28 results for "1 in. x 4 in. Brushed Aluminum Tile (Horizontal) Fiberock Backing" between $1.00 and $3,000.00

5-1/4" SB-Series 2-Way Car Component System. Power Handling: Peak: 800 watts per set / 400 watts each side RMS: 200 watts per set / 100 watts each side. Strong aluminum cone. Rubber surround. 1-1/16" (28mm) Hand treated fabric, soft dome tweeter. Neodymium tweeter magnet. 4 ohms impedance. Crossover with 4,000 Hz crossover point. Phase plug helps direct the sound waves and enhance sound quality. 4-1/8" Magnet structure. Includes grilles. Sensitivity: 85 dB. Frequency Response: 35-25,...

Provides a safe, convenient way to store microscopes. Solid hardwood construction provides strength and durability. Unbreakable aluminum glides for both front and back sliding doors. Removable wire dividers enable individual spaces to store up to 24 standard classroom microscopes. Moves with ease on 4" locking ball-bearing swivel casters. Includes removable wire dividers, solid hardwood, solid oak and oak veneer cabinet with natural transparent finish. Ships via freight, dock delivery - please...

ROTOR BOLT CIRCLE: 12 X 8.75". HAT OFFSET: .55". CENTER REG: 2.17". WEIGHT: 2.0 LBS. HAT BOLT CIRCLE: 4 X 3.93". ROTOR MOUNT HOLE SIZE: 1/4-20. CLEARANCE I.D.: 7.49". FACE THICKNESS: 0.30". GT SERIES BIG BRAKE SHORT OFFSET HATS ARE PRECISION MACHINED FROM PREMIUM ALUMINUM ALLOYS FOR HIGH STRENGTH AND ATTENTION TO MINIMIZED WEIGHT. HATS IN THIS CATEGORY FEATURE THREADED ROTOR MOUNT HOLES FOR USE WITH STANDARD THROUGH-HOLE MOUNT ROTORS. THREADED HOLE HATS MAY ALSO BE USED WITH T-NUTS OR BOBBINS...

Tile Size: 2" wide x 4" tall. Half tile: 1" x 4". Material: Ceramic Tile. Character Color: Black. Character size: 1.5" x 3". Specify requirement in check-out. Match with Frame 3X6 series.

Features a very high strength-to-weight ratio. Resistant to corrosion, rust, chemicals, solvents and oils. Polyurethane tread is non-marking, non-sparking, abrasive resistant and quiet operation. Temperature range: 45°F to + 180°F. Durometer hardness 90 Shore A scale. FOB Shipping Point.

Part # 2WS38204 Polyurethane on Aluminum Core Wheel 4" x 2" with 1-3/16" Plain Bore 800 lbs. capacity

SKU:UAR-0415-08 Manufacturer: RWMUrethane on Aluminum wheels roll easier than rubber wheels—and outlast them, too. Polyurethane is liquid cast and chemically bonded to aluminum cores, then crowned slightly, to reduce the energy needed to turn the wheel under a heavy load. UA wheels have capacities that approach those of steel wheels. They feature outstanding abrasion resistance, oil & chemical resistance, and good floor protection. UA wheels are non-marking.

Heavy Duty Stainless Steel Construction for Base, Sides and Tops. Hard Coated Aluminum Heat Shelf. 1-1/2" Insulation Throughout Shelf Base. Polished Mirror Stainless Steel Reflectors on top heat. Thermostatically Controlled Heat for Base and Rear Overhead Heat Source. Decorative Powder Coated Sides, Fronts, Back and Insets. Shatter Resistant Incandescent Lights. 4" High Temperature Polycarbonate and Steel Legs Anchored to a Solid Stainless Steel Base. Tempered Glass Sides for Maximum Visibility...

Designed as a wiring, junction, and pull box, this is the first horizontal-mount Type 3R enclosure available. It is used in locations where a vertical mounting surface is not available, such as rooftops or outdoor pads. The drip shield is the cover; the cover screws are threaded into the outward-formed flange to prevent the ingress of water from snow, sleet, or rain. Optional mounting feet are included. Maintains UL/cUL 50 Type 3R rating when mounted horizontally.

The Temjin TJ09 is the first SilverStone chassis designed with graphics card cooling as one of the priorities. To meet this challenge, a brand new mid-section air duct was created to bypass the hard drive cage, allowing the strategically placed 120mm to draw cool air from outside of the chassis and blow it directly onto the expansion slot area. CPU and hard drives are also cooled exclusively by 120mm fans to maximize airflow while reducing noise. Covered in styling reminiscent of beautiful chassis...

Tile Size: 2" wide x 4" tall. Half tile: 1" x 4". Material: Ceramic Tile. Character Color: Green. Character size:1.5 " x 3 ". Specify requirement in check-out. Match with Frame 2X4 series.

Shown in a 4 x 5 tile configuration Note: Kiln fired murals may take 8 weeks for fabrication