1515 results for "1000 watt amplifier" between $50.00 and $700.00

This two-channel rack-mountable amp's got power – 1000 watts! Each input takes RCA, XLR, or ¼” phono. Control each channel with an illuminated knob. A clipping LED reminds you to turn it down if your signal is distorted. Use in stereo, mono, or bridge mode for maximum output. Connect your speakers using the two Speakon inputs, or use the shock-free banana plugs on the back. The heavy duty fan with aluminum heat sink and protection circuit guards your equipment for optimum performance.Features: ...

BRAND NEW PRECISION POWER PC1000.1 1000 Watt MONO D Car Amplifier. RMS Power: 1000 Watt x 1 Channel @ 2 Ohm 1000 Watt x 4 Channel @ 1 Ohm. Class D MONOBLOCK. MOSFET. LED Power and Protect Mode Indicators. 3 Way System Protection Circuitry. Nickel Plated RCA Level Input. Variable Bass Boost (0 to +12 dB). Variable low-pass filter (50-200 Hz). Subsonic filter (15-50 Hz). Frequency Response: 15-200 Hz. Damping Factor: >2400. 4 Gauge Power and Ground Wiring is Required. Dimensions: 16"L...

Part of the iNUKE Series of power amplifiers the Behringer NU1000 iNUKE packs massive amounts of output power into exceptionally lightweight, rack-mountable package. Behringer's revolutionary high-density Class-D technology combined with ultra-efficient switch-mode power supplies ensures these feather-light powerhouses will drive your rig effortlessly for many years to come.

Specifications: 2 x 500 Watts Max Output1 x 1000 Watts BridgedDual Fully Adjustable Electronic CrossoverSoft Turn On/Off Circuit2 Ohm Stereo StableDual MOSFET PWM Power SuppliesVariable Gain ControlRemote Turn OnHeavy Duty Aluminum Alloy Heat SinkHi/Lo Level Molex InputPower & Protection L.E.D’sS/N Ratio: >95dBFrequency Response: 15-30KHzTHD: <0.04%Fully Protected CircuitryDimensions: 11.1''W x 2.2''H x 7.5''LFuse: 15A x 2No Remote Bass Boost ControllerUPC: 068888898737

Led Output Level Meters; Dual Output Level Controls; Heavy-duty Fan Cooling; Signal Led Indicator; Clip Circuitry With Led Indicator; Protection Circuitry With Led Indicator; Stereo/mono Selector; Rca Inputs; Binding Post Speaker Connections & Speakon® Outputs; Switched Ac Accessory Outlet; Thd: 1% At Rated Output Power; Freq Resp: 20 Hz–20 Khz; S/n Ratio: 102 Db; Input Level: +4db; 115v – 230v Selector; Dim: 4.3''h X 19''w X 13.6''d Model Number: ZPA100 Catalog Number: 171260 Item Title: Pyramid...

240 watts RMS at 4 ohms. 400 watts RMS at 2 ohms. 1000 watts dynamic power. 1000 watts dynamic power. Low-level RCA type inputs. Variable low-pass crossover. 12dB variable bass boost. PWM MOSFET power supply.

Scosche E1000 1000-watt car audio amplifier wiring kit package includes:

Product Description for the Hartke LH1000 Bass Amplifier Head The Hartke LH1000 has a classic 12AX7 Class-A tube front-end design with a solid-state output. Trick out the Treble and Bass Shelving to give the LH1000's warm tone a little edge, or use the brite and limiter switches to further sculpt your sound. The Hartke LH1000's intuitive front panel design also makes adjustments on the fly a breeze. Although the LH1000 is a perfect complement to Hartke's HyDrive cabinets, it also works as a seamless...

Audiopipe AP1004 1000 Watt 4 Channel Amplifier. Built-in Variable High Pass & Low Pass Crossover. RCA Line Input/Output Jacks. Electronic Protection Circuitry to Protect The Amplifier from Short Circuit, DC Offset & Thermal Overload. Remote Sub-Woofer Volume Control. 55 mm(H) x 176mm(V) x 333mm(L). 2.2 inches(H) x 6.9 inches(W) x 13.1 inches(L). Frequency Response: 20Hz ? 20kHz. Signal to Noise Ratio: 95dB. Channel Separation: >65dB. Total Harmonic Distortion: <0.05%. Speaker Impedance...

My friend has this amp, and its almost new, and will cut out if its wired for 2 ohms above half volume. All amps need to be able to handle a 2 ohm load. Dissapointed in that, because its a clean sounding amp. Also only 300 RMS, which is useless for most subs exept [@] stuff. Kenwood is a good namebrand and needs to live up to it better. You Can get a Very very nice Hifonics amp for less than 200 thats 1 ohm stable and produces the advertised RMS, they dont BS you with max numbers which mean nothing...

Dual XLR / 1/4'' combo and RCA inputs. A/B speaker selector. 1/4'' and binding post speaker connections. Dual output level controls. Dual illuminated voltage meter. Clip circuitry with LED indicator. Frequency response: 10Hz-50kHz. 110V/220V voltage selector. 19" W x 5 1/8" H x 13" D.

Grow Your Passion! Output power: 1000W @ 4 ohms; 1400W @ 2 ohms Front mounted two low pass filters and two gain controls Advanced performance 3rd generation circuitry design High continuous current output from robust toroidal transformer Switchable input peak limiter and selectable high pass filter (30Hz, 50Hz) to reduce distortion and protect Speakers Bridge mono and parallel mode LEDs Fast Recovery design for lower distortion if clipping occurs Very rugged housing Active balanced inputs for low...

Features: 1000 watts peak power 450 watts @ 2 ohms 360 watts @ 4 ohms 200 watts @ 8 ohms Inputs: RCA (4 audio sources) 1 RCA dedicated for record line output Two Microphones Input Jacks Master Volume Controls w/Blue LED Heavy Duty Fan Cooling A/B Speaker Selector Removable rack-mount brackets 3U Height w/ Remote110-220V Switchable Dimensions: 19(W) x 5.1(H) x 12.1(D) Weight: 14.3 lbs (6.5 kg)

Safe. Simple to Set Up. Looks Good. Sturdy. Quality Construction.

Pyramid is a car audio company that offers affordable alternatives to some of the pricier brands on the market. A family owned business based in Brooklyn, NY Pyramid offers person to person customer service that is becoming increasingly harder to find in the world of outsourcing and call centers. With two decades of industry experience they have a large catalogue to choose from with audio and electrical components including power supplies, amplifiers, crossovers, speakers, capacitors, subwoofers...

Input Gain (dB). Power LEDs. Signal Activity LEDs (Signal). Overload LEDs (Clip). Fault LEDs (Fault). Power Switch. Channel 1 & 2 Level LED Indicator. Cannon and Input Jack Connector. Mode Switch. Ground Lift Switch. Binding Post Outputs. Power Select 110.

Two Channels A/B- Bridgeable. Inputs: Electronic Balanced; Barrier Strip ,XLR,TRS 1/4''. Speaker Terminal: Speakons for Ch A, Ch B and Bridge; Binding post. Cooling Fan Two-speed DC fan, air Flow back to front. 110/220 Volt Switchable. 2x5 LED Indicator Red ,DDT / Clipping; Yellow, signal; Green ,power. Overload and Protection Indicator. Signal/Noise ratio: =102dB. Distortion: =1.0%. Frequency response: 20Hz-20 KHz >±0.5dB. input impedance: balance 20Khz. Input level:+4dB. Total Power...