|
1" Straight Plug Cutter 1/2" Shank - Fuller
Make plugs which will almost exactly match the grain pattern of the wood surrounding the countersunk hole. Note that 1/2" cutters and smaller run well at about 1000 to 1200 rpm, run larger cutters at 600 to 800 rpm. Designed for drill press use. 3/4" max. plug length. 
|
$37.20
McFeely's
|
Top stores
McFeely's
$37.20
|
|
WL Fuller 11681375 1-3/8" Standard Four Flute Plug Cutter, 1/2" Shank
Description WL Fuller 11681375 1-3/8" Standard Four Flute Plug Cutter, 1/2" ShankDescriptionDesigned for clean cutting and hardened for long life. These two and four-bladed Plug Cutters do not eject the plugs. The plug remains in the board and can be broken out with a screwdriver or the board can be sawed to free the plug. These tools cut fast and make smooth chamfered plugs for easy starting in counterbored holes. Made of Carbon Steel and heat-treated for long tool life. Suitable for both soft...
|
$63.53
circlesaw.com
|
Top stores
circlesaw.com
$63.53
|
|
Wood Plug Cutters 11640250 1/4 in Plug Dia 1/4 in Shank
Cut your own wood plugs with Fuller Plug Cutters. Made of Carbon Steel heat treated to 62c hardness. Designed for clean cutting and hardened for long life. Four bladed plug cutters do not eject plugs; it remains on the board and can be broken out with a screwdriver or sawed free. Suitable for both Softwood and most Hardwoods.
|
$10.48
|
Top stores
Jamestown Distributors
$10.48
|
|
Wood Plug Cutters 11681125 1-1/8 in Plug Dia 1/2 in Shank
Cut your own wood plugs with Fuller Plug Cutters. Made of Carbon Steel heat treated to 62c hardness. Designed for clean cutting and hardened for long life. Four bladed plug cutters do not eject plugs; it remains on the board and can be broken out with a screwdriver or sawed free. Suitable for both Softwood and most Hardwoods.
|
$47.83
|
Top stores
Jamestown Distributors
$47.83
|
|
Hitachi 725872 1/2-Inch Straight Shank 2-Inch to 8-Inch Diameter Quick Change Core Cutters
High Quality Carbon Hardened Steel High Tolerance milled shank provides perfect fit CNC Controlled manufacturing ensures 100% quality consistency, Weight: 0.0 lbs., Manufacturer: Hitachi
|
$65.77
|
Top stores
Amazon.com
$65.77
|
|
Timberline 607-120 Straight Wood Plug Cutter 1/2 Dia x 3/8 Shank
Straight Wood Plug Cutters
|
$4.97
|
Top stores
Toolstoday.com
$4.97
|
|
1/4" Straight Plug Cutter 1/4" Shank - Fuller
Make plugs which will almost exactly match the grain pattern of the wood surrounding the countersunk hole. Note that 1/2" cutters and smaller run well at about 1000 to 1200 rpm, run larger cutters at 600 to 800 rpm. Designed for drill press use. 3/8" max. plug length.
|
$10.30
McFeely's
|
Top stores
McFeely's
$10.30
|
|
Relton RB-40 2-1/2" x 12" Rebar Cutter, Straight Shank
The Relton carbide-tipped rotary rebar cutter is designed for use in a standard 1/2" chuck drill motor or SDS Plus hammer, provided the selector mechanism is kept in the rotary-only position. The Relton carbide tipped rotary rebar cutter is intended for rotary drilling only. Percussion (hammering action) will damage the tool
|
$154.00
hermanscentral.com
|
Top stores
hermanscentral.com
$154.00
|
|
Big Horn 19154 1/4 in. Shank 1/2 in. Plug Cutter
High Quality Made in the USA by W. L. Fuller.
|
$18.95
dynamitetoolco.com
|
Top stores
dynamitetoolco.com
$18.95
|
|
Hss S Tooth, Woodruff Keyseat Cutter, #302-1/2, 5/16" Diameter 3/32" Face, 1/2" Shank Diameter
High Speed Steel TMX Straight Tooth Woodruff Keyseat Shank Cutter. HSS TMX Straight Tooth, Woodruff Keyseat Cutter, #302-1/2, 5/16" diameter x 3/32" face width x 1/2" shank diameter x 2-3/32" overall length (OAL). Designed to cut keyways and keyseatsStraight teeth provide better surface finish
|
$13.25
|
Top stores
Global Industrial
$13.25
|
|
WL Fuller 11680875 7/8" Standard Four Flute Plug Cutter, 1/2" Shank
WL Fuller 11680875 7/8" Standard Four Flute Plug Cutter, 1/2" ShankDescriptionDesigned for clean cutting and hardened for long life. These two and four-bladed Plug Cutters do not eject the plugs. The plug remains in the board and can be broken out with a screwdriver or the board can be sawed to free the plug. These tools cut fast and make smooth chamfered plugs for easy starting in counterbored holes. Made of Carbon Steel and heat-treated for long tool life. Suitable for both soft and most hardwoods...
