|
Twin R Grade A-A Connection Welding Hoses - 12.5 ft
Gas Type : Acetylene Only. Grade : R. Connection Type : A-A. Hose I.D. : 3/16 in. Length : 12.500 ft. Operating Temp. : -40 degree F [Min], 212 degree F [Max]. Material : Synthetic Rubber. Color : Red/Green. Type : Welding Hose. UNSPSC : 23270000. 
|
$14.71
|
Top stores
Reliable Paper
$14.71
|
|
EXHAUST HOSE MARINE 2.38 HARDWALL WIRE 12.5' LGTH 118113
SHIELDSFLEX II MARINE WATER/EXHAUST HOSE (w/wire) Engine Intake Wet Exhaust Connections - Use Where Bends Or Long Lengths Required Bilge Pump Intake/Discharge Scupper Lines Toilet Intake, Discharge Holding Tank Vent, Pump Out Black synthetic rubber tube and cover. Reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Abrasion resistant. Odor permeation resistant. Temperature range: -20 to +200 F continuous...
|
$129.99
hamiltonmarine.com
|
Top stores
hamiltonmarine.com
$129.99
|
|
Trident Flex Marine Wet Exhaust Water Hose 2502384 2-3/8 inch ID x 12.5 ft Lgth
Trident Flex wet exhaust water hose feature features thick tube construction and cover with wire helix between 2 ply reinforcement.
|
$106.62
|
Top stores
Jamestown Distributors
$106.62
|
|
Shields Exhaust / Water Hose, 2 3/8 inch ID, 12.5' Long
Marine Exhaust / Water Hose is reinforced with 2 or 4 plies of synthetic cord and is made of black, heavy-walled synthetic rubber. This hose is primarily used for straight connections in wet exhaust systems and engine water circulation lines. It is resistant to engine heat, exhaust fumes, ozone, mild chemicals, antifreeze and saltwater. This hose also has double the ozone resistance required by SAEJ2006. The temperature ranges from -20°F - + 200°F continuous, +250°F intermittent. The hose meets SAE...
|
$119.00
marinedeal.com
|
Top stores
marinedeal.com
$119.00
|
|
Twin B-B Connection 0.25 in. Welding Hoses - 12.5 ft
Gas Type : Acetylene Only. Grade : R. Connection Type : B-B. Hose I.D. : 1/4 in. Length : 12.500 ft. Operating Temp. : -40 degree F [Min], 212 degree F [Max]. Material : Synthetic Rubber. Color : Red/Green. Type : Welding Hose. UNSPSC : 23270000.
|
$13.82
|
Top stores
Reliable Paper
$13.82
|
|
TurboTorch 252-03P Oxy/Acetylene Twin Torch Hose (0386-1094)
TurboTorch 252-03P Oxy/Acetylene Twin Torch Hose (0386-1094) 12 1/2' Twin Hose "A" Fitting
|
$47.00
airheadtools.com
|
Top stores
airheadtools.com
$47.00
|
|
Shields Exhaust / Water Hose, 1 3/8 inch ID, 12.5' Long
Marine Exhaust / Water Hose is reinforced with 2 or 4 plies of synthetic cord and is made of black, heavy-walled synthetic rubber. This hose is primarily used for straight connections in wet exhaust systems and engine water circulation lines. It is resistant to engine heat, exhaust fumes, ozone, mild chemicals, antifreeze and saltwater. This hose also has double the ozone resistance required by SAEJ2006. The temperature ranges from -20°F - + 200°F continuous, +250°F intermittent. The hose meets SAE...
|
$77.00
marinedeal.com
|
Top stores
marinedeal.com
$77.00
|
|
TRC Tridentflex Hardwall Exhaust Hose, 2 3/8 inch ID, 12 1/2' Long
Premium wet exhaust hose for longer bent connections. In smaller I.D.'s for engine intake, critical water, drain, scupper bilge & sanitation uses. Extra heavy tube and cover with helix between 2 ply reinforcement provides excellent flexibility and bend radius. Resists heat, ozone, exhaust, sani chemicals, panting and collapse. Exceeds New (SAE J2006, ABYC and NMMA) Stds.** ( see below ). Black High Temp EDPM Rubber 250°F (121°C). ISO 13363 Std. Pending.
|
$119.00
marinedeal.com
|
Top stores
marinedeal.com
$119.00
|
|
Shields Exhaust / Water Hose, 3 1/8 inch ID, 12.5' Long
Marine Exhaust / Water Hose is reinforced with 2 or 4 plies of synthetic cord and is made of black, heavy-walled synthetic rubber. This hose is primarily used for straight connections in wet exhaust systems and engine water circulation lines. It is resistant to engine heat, exhaust fumes, ozone, mild chemicals, antifreeze and saltwater. This hose also has double the ozone resistance required by SAEJ2006. The temperature ranges from -20°F - + 200°F continuous, +250°F intermittent. The hose meets SAE...
