101 results for "14 grizzly bandsaw" between $10.00 and $2,000.00

Cutting capacity/throat: 13-1/2". Maximum cutting height: 6". Overall size: 66-1/2"H x 28"W x 30-1/4"D. Table height above floor: 43-5/16". Table tilt: 45° right, 10° left. Frame construction: Cast iron. Table construction: Precision ground cast iron. Fence construction: Deluxe extruded aluminum. Wheels: Fully balanced cast aluminum with rubber tires. Motor: 1 HP, TEFC, 110V / 220V single phase, 1725 RPM. Amps: 11 at 110V, 5.5 at 220V. Blade speeds: 1500 & 3200 FPM. Blade size: 92 1/...

Length: 140". Width: 1/4". TPI: 10-14 VP. Gauge: 0.025.

Enter the quantity next to the part you are ordering and press the "Add To Cart" button. If you cannot locate your part below, click on the appropriate diagram at the top of the page or contact our tech support department at techsupport@grizzly.com or 570-546-9663.

Power Requirement: 220V, Single-Phase, 60 Hz. Main motor 1-1/2 HP, 220V, 3-phase, 1725 RPM with single-phase inverter. Grinder motor 1/8 HP, 110V, single-phase. Maximum cutting height 7-1/2". Throat capacity 14-3/16". Std. Blade Len: 105-110". Blade size range 1/8" - 1/2". Blade speed variable 108 - 1800 FPM. Electric welder 2.0 KVA. Table tilt 45° right, 15° left. Floor to table height 35". Table size 21-5/16" x 19-3/4". Overall dimensions 62-5/8" x 15-1/8" x 37". Approx. shipping weight...

Need more capacity in a swivel mast saw? Check out the range of cuts you can get with this well engineered utility cutoff bandsaw. And, it comes with features that make it easy to use like fully adjustable ball bearing guides, infinitely adjustable hydraulic down feed, quick release vise, stock length stop and coolant system. Get the most saw for your money right here! Features: Swivel base with degree scale, Centralized control panel, Heavy-duty all steel, one piece base, Adjustable hydraulic down...

Motor: 5 HP, 220V, single-phase, TEFC capacitor start induction, 60 Hz, 22 amps. RPM: 1725. Table size: 25-1/2" x 21" x 2" thick. Table tilt: 5° left, 45° right. Floor to table height: 35-1/2". Cutting capacity/throat: 16-1/2". Maximum cutting height: 16". Blade size: 160-162" long. Blade sizes available: 1/8" - 1-3/8". Blade speed: 4500 FPM. Resaw fence size: 6" H x 23" L. Wheels: computer balanced cast iron with rubber tires. Wheel covers: pre-formed, hinged steel. Blade guides: dual...

Motor: 5 HP, 220V, single-phase. Precision ground cast iron table. Table size: 33-1/2" x 23-5/8" x 2". Table tilts 45° for bevel cuts. Floor to table height: 34-1/2". Table height with included riser: 34-1/2". Cutting capacity/throat: 24-1/2". Maximum cutting height: 16". Blade size: 180"-181-1/2" long. Uses blades from 1/4" to 1-1/2" wide. Blade speed: 5,300 FPM. Sealed and lubricated bearings. Overall height: 83-1/2". Overall width: 48". Overall depth: 32". Approximate shipping weight...

Capacity: 4-3/4" round. Two speeds: 190 FPM & 262 FPM. Blade size: 44-7/8" x 1/2". Table size: 7-1/2" x 5-1/2". Motor: 1 HP, 110V, single-phase, AC. Double insulated. Voltage: 110V, AC. Shipping Weight: 39 lbs.Converts from a bench-top metal cutoff saw to a hand-held portable metal cutting bandsaw in just seconds.

Variable frequency drive speed control. Left and right table tilting control. Upper and lower blade guides. Rack and pinion adjustment on upper blade guide support. Precision ground cast iron table. Fully balanced cast iron wheels with rubber tires. Quick release blade tension. Steel guide blocks. 2-1/2" universal dust port. Includes rip fence and miter gauge. Rip fence comes with: Right and left reading indicators T-slots for quick change attachments Dead lift quick release Ball bearing...

Brand new Olson Premium Band Saw Blade Fits most 14" Bandsaws, such as: Delta, Jet, Grizzly, Reliant, Craftsman, etc., 3/8" wide blade, 4 teeth per inch, hook style, Made from Cobalt/Molybdenum high speed steel teeth provide a superior cutting edge, Contents: One blade, Made in the U.S.A.

OLSON SAW" HARD EDGE FLEX BACK BAND SAW BLADE *93-1/2" long x 1/4" wide *6 TPI *Hard edge flexible back blade for cutting hard & soft wood, composition, plywood, plastic, mild steel, and non- ferrous metals *Skip tooth style *For general purpose contour cutting *Fits 14" Delta/Rockwell, Jet, Grizzly and most imported 14" band saws

Main motor: 30 HP, 220V/440V, 3-Phase. Elevation motor: 1/2 HP. Hydraulic pressure: 1000 PSI. Maximum cutting capacity: 10" x 16". Distance from blade to conveyor table: 1/4" - 10". Saw wheel diameter: 28" x 7/8". Saw blade size: 180" x 1" x 0.063". Saw blade speed: 7300 FPM. Conveyor belt sizes: 15-1/4" x 215-3/4" long and 11-1/4" x 215-3/4". Variable feed speed: 32 - 82 FPM. Conveyor table: 16" wide x 102" long. Floor to table height: 40". Overall height: 83 1/2". Overall width: 8...

A high silicon content resaw blade with an aggresive set and modified gullet to increase speed, extend life, and improve the straightness of cut. This blade improves on sawdust removal in a long or thick cut. Hawc Pro is the best all around blade for resawing up to 1/2" thick. It will last longer and cut straighter than conventional bandsaw blades due to its special design and induction hardened teeth.

The 3-4 Variable Pitch WoodSaver Plus band saw blade is an improved version of WoodSaver blade. The precision ground teeth have a variable 3-4 tooth design which cuts smoother, because it reduces chatter and vibration. The blade also has the narrowest kerf (.030"). This means even less of your expensive woods being lost to sawdust. The sides of the blade are polished to provide a smoother running blade. The back of the blade is polished round to help eliminate marring of the wood. The carbide impregnated...