875 results for "12 inch miter saws" between $50.00 and $2,000.00

Blade Diam = 12 in. Arbor Diam = 5/8 in. Speed = 3800 rpm [Max]. Cutting Cap. 2 = 1-1/4 X 8-1/2 in. @ 45°/45° Right, 1-5/8 X 7-7/8 in. @ 0°/45° Left, 1-1/2 X 5-7/8 in. @ 0°/45° Right, 2 X 8-1/2 in. @ 45°/45° Left, 2-1/2 X 7-7/8 in. @ 0°/0°. Amps = 15.00 A. Power Cap. = 3 hp [Max]. Voltage = 120.00 VAC. No. of Teeth = 40. Height = 18 in. Includes = Carbide Tipped Blade, Dust Bag w/Elbow, Flip Over Crown Stops, Wrench Set. Weight = 55 lb.

Revolutionary compact slide system allows the saw head to slide along fixed rails, eliminating the need for rear clearance. Top-mounted, digital, LCD scale swivels to provide clear and accurate miter and bevel readings from any angle. Exclusive laser marker system from Hitachi increases cutting accuracy. Powerful 15 Amp motor with 1,850 Watts of max output power to tackle tough cutting jobs with ease. Micro miter and micro bevel adjustment knobs to dial-in to precise angles. Large pivoting fence...

Exclusive Wedge-and-Slot Miter Detent System-Consistent and precise miter angles over the life of the tool

Cross cutting and miter of brass, aluminum, copper and other non-ferrous metals with a miter saw. Lubricants are recommended when used for this application. Good for woodworking and cutting plastics. Tungsten carbide triple-chip grind produces clean cuts.

Robert Bosch Tool Corporation ("Seller") warrants to the original purchaser only, that all BOSCH portable and benchtop power tools will be free from defects in material or workmanship for a period of one year from date of purchase. SELLER'S SOLE OBLIGATION AND YOUR EXCLUSIVE REMEDY under this Limited Warranty and, to the extent permitted by law, any warranty or condition implied by law, shall be the repair or replacement of parts, without charge, which are defective in material or workmanship and...

Powerful 15 amps (full-load current) motor and aggressive tool design. The class-first digital display panel that indicates miter / bevel angles (only C12LCH and C12FCH models). Laser guide system for easier alignment with the ink line (only C12LCH and C12FCH models). Caution: DO NOT STARE INTO BEAM CLASS II LASER PRODUCT. Bevel angle easy and fine adjustment. Thumb actuated positive stops ( 0°, 15°, 22.5° 31.6°, and 45° right and left) for quick andeasy miter adjustment. 130mm(5-1/8" high...

Amps9.2. No-Load Speed5,500 RPM. Blade Diameter8-1/2". Arbor Size5/8". Bevel Angle RangeRight 0°-5°. Left 0°-48°. Miter Angle RangeRight 0°-57°. Left 0°-45°. Miter Detent Stops (R & L)15°, 22.5°, 31.6°, 45°. Cross Cut Capacity (90°)2-9/16" x 12". Splinter GuardYes. Soft Grip HandleYes. Sub FenceYes. Width21-27/32". Length31-3/32". Height19-3/32". Weight31 lbs.

Just return the power tool, properly packaged and postage prepaid to a Ridgid Authorized Service Center. You can obtain the location of the Service Center nearest to you by contacting a customer service representative at 800-860-4050 or on-line through our Service Center locater at www.ridgid.com. When you request warranty service, you must also present proof of purchase documentation (sales receipt/bill of sale). We will repair any faulty workmanship, and either repair or replace any defective part...

SELLER'S SOLE OBLIGATION AND YOUR EXCLUSIVE REMEDY under this Limited Warranty and, to the extent permitted by law, any warranty or condition implied by law, shall be the repair or replacement of parts, without charge, which are defective and which have not been misused, carelessly handled, or misrepaired by persons other than Seller or Authorized Factory Service Station. The complete tool must be returned, transportation prepaid, to any SKIL Factory Service Center or Authorized Service Station...

Powerful 15.0 AMP direct drive motor requires less maintenance and delivers 3,200 RPM. Large cutting capacity for up to 8" crown molding (nested), 6-1/2" baseboard (vertical), and 15" crosscut at 90°. Compact design with a patented 4-Steel Rail Sliding System further increases rigidity to produce superior cuts. Independent laser indicates line-of-cut whether blade is turning or not, with on/off switch and micro-adjustments for precise "left-of-blade" or "right-of-blade" cutting. Exclusive 6 linear...

Patented Axial-Glide™ system eliminates rails and the extra space needed for them. Articulated arm unfolds smoothly as saw extends forward with capacity to crosscut a 4" x 14" at 90°. Dual bevel, 47°. L / 47°. R, plus large miter range, 52°. L / 60°. R, for ample cut options. Integral left/right table extensions telescope out/in with tool-free operation. Clear guard for cut line visibility. Dust shroud moves with the arm to scoop up dust as it is coming off the blade. High visibility bevel...

10" blade diameter. 24T blade (fitted). 15.0 amp. Dual rail slide. Redeye laser line generator for improved operator cutting vision, faster set - up. Miter cuts 0 degrees to 52 degrees left and right, allowing a full range of miter cuts. Positive miter table stops for fast, convenient miter cuts. Bevel cutting 0 degrees to 45 degrees enables a large range of bevel and compound miter cuts. D-handle design with rubber grip for improved ergonomics and greater comfort. Adjustable depth of cut...

This 12"" dual compound miter saw offers the latest in power and technology. With its revolutionary, digital LCD digital scale and laser it takes all of the guess work out of miter and bevel cuts. This saw bevels right and left 0-48 degrees and Miters 0-52 degrees right and left aswell. The capacity allows you to cut an 8"" board on a crosscut or miter a 6"" board at 45 degrees. The C12LDH is powered by a belt driven 15 amp motor with a no-load RPM speed of 4,000. It has positive miter stops at ...

This is a well designed saw that is a delight to use. Add the laser washer to make lining up cuts a breeze. Changing blades is straightforward. Controls are at the front of the saw so there is no reaching over the machine when it is time to set/change a mitre or bevel. Initial set up simply involved checking the bevel and mitre angles. They were factory adjusted and right on. Both can be adjusted if necessary.This is a very stable platform with table extensions that are helpful for longer pieces...

Just return the power tool, properly packaged and postage prepaid to a Ridgid Authorized Service Center. You can obtain the location of the Service Center nearest to you by contacting a customer service representative at 800-860-4050 or on-line through our Service Center locater at www.ridgid.com. When you request warranty service, you must also present proof of purchase documentation (sales receipt/bill of sale). We will repair any faulty workmanship, and either repair or replace any defective part...

* Replacement Kerf Inserts. * Miter Saw Attachments. * Part Number BB1201. * Used on Model No. 3912. * Sales Pack Quantity 1. * Engineering Number 2610995088.