294 results for "15 gauge finish nailer" between $50.00 and $400.00

Angled Finish Nailer Kit, Gauge 15, Fastener Range 1-1/4 to 2-1/2 Inches, Magazine Capacity 130, Air Flow per Shot 0.04 CFM, Maximum Pressure 70-120 PSI, Tool Weight 3.8 Pounds, Height 10 Inches, Length 14 11/16 Inches, Width 3 1/4 Inches

Finish Nailer, Cordless, Finish Head Style, Adhesive Collation Type, 15 Gauge, Magazine Capacity 100 (2 Strip), Rear Exhaust, No Mar Nose Cap Tip, Aluminum Housing, Color Gray, Sequential Trigger, Features Dry Fire Lockout, Low Battery Light, Tool-less Jam Release And Depth Of Drive, And Variable Position Hook, For Use With 15-gauge Angled Finish Nails

15 Gauge 2-1/2-in Angled Finish Nailer - FNA250-15. Safety Glasses. No Mar Tip. Carrying Case & 15 Gauge 2-1/2-in Angled Finish Nailer - FNA250-15. Safety Glasses. No Mar Tip. Carrying Case

Shop for Air Nailers & Nails at The Home Depot. The Senco SFN30 15-Gauge Finish Nailer features a no-lube design that eliminates the risk of oil stains on your work surfaces. It is ideal for construction, furniture and cabinets, picture frames and certain plastics. This nailer's depth of drive can be adjusted for flush driving or countersinks. It is lightweight and has a belt hook that attaches for right- or left-handed users.

Cordless finish nailer uses 1" - 2-1/2" FN nails. Lightweight - 4 lb. and precision balanced. Tool-free depth control & tool-free jamb -. clearance reduces tool downtime. Over-molded grip for comfort & control. Comes with utility hook, battery wall charger, -. battery car charger - charges in 1 hour. Order fuel cell - 9B12062R separately.

Industrial quality. Lightweight, only weighs 3.8 lb. Good balance for maneuverability and ease of operation. Compact, but powerful enough (400 in./lb. of driving power) for construction applications, hardwood floor installation, and cabinet building. Oil-free engine. Dial-A-Depth adjustment gives precise nail penetration control. Sequential trip operation assures nail placement. Nonmarring contact foot. Accepts nail sizes from 1-1/4" to 2-1/2" with no adjustments. 100 nail magazine capacity. Air...

Grip-Rite GRTAN250 Specifications: Firing Mode: Sequential Magazine Capacity: 100 Operating Pressure: 70-120 PSI Fastener Type: 15 Gauge 'DA' Series finish Fastener Range: 1-1/4"- 2-1/2" Collation: Mylar Size: 11.6"H x 13.9"L x 4.4"W Tool Weight: 4.8 lbs. Grip-Rite GRTAN250 Includes: Safety glasses Tool oil Hex wrenches Male coupler Optional 'bump fire' trigger kit Carrying caseGrip-Rite GRTAN250 Features: Rotating belt hook Magnesium housing Tool-free jam clearing...

Cordless finish nailer uses 1" - 2-1/2" FN nails. Lightweight - 4 lb. and precision balanced. Tool-free depth control & tool-free jamb -. clearance reduces tool downtime. Over-molded grip for comfort & control. Comes with utility hook, battery wall charger, -. battery car charger - charges in 1 hour. Order fuel cell - 9B12062R separately. Weight: 11.20 lb. UPC: 077914053132. Manufacturer Part No: GFN1564K.

Oil-free operation requires no regular maintenance and eliminates the risk of oil stains. Lightweight magnesium design for added durability. Adjustable depth guide sets nails to desired depths quickly and conveniently. Tool-free removable magazine for fast cleaning and jam clearing. Specs: Height: 11.63"; Length: 140.69"; Width: 3.13"; Weight: 3.8 lbs: Driving Power: 400 Inch Lbs.; Magazine Capacity: 130 Nails; Operating Pressure: 70-120 PSI; Thread Fitting Type: 1/4" NPT. Includes: Finish Nailer...

With a range of 1" to 2.5" and 15ga., there is no trim job you can't do with this gun. If there is, you're building it wrong. Plenty of power and light weight. Don't buy a brad nailer for trim jobs because they're cheap, they don't have heads on the nails and the trim will work loose. This 15ga. nailer has the right diameter nails to hold up to any abuse the mill work might go through. Nails load easily through the end of the magazine, then just pull back the locking mechanism and your loaded. Nose...

3 Year Limited Warranty. Sequential or bump firing modes. 34 degree angled magazine (up to 110 nails capacity) will accept DEWALT or any competitive brand 34 degree 15GA standard DA type nails. Work - surface headlights for visibility in low-light conditions. 6-position depth adjustment wheel for easy and consitent depth change. Contact trip lock off allows trigger to be disabled when not in use. Too-free jam clear for easy removal of jammed nails. 1 hour charger. 18V XRP™ battery. reversible...

I opted to spend the extra cash for a gas nailer. After a bunch of research i decided to go with the Bostitch as opposed to the Passload - mostly because of the Li-Ion batteries and past experience with Bostitch. I couldn't find any Bostitch brand finish nailer gas but after reading on another review that the passload gas will work in it i took a chance and bought that (all i could find locally). The Passload gas does work perfect, you just need to snap the plastic top of the canaster down before...

Hitachi NT65MA2 is a 15-Gauge 2-1/2” Angled Finish Nailer with Blow Nozzle. This tool is 4.4 lbs, lightweight and well balanced for easy maneuverability. The selective actuation (ANSI Compliant), allows transition from single actuation to contact actuation. It has a Tool-less clogged nail release mechanism for greater ease of use and Depth of drive adjustment, for accurate nail depth in varying materials. Unique air duster, clears debris before material installation. The adjustable air deflector...

Hitachi´s 15-gauge 2-1/2 IN angled finish nailer is the ideal 15-gauge angled finish nailer for installing molding, chair rail, cabinetry, and other fine finish applications. The unique air duster button on the model No. NT65MA2 allows the user to clear away dust and debris from the work surface in preparation for nailing or gluing. It features a tool-less, easy-to-clear nose for quick and simple nail extraction should a nail jam during use. A simple flip of the selective actuation switch allows...

Light weight only 4.6 lbs. (2.1kg). Compact and well balanced body. Powerful - Most powerful tool in its class. Selective trigger system. Dial adjustable depth control. Easy jam clearance. Adjustable exhaust deflector. Comes with plastic carrying case. Comfortable rubber grip. Mp-mar contact tip option included. Applications: *Paneling *Trim *Upholstery *Trim boards in furniture *Door & window casings *Cabinet face frames *Decoration *Wood furniture.

The Pioneer 15 Gauge 2-1/2'' Angle Finish Nailer features a lightweight aluminum housing for handling with a quick release design for clearing jams. Includes molded case.

Dewalt Brad Nailers, Air Powered can accommodate 1"-2" nails. The B242740 and B242741 models can deliver an operating pressure of 70-120 Pounds per Square Inch (PSI). They feature a trigger lock-off feature which disables the trigger to prevent accidents.