|
10 Go Kart Bearing 1 inch Ball Bearings
Ball Bearings 1" x 2" x 3/8" Lot of 10 Bearings High Quality 10 inch size Ball Bearings, the inner diameter is 1", outer diameter is 2" and the width is 3/8", this is a popular size that could be used in many applications, Bearings are made of Chrome Steel each bearing are rubber sealed from both sides to protect the bearing from dust or any possible contamination, also bearings are pre-lubricated with grease, Bearings are packed 10 bearings in one plastic tube... 
|
$24.95
|
Top stores
VXB Bearings
$24.95
|
|
10 Go Kart Bearing 1" inch Ball Bearings
Item: Double Shielded Ball Bearings. Size: 1" x 2" x 3/8". Type: Deep groove ball bearings. Shields: 2 Rubber Seal. Lubrication: Self Lubricated (Grease). Quantity: 10 Pcs.
|
$24.95
|
Top stores
VXB Bearings
$24.95
|
|
Go Kart & Mini Bike 1" Flange Bearing
205-16 Go Kart 1" Flange Bearing. 1" flange bearing has 2 mounting holes 7/16" in dia. The holes are 3-7/8" apart center to center. Also used on mini bike axles.
|
$9.95
quickieparts.com
|
Top stores
quickieparts.com
$9.95
|
|
GO-KART PARTS Heavy Duty Wheel Bearings - Perfect for Go-Kart Wheels! 1-3/8" OD, 5/8" ID, 7/16" HT with c-clip retainer ring
|
$4.99
becoparts.com
|
Top stores
becoparts.com
$4.99
|
|
Go Kart & Mini Bike Bearing Hanger Bracket
Go Kart Bearing Hanger Bracket 4115. 1/4" steel plate bearing hanger for 1" standard go kart axles. Use with our 3 bolt flangette set. Also used on mini bike axles.
|
$5.95
quickieparts.com
|
Top stores
quickieparts.com
$5.95
|
|
326 Go Kart & Mini Bike Wheel Bearing
326 Go Kart Wheel Bearing. Also used on mini bike wheels.
|
$1.95
quickieparts.com
|
Top stores
quickieparts.com
$1.95
|
|
AZ8127 Go Kart & Mini Bike Bearing Hanger Bracket
AZ8127 Go Kart Bearing Hanger Bracket. 1/4" steel plate bearing hanger for 1" standard go kart axles with our 2 or 3 hole Flangette Sets. Also used on mini bike axles.
|
$4.50
quickieparts.com
|
Top stores
quickieparts.com
$4.50
|
|
Go Kart & Mini Bike 206170A Comet SCS 400 Series #40/41, 1" Bore, 10 teeth Clutch
Comet SCS 400 series clutch is durable. With heavy duty needle bearings. Designed and built for direct drive mini-bikes and go-karts, one of the most rugged applications ever required of a modestly-priced automatic centrifugal go kart clutch. Having extra ability for rough service. For up to 8 horsepower 4 cycle engines. Approximate engagement of 2000 rpm. Note: Clutch only slips onto the crankshaft 1 inch, must have bolt to screw into crankshaft to hold clutch on. Clutch is not warranteed.
|
$89.95
quickieparts.com
|
Top stores
quickieparts.com
$89.95
|
|
UCFA202-10 Flange Cartridge Bearing Unit 5/8 Bore Mounted Bearings
UCFA202-10 Flange Cartridge Unit 5/8" Inner Diameter UCFA202-10 Flange Cartridge Unit, the inner Diameter is 5/8" inch. * Item: UCFA202-10 Bearing * Type: Flange Cartridge Unit * Basic Load (Cr): 12.8 KN * Basic Load (Cor): 6.65 KN * Bolt Size: 5/16" * Bearing No: UC202-10 * Housing No: FA204 * Quantity: One bearing Dimensions (Inches) a e i g S S1 S2 b f z Bi n 4-1...
