|
1/4" Short Lag Shield
Used for Anchoring Lag Screws in Concrete, Block, Brick, and Mortar Joints. For Testing Data Refer to www.simpsonanchors.com. 
|
$0.26
fastener-warehouse.com
|
Top stores
fastener-warehouse.com
$0.26
|
|
Crown Bolt 1/4 in. x 1 in. Zinc Alloy Short Lag Shields (25-Pack) 10398
Shop for Hardware & Fasteners at The Home Depot. These Crown Bolt 1/4 in. x 1 in. Zinc Alloy Short Lag Shields (25-Pack) are for indoor and outdoor use. The lag shields feature zinc alloy construction.
|
$9.21
|
Top stores
Home Depot
$9.21
|
|
Lag shields, Die cast zinc alloy, 1/4" short
|
$260.00
boltdepot.com
|
Top stores
boltdepot.com
$260.00
|
|
1/4" Lag Shields Short Zinc Alloy
Lag Shield anchors are designed for anchoring into concrete brick or block. The anchor is available in two lengths, short or long. The short shield is used for anchoring in high grade concrete or where the thickness of the base material prohibits the use of a longer length shield. The long shield is used in lower grade base material or where extra anchoring strength is needed. The shield is manufactured of zinc alloy, a rust-proof material
|
$10.24
hermanscentral.com
|
Top stores
hermanscentral.com
$10.24
|
|
Simpson Strong Tie LSES25S Lag Screw Expansion Shield 1/4" Short (100)
* Drill a hole in the base material using the appropriate-diameter carbide drill bit as specified in the table. Drill the hole to the specified embedment depth plus 1/8" for flush mounting and blow it clean using compressed air. Alternatively, drill the hole deep enough to accommodate embedment depth and dust from drilling. Overhead installations need not be blown clean.
|
$22.99
|
Top stores
FastoolNow
$22.99
|
|
|
Lag Shield Anchor 1/4" Short
Concrete Lag Shield Anchors are designed for anchoring into concrete, brick and block. Lag Screws are used to expand the Lag Shield Anchor against the concrete, brick or block.
|
$25.00
confast.com
|
Top stores
confast.com
$25.00
|
|
WEJ-IT ZLSS14 Lag Shield,1/4 In,pk25
Short Lag Expansion Shield, Rust Resistant Alloy, Length 1 In, Screw Size 1/4 In, Drill Size 1/2 In, Min Embedment 1 In, Package 25
|
$14.09
grainger.com
|
Top stores
grainger.com
$14.09
|
|
T&B B911-1/4 - 1/4in Short Spring Nut
A-100 Series. Short Spring Nut. Nut is square over d size. For all B series channel and inserts. Silver Electroplated Finish.
|
$1.27
galesburgelectric.com
|
Top stores
galesburgelectric.com
$1.27
|
|
|
1/4" Lag Shields Long Zinc Alloy
Lag Shield anchors are designed for anchoring into concrete brick or block. The anchor is available in two lengths, short or long. The short shield is used for anchoring in high grade concrete or where the thickness of the base material prohibits the use of a longer length shield. The long shield is used in lower grade base material or where extra anchoring strength is needed. The shield is manufactured of zinc alloy, a rust-proof material
|
$15.02
hermanscentral.com
|
Top stores
hermanscentral.com
$15.02
|
