70 results for "1/4" Filter Regulator Lube Unit" between $25.00 and $300.00

Compact Filter/regulator And Lubricator, Npt 1/4 Inch, Bowl Size 4.09 Ounces, Bowl Material Metal, Air Flow 52 Cfm, Maximum Pressure 250 Psi, Maximum Temperature 150 Degrees Fahrenheit, Height 10.0 Inches, Width 5.06 Inches, 18 Series, Modular Design, Manual Drain, Combo, With Gauge

Compact Filter With Regulator And Lubricator, Npt 1/4 Inch, Bowl Size 4.09 Ounces, Bowl Material Metal, Air Flow 70 Cfm, Maximum Pressure 250 Psi, Maximum Temperature 150 Degrees Fahrenheit, Height 8.35 Inches, Width 7.77 Inches, 18 Series, Modular Design, Manual Drain, Combo, With Gauge

Compact Filter/Regulator and Lubricator, NPT 3/8 Inch, Bowl Size 4.09 Ounces, Bowl Material Metal, Air Flow 65 CFM, Maximum Pressure 250 PSI, Maximum Temperature 150 Degrees Fahrenheit, Height 10.0 Inches, Width 5.06 Inches, 18 Series, Modular Design, Manual Drain, Combo, With Gauge

Compact and efficient, these units combine all the performance features of a standard filter and regulator in a single attractive package. Special venting feature automatically bleeds off downstream pressure. 40 micron filter element. Bowl guards are recommended for added safety. ¼” NPT. Individually carded.

Filter with Piggyback Regulator and Lubricator Unit 1/4in. NPT w

The C72A Series Air Line Air Filter-Regulator-Lubricator Combination Units are designed for use as a single in-line unit or as part of Norgren's Excelon® modular compressed air preparation supply system. As a modular component, this filter-regulator-lubricator can quickly be attached to smooth start / exhaust valves, safety lockout valves and pipe adapters. With our Quickclamp® and Quickclamp® and wall bracket accessories, a complete compressed air supply system can be assembled and mounted...

The Campbell Hausfeld filter / regulator combines a general purpose filter with a pressure regulator in one compact unit. The filter is designed to remove most liquid and solid particles from the air supply. The self-reliance pressure regulator is used to adjust the outlet pressure between 0 - 125 psi. Combines mini general purpose filter and mini regulator into one unit to save space 15 SCFM flow capacity @ 90 psi 1/4 In. NPT(F) ports 150 psi maximum inlet pressure

Compact unit combines all filter and regulator features to provide optimal performance in minimal space. Five micron filter elements. Locking control knob assures continued pressure. Manual drain - 150 PSI maximum pressure and 1/4" ports.

The features of accurate pressure regulation with maximum water and dirt separation are provided in a single, compact unit. The filter significantly increases the life of expensive equipment, such as air tools, air valves, air cylinders and air motors. The regulator employs a solid piston. Unlike diaphragms, the solid piston resists rupture, cracking or tearing under pressure or high cycle rates. Tru-Flate ® Regulators have fast flow capabilities. Maximum operating pressures are: 150 PSI at 125°...

Regulate air for all types of pneumatic tools and equipment. The filter removes solid particles and condensation. FEATURES Solid particle and condensation filter Lubricator for working pneumatic equipment Provides clean, dry, regulated air,increasing the lifespan of your pneumatic tools. SPECIFICATIONS Handles up to 140 PSI of compressed air 1/4" NPT air inlet

5 micron particle filter - Removes bulk oil and water while filtering the air. 120 CFM filter capacity - For use with multiple spray guns and air tools. 50 CFM regulator capacity - Additional filtered regulated outlet, Filtered main line outlet. Simple filter element replacement - No tools required after bowl is removed. Large bowl - less frequent draining of accumulated water. Easy installation - No elbow required. Air inlet located at top of unit in front of mounting bracket. Mounting bracket...

Filter-regulator-lubricator, Modular Combination Design Type, Sub Compact 12 Series, Npt 1/4 In, Cfm 40, Max Pressure 150 Psi, Max Temp 125 F, Bowl Type Polycarbonate Material, Bowl Size 2 Oz, Height 7.59 In, Width 5.7 In, Adjustment Range 0 To 125 Psi, Bowl/adjustment Knob Type Non Rising, Gauge Port Size 1/4

Filter/Regulator-Lubricator, Combination Design Type, Sub Compact 12 Series, NPT 3/8 In, CFM 42, Max Pressure 250 PSI, Max Temp 175 F, Bowl Type Metal Material, Bowl Size 2 oz, Height 8.5 In, Width 4.33 In, Adjustment Range 0 to 125 PSI, Bowl/Adjustment Knob Type Non Rising, Gauge Port Size 1/4

ARO 1500 series filter/regulator-lubricator combo unit with flush mount gauge is designed for general purpose air filtering, pressure control, and lubrication over a wide range of applications. The integral filter/regulator and lubricator are connected by a unique modular mounting system which saves space, set-up time, and piping costs. Filter with 5 micron element removes airborne solids and liquid contaminants from the compressed air line. Self-relieving regulator features a pull to adjust and...

Filter/regulator-lubricator, Combination Design Type, Sub Compact 12 Series, Npt 1/4 In, Cfm 42, Max Pressure 250 Psi, Max Temp 175 F, Bowl Type Metal Material, Bowl Size 2 Oz, Height 8.5 In, Width 4.33 In, Adjustment Range 0 To 125 Psi, Bowl/adjustment Knob Type Non Rising, Gauge Port Size 1/4

Combination Units for controlling air pressure, filtering of air lines and lubrication of multiple air tools or pumps. Push-lock adjusting knob on regulator. Replaceable filter element. Standard with pressure gauge. Bodies are either Zinc or Aluminum construction. Bowls are transparent, polycarbonate construction. Automatic drain feature is standard on filters.

1/2" Filter/Regulator (150 PSI)", "27 Series combination units offer pre-assemblied units for fast installations. The integral filter/ regulator offers a space saving design. Duo and trio assemblies utilize the modular clamping system to minimize installation problems.

ARO 1500 series compact piggyback air filter/regulators with flush mount gauge and metal bowl are used for general purpose compressed air filtering and pressure control. The compact design combining the filter and regulator into one integral unit saves space, set-up time, and piping costs. Self-relieving regulator features a pull to adjust and push to lock pressure adjustment knob. The unit has an aluminum body and metal bowl with sight glass. Filter with 5 micron element removes airborne solid and...