|
$9.95
|
Top stores
VXB Bearings
$9.95
|
|
Timberline 240-10 Carbide Tipped Roman Ogee 5/32 Radius x 1 Inch Dia x 15/32 Cut Height x 1/4 Shank w/ Lower Ball Bearing Router Bit
Roman Ogee Router Bits
|
$20.72
|
Top stores
Toolstoday.com
$20.72
|
|
UCFB202-10 Bearing 5/8 inchThree bolt Flanged Mounted Bearings
UCFB202-10 Three bolt Flanged Mounted Bearing 5/8" inch Inner Diameter UCFB202-10 Three bolt Flanged Mounted Bearing, Inner Diameter is 5/8" inch. * Item: UCFB202-10 Bearing * Type: Flanged Mounted Bearing * Shaft Diameter: 5/8" inch * Bolt Size: M8 * Bearing No: UC202 * Housing No: FB204 * Basic Load (Cr): 14 KN * Basic Load (Cor): 7.85 KN * Quantity: One Bearing Dimensions (mm) a h e j i g I b...
|
$12.77
|
Top stores
VXB Bearings
$12.77
|
|
FYH Bearing UCP202-10 5/8 Pillow Block Mounted Bearings
UCP202-10 FYH Bearing Pillow Block Bearing Cylindrical bore (with set screws) 5/8" Inner Diameter Bearing This is the most common type of mounted ball unit. The rib at the bottom of the housing mounting section provides for a robust unit that can withstand great loads from any direction. it is used for applications with severe loading and shock load conditions. Tapered-bore style units are offered individually and adapters are sold separately...
|
$16.62
|
Top stores
VXB Bearings
$16.62
|
|
FYH Bearing UCPA202-10 5/8 Pillow Block Mounted Bearings
UCPA202-10 FYH Bearing Pillow Block Bearing Cylindrical bore (with set screws) 5/8" Inner Diameter Bearing This pillow type unit is designed to reduce mounting space, it is installed for machines with the two tapped holes on the bottom of the housing.Applications are Conveyors and areas with limited mounting space * Item: UCPA202-10 Bearing * Type: Tapped-base pillow units * Basic Load (Cr): 12.8 KN * Basic Load (Cor): 6.65 KN * Bearing...
|
$19.11
|
Top stores
VXB Bearings
$19.11
|
|
5/8 Bearing UCFL202-10 + 2 Bolts Flanged Cast Housing Mounted Bearings
UCFL202-10 5/8" Mounted Bearing One Bearing 5/8" Mounted Bearing UCFL202-10, the inner diameter is 5/8". * Item: UCFL202-10 Bearing * Type: Mounted Bearings * Bolt Size: M10 * Basic Load (Cr): 12.8 KN * Basic Load (Cor): 6.65 KN * Bearing No: UC202-10 * Quantity: One bearing Dimensions (Inches) d H L A J N A1 A2 A0 B S 5/8" 4-7/16" 2-3/8" 1" 3-35/64" 15/32" 7/16" 19/32" 1...
|
$6.99
|
Top stores
VXB Bearings
$6.99
|
|
Azusa Go Kart Kit with 6" Aluminum Wheels (AZ3552)
Go Kart Kit with Easy to Follow Instructions No Welding Required, Use basic toolsKit Includes: Kart Frame with Steering Hoop Front and Rear 6" Aluminum Tristar Wheels with 15x6-6 Knobby Tires Front Spindles Pedals Seat with Hardware & Pad Steering Wheel Steering Shaft and Hub #35 72T Sprocket with Hub #35 Chain with Master Link 6" Internal Expanding Drum Brake Tie Rod Kits Throttle Assembly Brake Rod Kit Live Axle Rear Bearing Kits Engine Kill SwitchEngine and Clutch NOT INCLUDEDFrame Specs: Jig...
