3708 results for "1 channel amplifier" between $50.00 and $800.00

RMS Power @ 4 Ohms: 1 x 300W - Frequency Response 10 Hz-300 Hz (±3dB) - Glass Epoxy PCB - Remote Bass Boost - Dimensions:10.24''W x 2.21''H x 16.14''L RMS Power @ 2 Ohms: 1 x 500W - Output Power @ 14.4v DC, 50Hz - Silver RCA Inputs - Input Impedance: 10K Ohms RMS Power @ 1.3 Ohms: 1 x 700W - 1 Ohm Stable - Custom Terminal Block for Speaker Connection - Soft Turn On/ Off Maximum Power Output 2400W Mono - MOSFET Power Supply - Thermal / Overload / Short Circuit Protection - Advanced Protection Circuitry...

Originally released as the international Award-winning RGH900, this Home Theatre Amplifier remains the same in all things (other than now having a variant of that model number, i.e. RGH900-1). It is designed for the audiophile, with sonics that 'flatten' the competition.

BRAND NEW BRAND X XXL2900X1D 1 Channel Digital Class D Mobile Audio Amplifier with Wired Bass Remote Control. 900 Watts x 1 Channel @ 4 Ohm. 250 Watts x 1 Channel @ 2 Ohm. 2900 Watts Max Power. Low Pass 40 Hz-400 Hz. Discrete Class A/B MOSFET Mobile Audio Amplifier. Top Mounted Fully Adjustable Linkwitz Riley 12dB Crossover Network. Full Range Pass Thru. Fully Adjustable Subsonic Filter. 0/4 Gauge Billet Style Machined High Current Power & Speaker. Terminal Block. HQ Surface Mount, RCA...

Low Impedance Operation. SORT Protection Circuitry (Short circuit, Over-voltage, Reverse polarity, Thermal). MOSFET Power Supply. KickBass: 0-18 dB @ 45 Hz. Built-In Variable Crossover: 12 dB High or Low-Pass operation (50-200 Hz). High & Low level inputs. PAST (PRE Amp Signal Transfer) Output RCA jacks. Custom tooled gold plated connectors. SAMS (Stereo And Mono Simultaneously) bridged mono load and a stereo load at the same time. Cast aluminum EndKaps. 60W RMS x 2 chan. @ 4 ohms. 75W...

Hifonics new illuminated heat-sink. Design with blue LED light pumps. Audio-Pure Ultra-Fi MOSFETS. Low-distortion class A/B amplifier circuitry. With high-speed MOSFET output devices. Fully adjustable Accu-Cross crossovers. 18dB variable bass equalization. Dash-mountable bass remote control included. Fixed 24dB subsonic filter. Pulse wave modulated MOSFET EXVP. SPC simpatico twin-coil design. HSMD Hifonics surface mount design. Line output for amplifier daisy chaining. Gold oversized...

200W max power. 80W x 2 into 2Ω, @ <0.1% THD. 600W x 2 into 4Ω, @ <0.1% THD. Selectable bass boost. Adjustable low pass crossover @ 50–300Hz. Gold plated RCA, speaker & power connectors. Speaker level input. Dim: 7.13"H x 11"W x 2.25"D.

Infinity Reference Series 1210a 1 CHANNEL POWER AMPLIFIER (Service Manual) $9.95

The STW2 is an ETS two way 1 channel amplifier base station that is capable of monitoring live audio or be used with devices such as tape recorders with record/playback functions. The STW2 features an inbuilt talk-back microphone with a pre-amp 70V line speaker output, it also comes equipped with a remote speaker volume control, a call switch input, a tape monitor switch plus RCA jacks for easy VTR connections. The STW2 comes complete with a 3.5mm headphone jack, a 1 watt power amplifier, a 3” full...

1550 Watts of Maximum Music Power. 850W x 1 into 2 Ohms, @ 1.0% THD. Input Voltage Sensing. Precise Frequency Selector -24dB / Oct. Low Pass Crossover, 30-230Hz. Strappable (Multiple amplifiers connected to one load). Double Sided FR4PC Circuit Board. Soft Turn-on and Turn-off Circuitry. Polarity Control Switch. Remote Bass Control Knob ready (BC2 sold separately). Adjustable Subsonic Filter, 10-80Hz. Variable Bass Boost; 0-15dB @ 30-125Hz. Ground loop isolation circuit. Gold Plated Connectors...

GAIN: MMA400/MMA800: 64, 74 or 84dB. Each channel's gain is dependent on output gain jumper plug position. MAXIMUM INPUT: MMA400/MMA800: RF bypassed, balanced 40dB gain instrumentation amplifier, Zin=20Kohm. Maximum input is -20dBu. Gain can be reduced to 0dB to accept line level sources up to +22dBu by removing a jumper. MAXIMUM OUTPUT: +24dBm into 600 ohm loads. 15Vrms into high impedance loads. MMA/MLA-1: Transformer Balanced, 60 ohm source Z. NOISE: MMA400/MMA800: E.I.N.= -120dBm maximum with...

Power @ 4-Ohm 90w x 4 Power @ 2-Ohm 160w x 4 Bridged Power @ 4-Ohm 320w x 2 Input Voltage Sensing Precise Frequency Control Number of Channels 4/3/2 MOS-FET Power Supply 2-Ohm Stable Adjustable - 18db. High/Low Pass Crossovers 55Hz-550Hz or 550Hz-5.5kHz with the Crossover Frequency Multiplier Variable Bass Boost; 0-15dB @ 45Hz Gold Plated Connectors; RCA/ Speaker/ Power Speaker Level Input Dimensions14-11/16" x 9" x 2-5/8"

GAIN: MMA400/MMA800: 64, 74 or 84dB. Each channels gain is dependent on output gain jumper plug position. MAXIMUM INPUT: MMA400/MMA800: RF bypassed, balanced 40dB gain instrumentation amplifier, Zin=20Kohm. Maximum input is -20dBu. Gain can be reduced to 0dB to accept line level sources up to +22dBu by removing a jumper. MAXIMUM OUTPUT: +24dBm into 600 ohm loads. 15Vrms into high impedance loads. Transformer Balanced, 60 ohm source Z. NOISE: MMA400/MMA800: E.I.N.= -120dBm maximum with 150 ohm...

Brand-X XXL609X2HE 1910-Watt 2-Channel Mosfet Amplifier Top Mounted Fully Adjustable Linkwitz Riley Crossover Network Full Range Pass Thru Line Outputs Wired Bass Remote Control Fuses: 3 x 60 Amp Maxi

Mono subwoofer power amplifier delivers 500 watts x 1 @ 4 ohms; 500 watts x 1 @ 2 ohms RCA to bare-wire adapters work with all line-level and speaker-level inputs, with switch and Hi2 setting Graphical set-up/status displays for both channel pairs with crossover types, frequency readout Digital input mixer allows any input signal to be routed to either speaker output Digital signal processing for precise control of all input mixer, electronic crossover, and output levels

2 x 900W MAX at 4 ohms 1800W max at 4 ohms bridged Dual switchable bass boost Dual variable electronic crossover network