21 results for "[Pre-Order] LEE Filters Lens Hood.[Ships FREE!]" between $10.00 and $300.00

Pro hood designed for use with Cokin's Series P filters. Accepts Lee 4" filters in front slot.

It features two 2mm filter slots immediately behind the bellows. This unit is ideal for social or studio photographers who may not require a full filter holder.

The LEE Slotted Wide-Angle Lens Hood has much larger bellows to allow for effective shading on wide or particularly large lenses, where the standard hoods could cause vignetting. It has 2 built in filter slots.

Lens Hood adjusts from wide-angle to normal to telephoto. Suitable for lenses from 24mm to 210mm focal lengths. Ideal for zoom lenses. Material is acid proof, temperature insensitive. Internal baffles absorbs all stray light reflections. Inside thread for filters.

The Raynox 82mm Telephoto Lens Hood is specifically designed for use with Raynox DCR-series Telephoto Conversion Lenses that feature a 82mm filter thread.Lens hoods are primarily designed to prevent unwanted stray light from entering the lens by extending and shading the end of the lens. In addition, since the end of the lens is extended, you also get the added benefit of some extra protection from accidental impact.

The heart of the COKIN Creative System is the filter-holder. Once attached to the lens, thanks to an adaptor ring, it can carry not only round and square filters but also modular accessories (modular hood, coupling rings etc...). The notches found both on the filter-holder and on the edge of round filters enable you to rotate the round filters to just the right position. Square filters slide within filter-holder slots in order to decentre special effects. For shorter focal lengths 20-24 or 28 mm...

This ring attaches to your lens barrel, for mounting one of Lee's lens hoods or filter holders. Once the adaptor is in place, the holder clips firmly to it using a quick-release, spring-loaded mechanism. Sturdy plastic construction ensures long life.

This ring attaches to your lens barrel, for mounting one of Lee's lens hoods or filter holders. Once the adapter is in place, the holder clips firmly to it using a quick-release, spring-loaded mechanism. Sturdy plastic construction ensures long life.

The modular lens hood intensifies contrasts and eliminates unwanted reflections.It fits simply onto the filter-holder by just pressing on the upper and lower parts of the lens hood. You can attach several modular hoods to one another, depending on the focal length of your lens.