1016 results for "11/64'' Tapered High Speed Steel Drill Bit" between $10.00 and $150.00

Point Style: Tapered Point Material: High Speed Steel Flute Length: 2-1/8" Overall Length: 3-1/4" Shank Diameter: 11/64" Applications: Tapered Holes for Full Body Shank Screws in Wood and Plastics.

NAS 907 type B standards, used in the aerospace industry Extra-length drill bits, provide long reach 135-degree split-point angles, is self-centering, reduces walking, good for hard material, and reduces pressure on cutting edges Steam tempering (also called black oxide) retains cutting fluid and prevents chip to tool welding High-speed steel (HSS), for use on a wide variety of materials

Titanium nitride coating extends the life of the bit; lasts up to six times longer than standard high speed steel drill bits Heavy-duty web design provides extreme rigidity when drilling in metal applications Shorter cutting lips reduce torque when drilling in high tensile strength materials 135-degree split point reduces feed pressure for easier penetration without work hardening

High performance metal drilling for portable drill users, works well on curved surfaces Revolutionary tip design stays sharper longer and drills up to 10x faster than other leading drill bits High speed steel features a black body and gold flute Self-centering TURBOMAX tip for clean entry and fast starts; stays sharp longer Three flatted shank on 3/16" and above for better chuck grip

130-degree ADX point angles, for ease in starting, accurate centering, and improved chip removal Short-length, for better rigidity and increased strength Titanium nitride (TiN) coating, to extend cutting tool life and permit faster cutting speeds than with uncoated tools High-speed steel (HSS), for use on a wide variety of materials Round shanks, for use on a variety of tool-holding systems

135-degree split-point angle for self-centering, to reduce walking, for use with hard materials, and to reduce pressure on cutting edges Purple/bronze oxide finish, to help retain cutting fluid and prevent chip to tool welding High-speed steel (HSS), for use on a wide variety of materials Jobber-length, for a wide range of applications Round shank, for a wide variety of tool-holding systems

NAS 907 type B standards, used in the aerospace industry Steam tempering (black oxide) finish, for improving lubricity, and resisting corrosion, chipping, or flaking Jobber-length, for a wide range of applications 135-degree split-point angles are self-centering, to reduce walking, are good for hard material, and to reduce pressure on cutting edges High-speed steel (HSS), for use on a wide variety of materials

Combination of parabolic flute form and point design produces tighter hole tolerances, heightened chip-breaking action, and improved coolant flow for deep-hole drilling Wide flute spacing disperses chips away from the cutting edge more rapidly than conventional parabolic drills, resulting in tighter , more manageable chips and less chip packing 135 degree modified notch point is self-centering, provides greater stability, prevents "walking," and lessens work hardening Manufactured from premium high...

Manufactured to NAS 907 Type C geometry aerospace specifications Manufactured from premium high-speed steel 135 degree P3 split point is self-centering for reduced thrust and easier penetration Shorter flute and overall length provide superior rigidity to minimize deflection when using heavy feed rates Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools

With 30 degree helix High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge Round shanks allow use with a wide variety of toolholding systems When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging

Short-length, for better rigidity and increased strength 135-degree split point angles are self-centering, to reduce walking, are good for hard material, and to reduce pressure on cutting edges Round shanks, for use on a variety of tool-holding systems Uncoated (bright) finish with Titanium Nitride (TiN) only at the tip, for hardness and heat resistance High-speed steel (HSS), for use on a wide variety of materials

130-degree ADX point angles, for starting holes, helps with accurate centering and chip removal Jobber-length, for a wide range of applications Titanium nitride (TiN) coating helps extend cutting tool life and permit faster cutting speeds than with uncoated tools High-speed steel (HSS), for use on a wide variety of materials Round shanks, for use on a variety of tool-holding systems

Parabolic flute design offers enhanced chip removal, coolant flow to the drill point and heat dissipation Extra-length drill bits have longer flutes and overall lengths than jobber drill bits, for deeper holes 135-degree radius spilt point, is self-centering, reduces walking, good for hard material, and reduces pressure on cutting edges Uncoated (bright), economical and useful with a wide range of drilling materials High-speed steel (HSS), for use on a wide variety of materials

Parabolic flute design offers enhanced chip removal, coolant flow to the drill point and heat dissipation 135-degree radius split-point is self-centering, reduces walking, good for hard material, and reduces pressure on cutting edges Jobber-length drill bits, most common length drill bit, suitable for a wide range of applications Uncoated (bright), economical and useful with a wide range of drilling materials High-speed steel (HSS), for use on a wide variety of materials

Parabolic flute design offers enhanced chip removal, coolant flow to the drill point and heat dissipation Short-length drill bits, also called stub length, provide better rigidity and increased strength 135-degree radius, split-point, is self-centering, reduces walking, good for hard material and reduces pressure on cutting edges Uncoated (bright), economical and useful with a wide range of drilling materials High-speed steel (HSS), for use on a wide variety of materials

Parabolic flute design offers enhanced chip removal, coolant flow to the drill point, and heat dissipation Long-length (also called taper length) drill bits have longer flutes and overall lengths than jobber drill bits, for deeper holes 135-degree radius split-point is self-centering, reduces walking, good for hard material, and reduces pressure on cutting edges Uncoated (bright) finish, economical and useful with a wide range of drilling materials High-speed steel (HSS), for use on a wide variety...

General-purpose geometry for drilling in Manufactured from premium high-speed steel Taper shank made to American National Standard (Morse) dimensions for use in corresponding Morse taper holders Black oxide finish for increased wear resistance and added lubricity standard from stock

Larger size general-purpose drills with 1/2" reduced shank Features 6" overall length and 3 1/8" flute length for increased rigidity, less deflection, and better hole accuracy Black oxide finish for increased wear resistance and added lubricity standard from stock Increased rigidity is ideal for portable drilling Standardized lengths result in minimal adjustment during tool changes in screw machines and machining centers