|
$605.95
bmikarts.com
|
Top stores
bmikarts.com
$605.95
|
|
1-1/4" x 1-3/4" Tapered Axle Wheel Bearing Kit #BK-10
Martin Wheel bearing kit, for 1-1/4" x 1-3/4" spindles, contain enough components to repair one complete hub including both inner and outer bearing. Kit includes: 2 bearings (LM67048 & 25580), 2 races (LM67010 & 25520), 1 Single Lip 2.125" Grease Seal, & 2.32" Dust Cap.
|
$19.95
|
Top stores
easternmarine.com
$19.95
|
|
Azusa Go Kart Kit with 5" Aluminum Wheels (AZ3551)
Go Kart Kit with Easy to Follow Instructions No Welding Required, Use basic toolsKit Includes: Kart Frame with Steering Hoop Front and Rear 5" Aluminum Mag Style Wheels with 11.7" Tires Front Spindles Pedals Seat with Hardware Steering Wheel Steering Shaft and Hub #35, 72T Sprocket with Hub #35 Chain 6" Internal Expanding Drum Brakes Tie Rod Kits Throttle Assembly Brake Rod Kit Live Axle Rear Bearing Kits Engine Kill SwitchEngine and Clutch NOT INCLUDEDFrame Specs: Jig Welded and made of 1" OD x...
|
$514.95
bmikarts.com
|
Top stores
bmikarts.com
$514.95
|
|
Go Kart & Mini Bike 206169A Comet SCS 400 Series #35, 1" Bore, 12 teeth Clutch
Comet SCS 400 series clutch is durable. With heavy duty needle bearings. Designed and built for direct drive mini-bikes and go-karts, one of the most rugged applications ever required of a modestly-priced automatic centrifugal go kart clutch. Having extra ability for rough service. For up to 8 horsepower 4 cycle engines. Approximate engagement of 2000 rpm. Note: Clutch only slips onto the crankshaft 1 inch, must have bolt to screw into crankshaft to hold clutch on. Clutch is not warranteed.
|
$89.95
quickieparts.com
|
Top stores
quickieparts.com
$89.95
|
|
Azusa Go Kart Kit with 5" Nylon Wheels (AZ3557)
Go Kart Kit with Easy to Follow Instructions No Welding Required, Use basic toolsKit Includes: Kart Frame with Steering Hoop Front and Rear 5" Nylon Tristar Wheels with 11.6" Knobby Tires Front Spindles Pedals Seat with Hardware & Pad Steering Wheel Steering Shaft and Hub #35 72T Sprocket with Hub #35 Chain with Master Link 6" Internal Expanding Drum Brake Tie Rod Kits Throttle Assembly Brake Rod Kit Live Axle Rear Bearing Kits Engine Kill SwitchEngine and Clutch NOT INCLUDEDFrame Specs: Jig Welded...
|
$499.95
bmikarts.com
|
Top stores
bmikarts.com
$499.95
|
|
FYH Bearing UCT202-10 5/8 Take Up Mounted Bearings
UCT202-10 FYH Bearing Take Up Mounted Bearing Cylindrical bore (with set screws) 5/8" Inner Diameter The take-up unit fits into a take-up frame and allows for linear adjustment along the plane of the unit. Both international and domestic slot versions are available.Applications is Belt conveyor, bearing is used where the shaft distance must be adjusted. * Item: UCT202-10 Bearing * Type: Take Up Mounted Bearing * Basic Load (Cr): ...
|
$19.11
|
Top stores
VXB Bearings
$19.11
|
|
Go Kart & Mini Bike Rolling Hub 4 Bolt on a 4" Bolt Circle
Go Kart Rolling Axle Hub 4 Bolt on a 4" Bolt Circle. Heavy duty go kart wheel hubs are used to mount the front wheels on a go kart, all terrain kart or mini bike. The hub length is 3-5/8". and fits a 3/4" diameter go kart spindle. They have 4 bolts 1/2" in diameter 1-1/4" long on a 4" bolt circle. Lug nuts and tapered bearing are included. Also used on mini bike axles.