|
$29.52
circlesaw.com
|
Top stores
circlesaw.com
$29.52
|
|
Powers Fasteners 00845 1/2 x 12 Rebar Cutter Straight Shank
When drilling with a hammer drill or rotary hammer, it is important to stop drilling immediately when a standard carbide bit contacts steel reinforcing bar or wire mesh. If the drilled hole cannot be relocated a rebar cutter bit is used to drill through the embedded steel. Insert the rebar cutter bit into the chuck of a standard 1/2" rotary drill. Place the bit into the partially drilled hole until it contacts the mesh or reinforcing bar. Drill through the embedded steel with the rebar cutter bit...
|
$47.90
hermanscentral.com
|
Top stores
hermanscentral.com
$47.90
|
|
Relton RB-8 1/2" x 12" Rebar Cutter, Straight Shank
The Relton carbide-tipped rotary rebar cutter is designed for use in a standard 1/2" chuck drill motor or SDS Plus hammer, provided the selector mechanism is kept in the rotary-only position. The Relton carbide tipped rotary rebar cutter is intended for rotary drilling only. Percussion (hammering action) will damage the tool
|
$37.73
hermanscentral.com
|
Top stores
hermanscentral.com
$37.73
|
|
Champion CM79 1-1/2" Rebar Cutter with Straight Shank
Champion CM79 Rebar Cutters - Easy drilling through embedded rebar and surrounding concrete. Use in any 1/2" capacity or larger drill motor with a three jaw chuck and no load speed of 440 RPM
|
$99.84
hermanscentral.com
|
Top stores
hermanscentral.com
$99.84
|
|
Relton RB-22 1-3/8" x 12" Rebar Cutter, Straight Shank
The Relton carbide-tipped rotary rebar cutter is designed for use in a standard 1/2" chuck drill motor or SDS Plus hammer, provided the selector mechanism is kept in the rotary-only position. The Relton carbide tipped rotary rebar cutter is intended for rotary drilling only. Percussion (hammering action) will damage the tool
|
$92.40
hermanscentral.com
|
Top stores
hermanscentral.com
$92.40
|
|
CMT 1-3/8" Plug Cutter X 1-27/32" Overall Diameter X 6 Teeth X 6-5/16" Overall Length X 5/8" Shank
|
$43.40
woodline.com
|
Top stores
woodline.com
$43.40
|
|
WL Fuller 11640562 9/16" Standard Four Flute Plug Cutter, 1/4" Shank
Description WL Fuller 11640562 9/16" Standard Four Flute Plug Cutter, 1/4" ShankDescriptionDesigned for clean cutting and hardened for long life. These two and four-bladed Plug Cutters do not eject the plugs. The plug remains in the board and can be broken out with a screwdriver or the board can be sawed to free the plug. These tools cut fast and make smooth chamfered plugs for easy starting in counterbored holes. Made of Carbon Steel and heat-treated for long tool life. Suitable for both soft and...
|
$18.21
circlesaw.com
|
Top stores
circlesaw.com
$18.21
|
|
|
Champion CM79 1/2" Rebar Cutter with Straight Shank
Champion CM79 Rebar Cutters - Easy drilling through embedded rebar and surrounding concrete. Use in any 1/2" capacity or larger drill motor with a three jaw chuck and no load speed of 440 RPM
|
$32.30
hermanscentral.com
|
Top stores
hermanscentral.com
$32.30
|
|
CMT 1/2" Plug Cutter X 61/64" Overall Diameter X 4 Teeth X 5-1/2" Overall Length X 1/2" Shank
|
$14.90
woodline.com
|
Top stores
woodline.com
$14.90
|
|
CMT 1-1/4" Plug Cutter X 1-19/32" Overall Diameter X 5 Teeth X 6-5/16" Overall Length X 1/2" Shank
|
$41.15
woodline.com
|
Top stores
woodline.com
$41.15
|
