50 results for "12" Locking Clamp" between $10.00 and $200.00

Locking Chain Clamp, Pipe Cutter, Size 12 In., Capacity 4-33/64 In., Jaw Width 1-11/64 In., Jaw Type Chain, Spring Loaded Locking Mechanism, Butterfly Screw Mechanism, Black Finish, Alloy Steel, Locking Mechanism, Corrosion Resistant, For Welding And Pipe Cutting

* Micro-adjustment for quick pre-adjusting and repeat clamping. * Wide opening jaws provide greater stability. * Guarded release trigger. * Swivel pads hold tapered and delicate work. * 12-1/2" jaw capacity. * 15-1/2" throat depth.

Heavy-duty jaw grips around work of all shapes; ideal for plumbers mechanics welders and others working with large objects. Ideal for tightening clamping twisting and turning. Turn screw to adjust pressure and fit work. Stays adjusted for repetitive use. Constructed of high-grade heat-treated alloy steel for maximum toughness and durability. Guarded release trigger quickly unlocks and protects from accidental release. Hardened teeth are designed to grip from any angle.

Pipe Clamp, Capacity (in.) 2-3/4, Throat Depth (in.) 3-9/64, Alloy Steel Handle, Alloy Steel Bar, For Clamping And Holding Pipes, 12 In. Length, 1-3/8 In. Jaw Height, Corrosion Resistant Finish, Locking, Spring Loaded Release Lever

FasNSeal Collection Support Clamp for 12 Inch FasNSeal Vent PipeWarranty Notice: M&G DuraVent warranty applies to this professional grade product only when installed by a trained professional installer. This FasNSeal Support Clamp for 12 Inch FasNSeal Vent Pipe features a patented built in mechanical locking band and triple lipped directional gaskets which allows for ease of installation. Use to support vertical and horizontal runs. Recommended every 10’ in the vertical run. Use additional Support...

Opening Size = 12 in [Max]. Throat Depth = 4 3/4 in. Bar Width = 1 3/16 in. Bar Thickness = 9/16 in. Spindle Diameter = 3/4 in. Load Cap. = 2600 lb. Body Material = Forged Steel. Finish = Chrome Nickel. Locking Type = Thread Locking. Handle Type = Sliding Pin. Handle Material = Steel. Type = Bar Clamp. Wt. = 4 lb.

Vertical Beam Clamp features stainless steel and aluminum constructions with a unique pin and screw locking mechanism. Easily adjusts to fit beams from 2-1/2" – 12" wide with flange thicknesses up to 1-1/2". Ideal for vertical and horizontal I-Beam structures. Rugged Stainless Steel and Aluminum Construction.

Quick change spring-loaded screw. Heat-treated black oxide carbon steel I-beam bar. Removable resin pads. Patented locking swivel jaw conforms to uneven work surfaces. Quick release trigger provides 1-handed use. Up to 300 lb. of sustained clamping force.

Brand new Irwin Quick Grip Bar Clamp - Spreader 12" max. jaw opening with a 2-7/16" throat depth, Quick release trigger allows for one handed use, Soft, durable pads won't mark work, High tech resin construction is strong yet lightweight, smaller for tight workspaces, Positive locking action holds work tight, Made in the U.S.A.

These clamps use a revolutionary one hand operation Unique pistol grip handle allows user to hold the clamp and adjust jaw pressure with just one hand One finger unlocks the quick release trigger Positive locking action holds work tight High tech resin constructed jaws and heat treated steel bar Large pliable pads won't mar work The welding clamps are the same design as the regular clamps except the jaws are made with heat treated carbon steel and the pads are made from splatter resistant copper...

This Tradesman Medium Duty Clamp has a 12" clamping capacity, 1" x 1/4" rail size, 2-1/2" throat depth, and nominal clamping pressure of 600 lbs. It is part of Bessey's Tradesman line of bar clamps that features a patented nonslip locking system, greater holding power than any other clutch-style clamp, corrugated cast jaws, high quality galvanized profiled rail, coated oversized acme thread, large ergonomically shaped wood handle, and glue-resistant non-marring plastic caps.

Opening Size = 0 in [Min], 12 in [Max]. Throat Depth = 2 7/16 in. Jaw Bar Bar Spindle Jaw Material = Glass-Filled Nylon. Body Material = Steel. Locking Type = Mechanical Locking. Handle Type = Pistol Grip. Handle Material = Glass Reinforced Nylon. Type = Bar Clamp.

Medium Duty Malleable Cast Bar Clamp The original Bessey design is unmistakable with its unique non-slip locking mechanism... always look for the set screw to make sure it's a Bessey Tradesmen, the reliable workhorse that woodworkers around the world depend on when clamping is serious business. 5 1/2" Throat Depth, 12" Clamping Capacity, Clamping Force 1320 Lbs.

Opening Size = 2 in [Min], 12 1/4 in [Max]. Throat Depth = 6 5/16 in. Spindle Diameter = 7/8 in. Min. Proof Test = 9300 lb. Overall Length = 12 in. Body Material = Drop Forged Steel. Finish = Lacquered. Locking Handle Packing Wt. = 9300 lb.

Unlike a "squeezer" clamp with a pump-action jaw advance, this one has a fast-acting sliding jaw with a locking handle mechanism (similar to locking pliers) to instantly apply or release force. The integral thumb wheel adjusts clamping force (up to 700 lb) to suit the application. The force you set is maintained for repetitive use, regardless of the jaw opening, speeding assembly work. The moveable jaw has a slight inward cant that becomes parallel...

* Combines original profiled rail and patented locking device

Malleable cast jaws, press fitted to rail. Patented locking mechanism won't let go. Cold drawn, profiled steel rail. Oversized acme thread. Large diameter pad surface. Glue resistant, non-mar plastic caps. 2-1/2" nominal throat depth, 12" nominal opening, 1" X 1/4" nominal rail size and 600 Lbs. nominal clamping pressure.

SAE No. = 188. Clamp Diameter = 2 in [Min], 12 1/4 in [Max]. Hose I.D. = 2 in [Min], 11 1/2 in [Max]. Width = 9/16 in. Bolt/Screw Bolt/Screw Material = Carbon Steel. Material = Stainless Steel, Housing & Band. Handle Locking Head.