|
$156.00
marinedeal.com
|
Top stores
marinedeal.com
$156.00
|
|
TRC Tridentflex Hardwall Exhaust Hose, 3 1/8 inch ID, 12 1/2' Long
Premium wet exhaust hose for longer bent connections. In smaller I.D.'s for engine intake, critical water, drain, scupper bilge & sanitation uses. Extra heavy tube and cover with helix between 2 ply reinforcement provides excellent flexibility and bend radius. Resists heat, ozone, exhaust, sani chemicals, panting and collapse. Exceeds New (SAE J2006, ABYC and NMMA) Stds.** ( see below ). Black High Temp EDPM Rubber 250°F (121°C). ISO 13363 Std. Pending.
|
$149.00
marinedeal.com
|
Top stores
marinedeal.com
$149.00
|
|
Shields Shieldsaust Exhaust Hose, 3 1/8 inch ID , 12.5' Long
Shieldsaust - C has a black synthetic rubber tube and cover. It is reinforced with double wire helix imbedded between plies of synthetic cord and is abrasion resistant. It is resistant to exhaust fumes, ozone, mild chemicals, antifreeze, and saltwater. This hose is primarily used for wet exhaust connections with significant bends, engine intake and scupper lines. The temperature ranges from -20°F to + 200°F continuous, +250°F intermittent. The hose now has double the ozone resistance required by...
|
$209.00
marinedeal.com
|
Top stores
marinedeal.com
$209.00
|
|
|
EXHAUST HOSE MARINE 1.63" HRDWALL WIRE 12.5'/50' 118107
M.E. hose-type certified wet exhaust service for longer (4 x I.D.) and bent connections. Heavy wall with double helical wire between 4 spirals. Resists panting, callapse, heat, ozone, and exhaust fumes. Excellent flexibility & bend radius. Meets or exceeds USCG & ABYC recommendations.
|
$94.99
hamiltonmarine.com
|
Top stores
hamiltonmarine.com
$94.99
|
|
571F72 Prestolite 571F72 12-1/2' Twin Hose Assembly
Fitted Twin Hose Oxygen-Acetylene Assembly. 12.5' Long With 3/16 A-A Connections.
|
$33.36
southsidecontrol.com
|
Top stores
southsidecontrol.com
$33.36
|
|
TWIN WELDING HOSE BRAND NEW 3/16'' 12.5 FT W/WAR
|
$9.95
toolsteal.com
|
Top stores
toolsteal.com
$9.95
|
|
TRC Fuel Hose, USCG Type A2, 2 3/8 inch ID, 3 inch OD, 12 1/2' Long
NEW Oil-Free Design - no chance of oil leaks polluting our environment. More Energy Efficient than Oil-Filled Brands - costs less to operate. Pays for itself. Molded Glass Filled Nylon Scroud - guides water flow, and blocks debris. Stainless Steel Motor Shaft and Motor Housing - eliminates corrosion . Dual Internal Seals and Double Lip Shaft Seal - keep water and dirt out for long life. High Efficiency Motor and High Performance Propeller - give the most most flow for your energy dollars. Continuous...
|
$179.00
marinedeal.com
|
Top stores
marinedeal.com
$179.00
|
|
FUEL HOSE FILL 1.63 USCG TYPE A2 RED ST 12.5' 118147
SAE J1527-USCG Type A1-A2 Alcohol Resistant Fuel Line. Excellent quality marine fuel line hoses. Exceeds SAE J1527-USCG Type A1 (Feed line- 1/4", 5/16", 3/8", 1/2", 3/4") and A2 (Vert line 5/8") Standards. Thick nitrile tube and hypalon cover for excellent resistance to permeation, fire, heat, ozone, & aging by alcohol blended fuels. 4 spiral reinforcements gives excellent flexibility & bend radius.
|
$164.99
hamiltonmarine.com
|
Top stores
hamiltonmarine.com
$164.99
|
|
|
Shields™ Hose, div. Sierra Supply - EXHAUST / WATER HOSE (#88-2000344) - Performance Product Technologies
EXHAUST / WATER HOSE WITHOUT WIRE SERIES 200Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1. Features: Straight Connections In Wet Exhaust Systems Engine Water Circulation Lines Length12-1/2'OD1-9/64"ID3/4"
|
$58.62
perfprotech.com
|
Top stores
perfprotech.com
$58.62
|
|
|
HOSE ASS'Y 3/8 X 150" W/SHEATHING
|
$132.52
messicks.com
|
Top stores
messicks.com
$132.52
|
|
3/16" X 12 1/2 foot Grade T Twin Welding Hose With AB Fittings
RAD64003335 Features: -Price Is For One Each -Minimum Order Of 1.-Grade T Cut Length Welding Hose Is For Use With Fuel Gases Including Acetylene.-RADNOR.-For GRADE T Premium Quality Welding Hose For Use With Fuel Gases Including Acetylene. All Grade T Twin Line Hoses Are One Continuous Length Of Hose. Grade T Twin Line Welding Hose Has A Smooth Cover. Welding Hose Cover Is Red For Acetylene; Green For Oxygen..-If You Cut Or Heat With An Alternative Fuel Gas, Grade R or RM Welding Hose Is Not Recommended...
|
$26.99
airheadtools.com
|
Top stores
airheadtools.com
$26.99
|
