239 results for "10-input by 1-output Programmable Switcher, Rack Mount Option" between $75.00 and $2,000.00

Atlona 10 Input Scaler and Switcher with a Single HDMI Output The Atlona 10 Input Scaler and Switcher with a Single HDMI Output allows four HDMI or DVI, three VGA, one component, one S-Video and one composite video input to be scaled to a single HDMI output. The on screen display gives you the ability to change audio, scaling, and resolution options. With additional functions such as RS-232 and IR control the AT-LINE-PRO4 is easier than ever to control or integrate with a preexisting system. Multi...

The Powerware 9170+ is uniquely designed to meet these ever-changing customer needs. Built for a global audience, the 9170+ is a scalable, modular, flexible solution that combines the highest level of reliability. The 9170+ allows you to "build" a power solution specific to your needs, with an expandable level of redundancy.This PW9170+ rackmount enclosure uses a Configure To Order (CTO) Number that reflects the cabinet style, isolation requirements, input/output configurations, and branding options...

Cardioid Pattern Bi-color status indicator Logic input/output for remote LED and mute control dependant on base option Programmable mute switch (desktop models only) Includes surface mount preamp

* Pure sine wave AC output powers telecom equipment without performance degradation. * Continuous duty rated – full output wattage maintained even during extended power outages. * 1000 VA and 2000 VA models available – easily cascaded for N+1 redundancy, providing maximum reliability. * Low EMI and RFI interference characteristics. * User-friendly Status and Diagnostic LCD/LED displays. * Utility bypass function with fast load transfer switch. * Remote Power Management optional via RS-232 port...

Super cardioid Pattern Bi-color status indicator Logic input/output for remote LED and mute control dependant on base option Programmable mute switch (desktop models only) Includes surface mount preamp

On-stage line output signal AB redirector. Toggle switch for one-push operation. Pads allow using devices with different signal levels. Ground lift to eliminate buzz caused by ground loops. Heavy-duty construction, switches and components.

Altronix R2416300UL AC rack mount CCTV power supply provides 24VAC or 28VAC distributed via sixteen (16) fuse protected outputs for powering CCTV cameras, heaters, and other video accessories. Input 115VAC, 50/60Hz, 3 amp. 24VAC @ 12.5 amp (300VA) or 28VAC @ 10.0 amp (280VA) supply current. Sixteen (16) fuse protected outputs. Outputs are rated @ 3.5 amp. Illuminated power disconnect circuit breaker with manual reset. Individual power LEDs. Removable terminal blocks w/locking screw flanges. 3-wire...

The American Power Conversion (APC) Metered Rack Power Distribution Unit (PDU) distributes power to devices in the rack. It has a sensor that measures the current used by the PDU and its attached devices. It can be monitored through Web, Telnet, SNMP, SSH, or InfraStruXure Manager interfaces.

Available in 4 - 20 mA DC output conf, 24 VDC powered, DIN rail or panel mount Use with external current transformers Highest precision available Connection diagram printed on case Applications- quickly varying motor loads, chopped wave form drivers, harmonic currents, phase fired controlled heaters

The FDABS-10 is a Coax or UTP input, ground loop blocking, high performance amplifier board with 1 UTP and 1 Coax output that plugs into the DA-2160 system. The FDABS-10 has a gain adjust to compensate for signal level loss. The differential input amplifier is used to minimize or eliminate ground loop problems. The active UTP output can drive either active or passive recievers. This board is designed to tap off of an existing UTP system with a Coax feed for a DVR or monitor with BNC inputs.

Available in 4 - 20 mADC output conf, three element - .26" window 24 VDC powered, use with external current transformers Highest precision available, connection diagram printed on case DIN rail or panel mount Applications: quickly varying motor loads, chopped wave form drivers, harmonic currents, phase fired controlled heaters

Scaling any incoming inputs such as Composite Video, S-Video, Component Video, VGA, HDMI/DVI to a single HDMI output and the native resolution of the display: VGA~WUXGA or 480p~1080p. Digital and analog switching capabilities with HDMI output. RS232 commands available to be used with a 3rd party control systems. Digital coaxial output is perfect when the output source is a projector so that the audio can be sent to a separate AV receiver. PAL to NTSC and NTSC to PAL conversion 50/60Hz. IR codes...

Available in 0 - 10 VDC outputs, 24 VDC powered, 35mm DIN rail or panel mount Use with external current transformers Highest precision available Connection diagram printed on case Applications: quickly varying motor loads, chopped wave form drivers, harmonic currents and phase fired controlled heaters

Non-contact DC current sensing Closed loop sensing for accuracy 4 - 20 mA outputs Connection diagram printed on case 35 DIN rail or panel mount

35mm DIN rail or panel mount, available with analog 4 - 20 mADC outputs Use with external current transformers, 24 Vdc powered Highest precision available Connection diagram printed on case Applications: directly connect to PLC, sense motor stalls and short circuits, industrial instrumentation, process control loops, phase fired controlled heaters

Available with analog 0-5 Vdc outputs, 35mm DIN rail or panel mount Use with external current transformers, 24 VDC powered Highest precision available Connection diagram printed on case Applications- directly connect to PLC, sense motor stalls and short circuits, industrial instrumentation, process control loops, phase fired controlled heaters