4-5/8 turns, Performance OEM 3-3/4 turns). The unique modular design utilizes an assortment of mounting brackets and centerlinks to adapt to various classic...

These rack and pinions are remanufacturered & rebuilt to OEM specs. Includes pre-installed boots as shown in the image. Installation will take about 4 - 6 hours. No core charge required! For left hand drive models only.

The most common type of steering used in modern cars is the rack and pinion. Where the steering wheel turns the pinion gear, the pinion moves the rack. The working of this type of steering differs when it comes to manual and power steering system. The Audi power steering rack works slightly different from the manual system. The design of the rack differs in the power steering. Unlike the manual steering, the power steering rack has a cylinder with the piston. The piston which is connected to the...

An outstanding value in replacement steering systems, the "Rack" comes with a back-mount design for simple installation. The "Rack" is recommended for single engine, power-assisted outboards up to 24' with up to 16" steering wheels. 4.0 turns lock-to-lock. Standard 3/4" tapered shaft. Heavy-duty, corrosion-resistant construction meets NMMA requirements and ABYC safety standards. Available in 9' - 18' lengths.

2000 Audi A6 Power Steering Rack is for 8 Cyl Models. OEM, Aftermarket, and Remanufactured versions available for your 2000 Audi A6

This bushing set is to replace the bushings in your power steering rack. Under hard use the old stock bushings can get pounded out. This product is the right solution for Road Racing, Auto-x and street.

Rack and Pinion Kit -- Small Block, with headers; Manual steering that feels like power steering. Easy installation that maintains the original suspension. No welding. No fabrication. Due to many variations, we recommend contacting us with your specific application assure the correct kit. Superior Mustang Parts C5ZZ-3304-RPSH C5ZZ-3304-RPSHK

BECK ARNLEY COMPLETE HYDRAULIC POWER RACK AND PINION ASSEMBLY, REMANUFACTURED -- Includes steering rack boot; Does not include mount bushings; This is a high quality, direct fit OE replacement hydraulic power rack and pinion assembly.

C STEERING ASM/RACK & PINION-POWER; H STEERING ASM/RACK & PINION-POWER; MUST ORDER GEAR KIT, 7829884-PINION BEARING KIT IS NO LONGER SERVICED.; PART OF 6.230 7839153-ROD KIT, INNER TIE; PART OF 6.233 7843189-ROD KIT, OUTER TIE; PART OF 6.242 7843190-BOOT KIT, R & P (EXC F41)(*15); PART OF 6.242 7843190-BOOT KIT, RACK & PINION; PART OF 6.508 26005431-GEAR KIT, P.S. (PARTIAL)(*15); PART OF 6.508 26010340-SEAL KIT, VALVE SPLIT RING; PART OF 6.525 26023755-BEARING KIT, STUB SHAFT; PART OF 6.525...

A1 CARDONE HYDRAULIC POWER RACK AND PINION ASSEMBLY, REMANUFACTURED -- Includes inner tie rods; This complete and OE quality replacement features micro-finished surfaces as well as 100 percent new O-rings and lip seals that ensure no leaks while providing quality performance and extended unit life; With A1 Cardone's limited 3-year or 36,000-mile warranty.

Billet Steering Rack. Center Mount. This Rack & Pinion measures 15-1/4" to 16-1/4" from eye to eye. It will handle a Charlynn if you want Power Steering. This one is upgraded with a Billet Housing. Recommend for 4 seater up to 3000 lbs. The pinion will travel 3/4 of a turn from center to lock. The rack will travel 2" from center to lock. Distance between mounting holes is 6". Input shaft is 5/8 with 36 splines. You will need to use Heim Joints and custom Tie Rods. I run this same rack on my 4 seat...

Car Years: 1965, 1966 VERSATILE POWER STEERING WITHOUT PUMP THIS POWER RACK AND PINION KIT IS THE MOST VERSATILE KIT WE HAVE INSTALLED THUS FAR. WE HAVE INSTALLED THIS KIT ON MUSTANGS EQUIPPED WITH 5-SPEED MANUAL TRANSMISSIONS AND AUTOMATIC TRANSMISSIONS AS WELL. WE HAVE ALSO TESTED LONG TUBE HEADERS UNTIL WE FOUND HEADERS THAT PERFORM WELL AND CLEAR PERFECTLY. WE LIKE THE WAY THIS KIT IS ENGINEERED FOR PLACEMENT AND FIT. THIS SYSTEM FUNCTIONS WELL WITH YOUR EXISTING POWER STEERING PUMP OR IT CAN...

Reduce weight and streamline your engine compartment with this manual rack and pinion deluxe installation kit. It eliminates the power rack, pump, pulley, and rag joint for a total vehicle weight reduction of more than 30 lbs. It provides smooth, responsive vehicle steering, and is ideal for drag race and street use.

This u-joint kit is required when installing a Unisteer rack and pinion set up. It connects the steering column to the rack. Includes the shaft, 2 u-joints for stock steering columns, 1/4" drill bit, roll pin and instructions. U-joint kits designed for small block applications only.