25 results for "1/4 Drop-In Anchor, 1/4 In, Pkg-100" between $0.00 and $150.00

Ideal for overhead applications. Requires shallow embedment. Eliminates the need for rod couplings. SIZE:1/4". Weight: 19.00 lb. 100 in a pack. UPC: 013918402002. Manufacturer Part No: WD14.

Drop-in anchors are internally-threaded, deformation-controlled expansion anchors with a preassembled expander plug, suitable for fl ush mount applications in solid base materials. The anchor is set by driving the expansion plug towards the bottom of the anchor using the setting tool

Shop for Hardware & Fasteners at The Home Depot. Hilti HDI 1/4 in. Steel Drop-In Anchors (4-Pack) are intended for use in concrete base materials. These contractor-grade anchors are great for hanging threaded rods (not included) for plumbing, HVAC, pipe suspension, air ducts and suspended ceiling applications.

Drop-In Anchors - Setting Tools Drop-In Anchor Setting Tool For Internal Plug Drop-In Anchors / Steel Zinc. 1) Drill hole to required embedment depth 2) Insert anchor into bole & tap flush w/surtace of base 3) Drive the setting tool into anchor until shoulder of tool is against the anchor 4) Position object to be anchored, insert and tighten bolt

ITW Ramset Red Head RM-14 multi-set ii drop-in anchor 1/4"

Product Details Drill Diameter: 3/8" Min. Depth: 1" Thread Depth: 7/16" The Steel Drop in is an all-steel, machine bolt anchor available in carbon steel and two types of stainless steel. It can be used in solid concrete, hard stone, and solid block. EDGE DISTANCE - SHEAR: For shear loads, an edge distance, E, of 12 diameters (12D) or greater should be used to obtain the maximum shear load. The minimum recommended edge distance, E, is 8 diameters (8D) at which point the shear load should be reduced...

The SeaDog 147806-1 Screw Pin Anchor Bow Shackle is hot dipped, galvanized, drop forged steel. 1/4" size.

The NEW Lipped Drop-In (DIAL) features a lip at the top of the anchor body that keeps the top of the anchor flush with the concrete. This eliminates the need for precisely drilled hole depths and allows for easier flush installation, consistent embedment and uniform rod lengths. Setting Tool Sold Separately.

UNEEDIT.com's philosophy is "Customer service is not a sometimes thing; it's an all the time thing...you don't do something right once in a while, you do them right all time." At UNEEDIT.com, we take the guesswork out of product selection, with clear, objective descriptions, and a knowledgeable customer service department that ensures customers select the right product for every job. Over 100,000 products…Industrial Equipment, Janitorial, Technology, Restaurant, Safety, First Aid/Medical, and Office...

Drop-in anchors are internally threaded deformation controlled expansion anchors with a preassembled expander plug, suitable for flush mount applications in solid base materials. The anchor is set by driving the expansion plug towards the bottom of the anchor using the setting tool. Drop-in anchors are also available in coil-threaded versions for and coil threaded rod. Setting Tool Sold Separately.

Drop-in anchors are internally threaded deformation controlled expansion anchors with a preassembled expander plug, suitable for flush mount applications in solid base materials. The anchor is set by driving the expansion plug towards the bottom of the anchor using the setting tool. Drop-in anchors are also available in coil-threaded versions for and coil threaded rod. Setting Tool Sold Separately.