|
$39.95
quickieparts.com
|
Top stores
quickieparts.com
$39.95
|
|
FYH Bearing SBPF202-10 5/8 Stamped steel round three bolt Flanged Moun
SBPF202-10 FYH Bearing Stamped steel plate round three-bolt flange type Bearing Cylindrical bore (with set screws) 5/8" Inner Diameter Bearing Stamped steel plate round three-bolt flange type units Cylindrical bore (with set screw locking). * Item: SBPF202-10 Bearing * Type: Stamped steel plate round three-bolt flange type units * Bolt Size: 1/4" * Basic Load (Cr): 9.55 KN * Basic Load (Cor): 4.8 KN * Bearing No: SB202-10 ...
|
$11.72
|
Top stores
VXB Bearings
$11.72
|
|
FYH Bearing SBPFL202-10 5/8 Stamped steel oval two bolt Flanged Mounte
SBPFL202-10 FYH Bearing Stamped steel plate oval two bolt Flanged Bearing Cylindrical bore (with set screws) 5/8" Inner Diameter Bearing Stamped steel plate oval two-bolt flange type units Cylindrical bore (with set screw locking). * Item: SBPFL202-10 Bearing * Type: Stamped steel plate oval two-bolt flange units * Bolt Size: 1/4" * Basic Load (Cr): 9.55 KN * Basic Load (Cor): 4.8 KN * Bearing No: SB202-10 * Quantity...
|
$11.72
|
Top stores
VXB Bearings
$11.72
|
|
SBPP202-10 5/8 Pressed Steel Bearing Unit 2-Bolt Flanges Mounted Beari
SBPP202-10 Pressed Steel Housing Unit 2-Bolt Flanges 5/8" Inner Diameter Bearing SBPP202-10 Pressed Steel Housing Unit, bearing is 2-Bolt Flanges, Inner Diameter Bearing is 5/8". * Item: SBPP202-10 Bearing * Type: Pressed Steel Housing Unit * Bolt Size: 5/16" * Basic Load (Cr): 9.55 KN * Basic Load (Cor): 4.8 KN * Bearing No: SB202-10 * Housing No: PP203 * Quantity: One bearing Dimensions (Inches...
|
$7.77
|
Top stores
VXB Bearings
$7.77
|
|
UCF202-10 FYH Square Flanged Bearing 5/8 Inner diameter Mounted Bearin
UCF202-10 FYH Bearing Square Flanged Mounted Bearing Cylindrical bore (with set screws) 5/8" Inner Diameter Bearing This heavy duty four-bolt flange unit has a round cartridge on the backside of the flange which allows for precise mounting and alignment.Applications are Rotating drum, rotating roller and when precise mounting accuracy is required * Item: UCF202-10 Bearing * Type: Four Bolt Flanged Bearing * Bolt Size: 3/8" *...
|
$16.62
|
Top stores
VXB Bearings
$16.62
|
|
UCFA202-10 FYH Adjustable oval two-bolt Flanged Bearing 5/8 inner Diam
UCFA202-10 FYH Bearing Adjustable oval two-bolt Flanged Bearing Cylindrical bore (with set screws) 5/8" Inner Diameter Bearing This oval flange type unit allows for anglular adjustment with a supporting point as the shaft center.when the bearing unit is installed, the bearing works fine adjustment of the supporting location for the shaft center is enabled. Since the bolthole center of this unit is the same as that of the diagonal bolthole...
|
$21.03
|
Top stores
VXB Bearings
$21.03
|
|
|
Large Load Bearing Surface 5/16 X 1 1/4 PLASTER WASHER ZINC - PW 10
|
$521,100.00
phoenixfastener.com
|
Top stores
phoenixfastener.com
$521,100.00
|
