90 results for "1/4 in I.D. Black Heat Shrink Tubing 4 ft" between $1.00 and $50.00

Material Type: Thin Wall Cross-Linked Polyolefin. Shrink Ratio: 2:1. Inner Diameter: 0.250". Wall Thickness: 0.025". Length: 48". Color: Black. Shrink Temperature: 120°C. Operating Temperature: -55°C to 110°C. Tensile Strength: 2200 PSI. UL Recognized. Dielectric Strength: 600 Volts per mil. Fluid Resistance: Good to Excellent. Copper Corrosion: No Corrosion. Water Absorption: 0.2%. Flammability: Flame Retardant. Resistant to common fluids and solvents. Meets MIL-DTL-23053/5. Meets...

1/4 in I.D. Black Polyolefin Heat Shrink Tubing 4 ft MCM Part #: 95-025 | Ico-Rally Part #: 8505

Ancor Marine Adhesive Lined Heat Shrink Tubing (alt) Tubing, 1/4" X 12"l, Black (10 Qty/pk) . Ancor s adhesive lined tubing is superior to conventional heat shrink tubing. It s made from cross-linked polyolefin, which is much stronger than PVC. With a 3:1 shrink ratio, it can shrink up to one-third of original size. The waterproof adhesive is heat-activated. It bonds tenaciously to insulating covers and terminals, producing strain relief that makes a stronger connection than the mechanical connection...

Pro-power heat shrink tubing is made of cross linked thermally stabilized flame-retardant polyolefin making it useful for a variety of applications. Meets MILAMS-DTL-23053/5 Class 1 and 3 requirements.

Pro-power heat shrink tubing is made of cross linked thermally stabilized flame-retardant polyolefin making it useful for a variety of applications. Meets MILAMS-DTL-23053/5 Class 1 and 3 requirements.

Alpha ALPF2211/4-BK020 1/4 inch black heat shrink tubing on 40 foot roll. Irradiated Polyolefin MIL-DTL 23053/5C. 125c--600V. Priced and sold per 40 foot roll

HTR80-4 TMR 4' STICK BLACK HEAT SHRINK TUBING THIN WALL - 1/4" (STICK)

This is a pack of twenty four pieces of Novak Assorted 6" Heat Shrink Tubing. This heat shrink provides dependable, clean, protected connections. The heat shrink is available in 6 inch long increments, double the length of most heat shrink tubing available. The heat shrink comes in six sizes of four pieces each: 1/16”, 3/32”, 1/8”, 3/16”, 1/4" and 3/8” and has a 2:1 shrink ratio. It is also lead free and RoHS compliant.

SHRINKFLEX 1/4" (6mm) Heat Shrink Tubing by Techflex 2:1 Polyolefin single wall heatshrink tubing CSA rated and RoHS compliant. Part # H2N0.25BK Excellent for protecting and strengthening DIY projects, power cords, repair, etc.. 2:1 shrinks to 1/2 its original size. Sold by the foot.

3:1 shrink ratio. Continuous operating temperature range from -55 deg C to +110 deg C. Semi-flexible. Moisture sealing. Flame retardant. Offered in black only at this time. Applicable specifications AMS 3634 and MIL-I-23053/4-Class 3.

Marine Gradeª Adhesive Lined Heat Shrink Tubing (Alt)Insulates and protects connections from mechanical abuse, wire pullout and abrasion. Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief.

F P - 3 0 1 V W Tubing has an outstanding balance of electrical, physical and chemical properties. The tubing and is specially engineered for superior flame resistance. F P - 3 0 1 V W Tubing meets MILDTL-23053/5, Class 3 requirements. It is UL Recognized and CSACertified at 600 volts @ 125 Deg C.

Heat Shrink Tubing can be used to insulate, combine, consolidate, or organize cables. This tubing is halogen-free, flexible, flame retardant heat-shrinkable tubing. This tubing is free of Pb,Cd, Hg,Cr+6, PBB and PBDE.CB-HFT can be used in any enclosed area where a flame-retardant, halogen-free environment is required Shrink Temperature(°C) 90 Temperature Range(°C) -55 ~ 125 Priced and sold by the foot. The standard package is 100 feet. When you select a quantity larger than 100 feet, you wuill...

2:1 Shrink Ratio. Mil Spec. # MIL-DTL-23053/9. Flame retardant. Flammability Rating: UL VW-1, CSA OFT. Highly heat resistant. Continuous operating temperature: -67°F to 347°F ( -55°C to 175°C). Shrink ratio: 50% or moe in the radial direction, 5% or less in the axial direction. Excellent electrical properties. High resistance to chemicals and oils. Color: Clear. Also sold in Black, call for pricing and availabilty. Available in 4 foot Lengths and Spool Quantities.

Our heat shrink is a flexible polyolefin tubing that offers an outstanding balance of electrical, physical and chemical properties for a wide variety of industrial and military applications. Our tubing is typically used as shrink-fit electrical insulation over cable splices and terminations. It is also used for lightweight wire harness covering, wire marking, wire bundling, component packaging and fire resistant covering.

Available in lengths of 25,50, and 100 Feet. Choose from Black or Red. 1/4 inch Black Heat Shrink Tubing. Available in lengths of 25,50, and 100 Feet. Choose from Black or Red. Heat Shrink Tubing is placed over the connection to be protected and then heated with an oven, hot air gun or similar tool. Convenient but less effective methods for shrinking the tube include a soldering iron (held in close proximity, but not touching the tube) or the heat from a lighter. These processes cause the tubing...

Size: 0.25" Dia. x 7' (6.35 mm x 2.13 m). Brady material #: B-342. Color: Black on white. Material type: Polyolefin. Type/style of label: Sleeve. Material description: PermaSleeve® Heat-Shrink Polyolefin. Wire gauge: 16-8 gauge. Agency approvals: CSA accepted, MIL-STD-202, SAE-DTL-23053/5 Class 1, SAE-M-81531, and UL recognized. Special properties: Heat-shrinkable, self-extinguishing. Quantity/UOM: 1/each. Printer compatibility: BMP®21 Mobile Printer & ID PAL™. Application (s): Panel identification...