672 results for "10 inch miter saws" between $50.00 and $1,500.00

10" 80-Tooth Ultra-Fine Crosscutting Blade for Table/Miter Saws - CB1080

Convert your miter saw into a precision laser-guided power tool! Simple to install, just replace the saw's outside blade washer with the self-aligning Laser Guide. The guide projects a clear line just to the left of the cut, and turns on and off automatically at 400RPM. No more "sneaking up" on a mark, just cut on the line. Will not fit Bosch, Rigid, ProTech, or DeWalt model 704 or 705 saws. Includes: Laser guide and batteries. Three different installation bolts to cover most applications. ...

Blade Diam = 10 in. Arbor Diam = 5/8 in. Speed = 4700 rpm [Max]. Cutting Cap. 2 = Miter/Bevel, 0°/0° - 3-1/2"h x 12"w, Miter/Bevel, 0°/45° - 2-1/4"h x 12"w, Miter/Bevel, 45°/0° - 3-19/32"h x 8"w, Miter/Bevel, 45°/45° - 2-1/4"h x 8"w. Amps = 13.00 A. Power Cap. = 2 4/5 hp. Voltage = 120.00 V. Control Type = Up-Front. Height = 20.630 in. Width = 35.930 in. Includes = 60 Tooth Carbide-Tip Blade, Tool Free Workpiece Clamp, Blade & Stop Wrench, Dust Bag. Weight = 54 lb.

The Delta Biesemeyer 79-806 Table System for Miter Saws - 6-Foot by 10-Inch Table.

Due to the ever increasing popularity of the 10�?� Trim Master Blade, Alpha� has expanded its line of blades for Miter Saws. The new 12�?� diameter blade for Miter Saws is designed to be used on a standard Miter Saws without sliding capabilities. This specialty blade is ideally suited to cut baseboards, backsplashes, end caps, mirror frames and many other molding applications. This blade is a must have item for all countertop installers!

* Produce tight, perfectly cut miter joints with no bottom splinters. * Specially designed for sliding compound miter saws and radial saws. * Made with double-hard C-4 Submicron Carbide for up to 300% longer life. * Heavy steel plate maintains maximum stability for the best cut. * -5º face hook also adds to optimum rigidity when cutting. * Each blade is hand-straightened to a run out of .001/.002 for maximum cut quality.

Product Description Kalamazoo Saw angles from 0° to 45° either way. Cutting capacity of 1-1/2" for solid stock and 2-1/2" for shapes at 45°. Positive index stops up & down stops 2 cam-lock vises 110/220V, 3 HP, 1 phase. Blade 10" dia., 5/8" arbor. Speed 3,450 rpm. Cutting capacity @ 90°: 2" round, 3-1/4" square. Cutting capacity @ 45°: 1-1/2" round, 2-1/2" square. Tool size 25"L x 24"W x 17"H. Tool weight 220 lbs.Includes 2 vises & lever lock for table. Cut-off wheel sold separately.Please specify...

Product Description Kalamazoo Saw angles from 0° to 45° either way. Cutting capacity of 1-1/2" for solid stock and 2-1/2" for shapes at 45°. Positive index stops up & down stops 2 cam-lock vises 220/440V, 3 HP, 3 phase. Blade 10" dia., 5/8" arbor. Speed 3,450 rpm. Cutting capacity @ 90°: 2" round, 3-1/4" square. Cutting capacity @ 45°: 1-1/2" round, 2-1/2" square. Tool size 25"L x 24"W x 17"H. Tool weight 220 lbs.Includes 2 vises & lever lock for table. Cut-off wheel sold separately.Please specify...

15 Amp motor, intense power for the toughest cutting jobs. 0-52 degree miter angle range, to the right and left for increased flexibility. 0-48 degree bevel range, to the left with adjustable bevel stops for precision cuts. Horizontal handle with soft, vibration reducing Elastomer grip adds comfort and control. Large extended flip fence, raises to 4" for cutting crown molding vertically. Large table, provides better material support. Thumb actuated positive stops, easy to use for quick miter...

Lightweight, feature-filled stand is ideal for your 10in. miter saw, providing up to 108in. of material support. Wrench Included: No, Dust Bag Included: No, Dimensions L x W x H (in.): Variable...

This is a great accurate saw. Although it's not a slider, its very rigid and thus can make very accurate cuts. I'd been testing saws for some time to insure that I got one that had little side to side deflection since I think that's the sign of a good saw. The cheap ones are really flimsy, and sliders tend to flex too. But this baby holds a cut making tight miters. So if you can live with cutting 4x4 or 2x6 you'll like this saw. For that purpose it rates 5 stars. (I gave it 4 since a 2-3x cost slider...

NO WARRANTY, ORAL OR WRITTEN, EXPRESSED OR IMPLIED, OTHER THAN THE ABOVE WARRANTY IS MADE WITH REGARD TO THIS HITACHI PRODUCT. HITACHI DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE OR PURPOSE, AND ALL OTHER WARRANTIES. IN NO EVENT SHALL HITACHI BE LIABLE FOR ANY INCIDENTAL, SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES, OR FOR ANY COSTS, ATTORNEY FEES, EXPENSES, LOSSES OR DELAYS ALLEGED TO BE AS A CONSEQUENCE OF ANY DAMAGE TO, FAILURE OF, OR DEFECT IN ANY PRUDUCT...

Bosch BA162 Extension & Stock Stop for 10" Compound Miter Saw

Robert Bosch Tool Corporation ("Seller") warrants to the original purchaser only, that all Skil portable and benchtop power tools will be free from defects in material or workmanship for a period of one year from date of purchase. SELLER'S SOLE OBLIGATION AND YOUR EXCLUSIVE REMEDY under this Limited Warranty and, to the extent permitted by law, any warranty or condition implied by law, shall be the repair or replacement of parts, without charge, which are defective in material or workmanship and...

Miter saw. 15 amp. 4800 RPM. Laser guide. Left and right lock off switch. 9 positive miter stops. Horizontal clamping system. Integrated carry handle. Dust bag. Length: 21.25. Width: 16. Height: 15

0° (Right angle): 3 1/2" X 3-31/32". 0° (Right angle): 3 1/2" X 3-31/32". Miter right/left 45° : 2-5/16" X 4". Bevel left 45° : 1-5/8 X 5-21/32". Miter right/left 45° + Bevel left 45° : 1-5/8" X 4". Miter cutting ranges: Right 0° - 52° / Left 0° - 52°. Bevel cutting ranges: Left 0° - 45°. Motor voltage / Current: 120V / 15A. No-load speed: 5,000. Laser marker: Yes. Soft grip: Yes. Sub-fence: Pivoting type. Wide: 17-23/32". Length: 23-5/8". Height: 22-3/64". Weight: 23.8 lb.

Dual rubber-grip carrying handles allow for convenient portability. Lightweight die cast aluminum design for easy transport. Versatile base can mount to a stand or work bench. Heavy Duty 15 Amp motor for various cutting applications. Die cast aluminum table for long-lasting durability. Hold-down clamp tightens securely to the work piece to ensure an accurate cut. Oversized, ergonomic knobs provide ease of use and maximum control. Innovative Green XACTA LaserTM provides high visibility for...

One-Year Limited Warranty. DEWALT will repair, without charge, any defects due to faulty materials or workmanship for one year from the date of purchase. This warranty does not cover part failure due to normal wear or tool abuse. For further detail of warranty coverage and warranty repair information, visit www.dewalt.com or call 1-800-4-DEWALT (1-800-433-9258). This warranty does not apply to accessories or damage caused where repairs have been made or attempted by others. This warranty...