332 results for "10in miter saw" between $50.00 and $700.00

10in Double Bevel Sliding Compound Miter Saw, Exclusive Bevel Detent System- 7 Positive Stops Delivers Fast Accurate Repeatable Cuts, Adjustable Stainless Steel Miter, Detent Plate With 11 Positive Stops Improves Productivity & Ensures Cutting Accuracy, Optimizes Cutting Accuracy, Machined Base Fence Support Maintains Fence, Perpendicularity With Blade For Cutting Accuracy Dual Horizontal Steel Rails With Linear Ball Bearing Consistent Accurate Cuts, Exclusive Cross Cut Stop Positions Cutting Head...

10in. x 5/8in. 60T TCT Saw Blade. Vertical Vise. Dust Bag. Triangular Rule. Socket Wrench 13. Hex Wrench LCT200W. 2 Lithium-Ion 1.5Ah batteries (BL1815). 15-minute Rapid Charger (DC18RA). Contractor bag (831274-0). 18V Compact Li-Ion 1/2 in. Driver-Drill BDF452HW (may include LXFD01CW Driver-Drill). 18V Compact Li-Ion Impact Driver BTD142HW.

A perfect tool for trim carpenters framers and woodworkers this miter saw makes smooth accurate miters and crosscuts for a variety of projects like crown molding and trim. Positive miter stops allow you to select preset points at specific angles while the dust bag keeps internal parts dirt free. 4800 RPM/15amp motorCutting capacity approx. 23/4" x 6"10" diameter blade9 positive miter stopsLaser guideHorizontal clamping systemLeft/right lock off switchIntegrated carry handle and dust bagAssembly required...

10" double-bevel sliding compound miter saw. Exclusive bevel detent system-7 positive stops. Adjustable stainless steel miter detent plate-. with 11 positive stops improves productivity. Machined base fence support maintains fence-. perpendicular with blade for cutting accuracy. Dual horizontal steel rails w/linear ball bearing. Exclusive cross cut stop positions cutting head. 10" - 5/8" Arbor Blade.

Powerful 1 950W maximum output and 1 520W power input motor. Large table for increased material stability. Thumb actuated positive stops 0° 15° 22.5° 31.6° and 45° right and left for quick and easy miter adjustments. Adjustable pivot fence for supporting large stock. Dust guide to prevent chips from scattering. Soft and vibration-reducing grip. Spindle lock for easy blade replacement. Laser guide system for easier alignment with the ink line. 10 . Length: 17.6. Width: 19.4. Height: 22.8

Nice saw, didn't need the bells and whistles. Good power, does what it needs to. Looked like a new saw when it arrived, hardly a scratch on it for being a reconditioned unit.

Just return the power tool, properly packaged and postage prepaid to a Ryobi Authorized Service Center. You can obtain the location of the Service Center nearest to you by contacting a customer service representative at 800-860-4050 or on-line through our Service Center locater at www.ryobitools.com. When you request warranty service, you must also present proof of purchase documentation (sales receipt/bill of sale). We will repair any faulty workmanship, and either repair or replace any defective...

Product Description The Incra Miter 5000 Miter Sled provides a renewable right panel which provides zero-clearance tear-out control and cut-off support on both sides of the blade. Two aluminum T-tracks are embedded in the MDF panel top to secure an included work piece hold-down clamp and to provide absolute rigid support for the 36in to 64in telescoping IncraLOCK Cut-off Fence. Will crosscut a 25in wide board with full control on a standard 10in table saw. The Miter 5000 by INCRA delivers perfect...

Thin kerf for fast cuts. Construction micro grain carbide teeth for longer life. Fully hardened plate runs truer longer. #400 grit diamond ground teeth for faster cleaner cuts. Precision tensioned and balanced plate for an accurate and true cut. Reinforced shoulder for added durability. 10? hook angle.095 kerf.63 arbor

* Blade Diameter: 10". * Arbor: 5/8". * Crown Moulding(nested): 6-5/8". * Baseboard(vertical): 4-3/4". * Maximum Cutting Capacity: 4-3/4" x 12" and 2-1/2" x 8-1/2". * Maximum Cutting Miter: 90° and 45°L/R. * No Load RPM: 3,200. * AMPS: 15.0. * Size(L x W x H): 28-1/8" x 25-1/4" x 26-1/2". * (1) 10" Dual Slide Compound Miter Saw w/ Laser. * (1) 10" Carbide Tipped Blade (60T). * (1) Vertical Vise. * (1) Socket Wrench #13. * (1) Hex Wrench. * (1) Dust Bag. * (1) Triangular Rule. * Innovative...

10in x 60 teeth x 5/8" arbor Tenryu Carbide Tipped, Miter Saw Blade ATAF , 5 degree rake,0.091 kerf 0.071 plate, Industrial Cabinet Shop Series.

Combined with the side bearings are carbide pads, the back of the blade rides on two load bearings mounted on a pivot shaft so both bearings the load equally

Largest crown molding cutting capacity in its class. Compact design with a patented 4 Steel Rail Sliding System further increases rigidity to produce superior cuts. Exclusive 6 linear ball bearings deliver smooth, solid, and adjustment-free, dead-on, accurate cuts. Increased capacity for up to 6-5/8in. crown molding,vertically nested, 4-3/4in. baseboard, and 12in. cross cuts at 90 degrees. Innovative direct drive gearbox and guard system is engineered for increased vertical cutting capacity....

Recently purchased this item with a 20% off coupon. Like the other reviews said, it takes about 20 minutes out of the box to fine tune it. But, that is no big deal because once it is set up it makes beautiful cuts. One review stated it does not immediatley stop rotating when you let off the button, that is no big deal because it stops within 5 seconds once you let off the button. Just practice safety and not grab your project while blade is turning. One minor defect in mine is the lockout button...

Features powerful 15 amp, 5,000 rpm motor. Stainless steel detent plate w/11 positive stops. Tall sliding fences support 4-1/2" crown molding. Machined base fence support - cam miter lock. Miter detent override for fine adjustment. 0-50 deg. L or R miter capacity, Bevels 3-48 deg. Capacity: 90 deg. 4x4"-45 deg. 2x4" cross cut. Laser compatible with DW7187 sold separately. Weight: 40.25 lb. UPC: 028877315362. Manufacturer Part No: DW713.

First, I am a Bosch fan. I love their tools as they are comfortable and very well made. This saw is no exception. I am remodeling my basement and using it for everything from framing to trim work. Saw has performed flawlessly thus far(I've had it since June). The dust collection system however is pityfull at best. I knew this when I bought it but it is such a nice saw I didn't care. You will have dust with any miter saw. This is a heavy piece, 65lbs, which is always a tradeoff for durability....