27 results for "1/8'' x 3/8'' Countersink w/Brad Pt. Bit" between $5.00 and $75.00

1/8"" X 3/8"" Countersink W/brad Pt. Bit -- Tired of countersinks that slip on the drill bit after one or two holes? After tightening the set screw half a dozen times, the drill bit is usually so scarred up that there is no hope of any further adjustment. Make it Snappy countersinks are designed so that the countersink locks onto the hex shank, and the drill bit slides through the center. A set screw allows adjustment of the drill bit for different screw lengths. Because the drill drives the hex...

Get creative with your labels! "Deco Mode" feature lets you add up to 12 stylish patterns to labels you design. Create labels using one or two lines of crisp text, 15 sizes, nine type styles and 178 symbols.

Auger Bits - 18 Inch Long

Large 1/4 inch gold socket head screw - the drill bit will not slip. 3/8 inch or 1/2 inch diameter counterbore. Combination countersink and/or counterbore for standard wood plugs. Standard hex shank fits all power bit quick change chucks. Alloy steel and thru hardened for long life - can be resharpened. Drill bits are adjustable for different length screws. 82 countersink angle.

Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Primark Tool Group Description: Magna Power Ship Auger Bit > Size: 1-3/8" diameter X 7/16" shank X 17" Overall Length w/ 12" Twist Length, Steel Unused manufacturer item still in factory holder and with protective film on tip, Comes As Is and As Shown, see pictures Model # 47035MSRP: $68.95 Industry Recycles is much more than just another seller- we are one of the first companies to innovate the...

Snappy 3/16"" X 3/8"" Countersink W/standard Pt. Bit -- Tired of countersinks that slip on the drill bit after one or two holes? After tightening the set screw half a dozen times, the drill bit is usually so scarred up that there is no hope of any further adjustment. Make it Snappy countersinks are designed so that the countersink locks onto the hex shank, and the drill bit slides through the center. A set screw allows adjustment of the drill bit for different screw lengths. Because the drill drives...

TSC1/2-3/8 1/2"-3/8" HSS Threaded Shank Stop Countersinks

TSC3/8-1/4 3/8"-1/4" HSS Threaded Shank Stop Countersinks

WL Fuller 10393008 8 Set of 5 Type "C" Countersink & Drill Bit SetDescriptionThe Type “C” countersink is designed for use in all woods, plastics, and non- ferrous metals. The countersink is held in place with 2 hex socket set screws fastened into the flutes of the drill. This countersink can be mounted on taper point, brad point and regular point drills.

Auger Bits - 18 Inch Long

Have you noticed a lot of Clumpy Grass with Barren Spots in your yard with small barren patches in-between? Inspect the barren patches for a heavy buildup of mulched grass clippings and leaves. If you find this interwoven grass and leaves, you have "thatch", and it suffocates the grass where it gets too thick. To remove you can use a cheap long-fingered metal rake. Within a few hours you may rake-up enough "thatch" to fill the back of a small pick-up truck. If the rake is a bit too much work...

Snappy 5/64"" X 3/8"" Countersink W/standard Pt. Bit -- Tired of countersinks that slip on the drill bit after one or two holes? After tightening the set screw half a dozen times, the drill bit is usually so scarred up that there is no hope of any further adjustment. Make it Snappy countersinks are designed so that the countersink locks onto the hex shank, and the drill bit slides through the center. A set screw allows adjustment of the drill bit for different screw lengths. Because the drill drives...

Snappy 9/64"" X 3/8"" Countersink W/standard Pt. Bit -- Tired of countersinks that slip on the drill bit after one or two holes? After tightening the set screw half a dozen times, the drill bit is usually so scarred up that there is no hope of any further adjustment. Make it Snappy countersinks are designed so that the countersink locks onto the hex shank, and the drill bit slides through the center. A set screw allows adjustment of the drill bit for different screw lengths. Because the drill drives...