320 results for "14 inch band saw" between $10.00 and $2,000.00

Bandsaw, Horizontal, Motor Voltage 230, 2 Hp, 1 Phase, Speeds (fpm) 66-264, Cutting Capacity Round (in.) 13, Cutting Capacity Rectangle (in.) 13 X 16-1/2, Cutting Capacity Square (in.) 13 X 13, Cutting Angle (deg.) 45, Max. Blade Length (in.) 130-1/2 In., Max. Blade Width (in.) 1-1/4, Blade Thickness (in.) 0.042, Blade Wheels Dia. (in.) 14 In., Overall Height (in.) 43 In., Overall Width (in.) 22 In., Overall Depth (in.) 68 In.

The Shop Fox 14in. Band Saw is the most popular size and is loaded with features usually found on larger, more expensive machines. Features such as extruded aluminum fence and rails, quick-rele...

Horizontal Miter Band Saw, 10 X 14 In., Motor Voltage 110/220, 1-1/2 Hp, 60 Hz, Single Phase, Number Of Speeds Variable, Speeds (fpm) 100 To 350, Cutting Capacity Round (in.) 10, Cutting Capacity Rectangle (in.) 2 X 16 /10 X 14, Cutting Capacity Square (in.) 10 @ 90 Degrees , Max. Thickness Of Cut (in.) 7, Cutting Angle (deg.) 0 To 45, Miter Capacity (deg.) Head Swivels 0-45, Max. Blade Length (in.) 135, Min. Blade Length (in.) 135, Max. Blade Width (in.) 1, Min. Blade Width (in.) 1

JWBS-14MW 14 in. Band Saw - 708116K

Brand new Jet Model JWBS-14CS Bandsaw - The Jet 708115K includes: Jet 14" Bandsaw, Closed Stand

I've had this saw over 1-1/2 years. I bought it primarily to resaw lumber. Mine came with the 6" riser. If you plan to use one i recommend you do so before buying a bunch of blades. After shopping around, with the features included with this saw, it was the cheapest on the market. The quick release tensioner works well however i did have to repair the threads on the adjustment knob recently. The maybe a result of adjusting with it in the tensioned position? The fence that came with the saw...

The JET 14in. Closed Stand Band Saw is a simple but strong band saw that is perfect for the home shop. It requires very little setup when you first get it home but will promise years of solid heavy...

This is first time I have tried to replace tires on my 14" Delta band saw . Instructions said remove wheels-top no problem, however bottom was a different story. I decided not to remove it. Top wheel clamped to work bench and new tire clamped at seam, I stretched by hand and it dropped in place as I worked around the wheel. Bottom same procedure except I used a series of wedges to help slide tire over edge of wheel. Heating could have helped, which I did not do. Runs great.

Construction - Heavy Steel; Welded And Machined For Accuracy And Durability

Description This four speed woodworking band saw allows you to cut curves and compound curves in wood or plastic up to 6” thick! The precision cast iron table tilts 45 degrees for bevel cuts and the table groove makes accurate measurements with a miter gauge easy. Working up to speeds of 2670 feet per minute, this band saw is ideal for handling a variety of woodworking tasks. Precision cast iron table tilts 45° for bevel cutsTable groove for accurate measurement with a miter gaugeSpeeds: 600,...

* Motor: 3/4HP 120V AC, 60Hz, UL * Spindle RPM speed: 170, 289, 459, 703 RPM * Cutting capacity: 6" x 14" * Blade Width: 1/8", 3/16", 1/4", 3/8", 1/2", 3/4"W * Blade Size: 93-1/2" * Table size: 15" x 15" * Table tilt: 0 to 45 degree * Package size: 43-3/4"L x 21"W x 12-1/2"D * Ship Wgt: 189 Lbs * Imported.

Replace your worn out bandsaw tire with this OEM tire from Delta. It fits all 14" Delta bandsaws. Delta recommends using 3M's Weather-Strip Adhesive to secure them to the wheels. You can warm the new tire in some hot water to make it more pliable prior to installation. 1" wide x 1/8" thick.

General International 14" woodcutting bandsaw: Cast Iron Frame and precision balanced aluminum wheels with replaceable rubber tires. Closed stand model features a rigid one-piece welded stand. Aluminum rip fence included. Precision metal miter gauge with handle. Deluxe bearing blade guides. (2) cutting speeds for excellent results in either hard or soft woods. Quick release blade tension lever. Blade length: 93-1/2" Blade width Min/Max: 1/8" / 3/4" Blade Speeds: 1800 & 3000 Lin FPM Table Size: 1...

Cutting Width: 13-1/2". Cutting Height:Under Guides 6". Cutting Height w/Riser: 12". Min. Saw Blade Width: 1/8". Max. Saw Blade Width: 3/4". Blade Length: 93-1/2". Blade Length with Riser: 105". Table Dimension: 15L x 15W. Table Tilt: 45 R, 10 L. Table Height From Floor: 43-1/2". Dust Port Diameter: OD4". Dust Collection Minimum: 300 CFM. Wheel Diameter: 14". Motor: 1HP, 115V. Overall Dimensions: 68 x 26 x 19. Net Weight: 185 lbs.

* Exclusive design, quick release precision T-square style rip fence with steel resaw attachment. * 60 watt halogen lamp built into the body. * Chip blower ensures a clean, visible cut line. * Extra-large, two-piece cast iron table consists of a 15" x 15" tilting (45° right, 10° left) section and a fixed 15" x 5" extension for a total working surface area of 15" x 20". * Balanced, nine-spoke cast iron wheels. * Easy-to-read tensioning gauge settings indicated in "blade width" increments. *...

*Miter gauge (with washer for T-slot table). *4" dust port x 2. *Quick change blade release/tensioning. *Blade tensioner indicator. *Micro adjusting geared table. *Height scale measurement. *Built in tracking window. *Motor: 2 HP, single-phase, 60 Hz, 220V, TEFC capacitor start induction. *Amps: 12. *Blade size: 132" long. *Blade sizes range: 1/8" - 1" wide. *Table size: 23-3/4" x 17-1/2" x 1-1/2" thick. *Table height above floor: 37-1/2". *Cutting capacity (throat): 16-1/8". *Maximum...

Motor: 3/4 HP, 110V/220V, single-phase, 9/4.5A, TEFC, 1725 RPM. Blade size: 93-1/2" (1/8" - 3/4"). Precision-ground cast iron table size: 14"L x 14"W x 1-1/2"H. Floor-to-table height: 43-7/8". Throat capacity left of blade: 13-1/2". Maximum cutting height: 6-1/4". Table tilt: left 15°, right 45°. Blade speed: 3,000 FPM. Shielded and lubricated bearings. Wheels: computer balanced aluminum. 165 lbs.