|
The Irwin Miter Saw Laser Guide fits onto most miter saws to create a laser-guided power tool. The guide projects a line just to the left of the cut to enable precise cuts and includes two batteries with a 1.5-hour life and extra-long bolts to secure the guide to your saw. It automatically turns on and off as the saw blade starts and stops rotating.
|
|
|
Irwin Miter Saw Laser Guide
Retro-fit your miter saw laser guide into a laser guided power tool. The IRWIN Miter Saw Laser Guide will project an accurate laser line onto the cutting surface for accurate cuts.
|
|
|
Irwin 3061001 Miter Saw Laser Guide
Irwin 3061001 Miter Saw Laser Guide Irwin 3061001 Miter Saw Laser Guide Features: Retro fit your miter saw into a laser guided power tool Projects a laser guide line for accurate cuts Easy to install Automatic on and off with saw blade rotation Extra long bolts included
|
|
|
Fits most miter saws, but does not fit Bosch, Ridgid and Pro Tech. Automatic on/off with blade rotation. Includes batteries. Battery life: 1.5 hours or 5,000 cuts. Diode life: 3,000 hours or 2 million cuts. Self-calibrating. Projects a clear line just to the left of the cut.
|
|
|
IRWIN MITER SAW LASER GUIDE Fits most miter saws, but
IRWIN MITER SAW LASER GUIDE. *Fits most miter saws, but. does not fit Bosch, Ridgid. and Pro Tech. *Automatic on/off with blade. rotation. *Includes batteries. *Battery life: 1.5 hours or. 5,000 cuts. *Diode life: 3,000 hours or 2. million cuts. *Self-calibrating. *Projects a clear line just. to the left of the cut. *Clamshell.
|
|
|
Easy to install and use! 1. Mount saw blade on the miter saw. 2. Use the laser guide as the outside washer - postion warning side out. 3. Attach using existing bolt - if no bolt is too short, use the appropriate extra long bolt that is included.Laser activates On/Off with the rotation of blade! Note: Does NOT fit Bosch, Ridgid or Protech Saws! Irwin 3061001 Miter Saw Laser Guide Features: -- Battery Life -- 1.5 hours or 5,000 cuts -- Diode Life -- 3,000 hours or 2 million cuts The Irwin 3061001 Miter Saw Laser Guide Includes: -- Batteries -- Extra long bolts -- Case Works on DeWALT, Makita, Milwaukee, Porter-Cable, Hitachi, Wilton and many other 8-1/4", 8-1/2", 10" and 12" miter saws except Bosch, Ridgid or Protech. A small number of 12" miter saws will not allow the laser guide to mount flush when using a thin kerf sawblade because the bushing on the arbor of the miter saw is too
|
|
|
Irwin 3061001 Miter Saw Laser Guide
Does not fit Bosch, Ridgid, or ProTech 12" miter saws and radial arm saws. A small number of 12" miter saws will not allow the laser guide to mount flush when using a thin kerf sawblade because the bushing on the arbor of the miter saw is too thick. Using a standard 12" sawblade with an approximately 1/8" thick body should prevent this problem.
|
|
|
Irwin 3061001 Miter Saw Laser Guide
* Retro-Fit your miter saw into a laser guided power tool. * Projects a laser guide line for accurate cuts. * Automatic On/Off with saw blade rotation. * Extra long bolts included. * Batteries Included.
|
|
|
* Retro-Fit your miter saw into a laser guided power tool. * Projects a laser guide line for accurate cuts. * Easy to install. * Automatic On/Off with saw blade rotation. * Fits all 8-1/4", 8-1/2", 10" and 12" miter saws except Bosch, Ridgid or Protech. * Includes extra long bolts, batteries and soft sided carrying case.
|
|
|
Lusting after one of those fancy new miter saws with a laser guide? Well, retro-fit with this inexpensive, easy-to-install laser guide and you don't have to invest a mint in a new saw. It turns on and off automatically with the saw and included batteries last for approximately 5000 cuts.
|
|
|
Miter Saw Laser Guide
Easy to install. Automatic On/Off with saw blade rotation. Extra long bolts included Batteries Included
|
|
|
Retro-Fit your miter saw into a laser guided power tool. Projects a laser guide line for accurate cuts. Easy to install. Automatic On/Off with saw blade rotation. Includes extra long bolts, batteries, and storage case Fits most 8-1/4", 8-1/2", 10", and 12" Miter Saws except Bosch, Ridgid & Pro-Tech. Please contact Irwin at 800-GO-IRWIN to make sure it fits your saw.
|
|
|
Hitachi C12LSH 15 Amp 12-Inch Dual Bevel Sliding Compound Miter saw with Laser Guide and Digital Bevel Display
The award-winning Hitachi C12LSH 12-Inch Sliding Dual Compound Miter Saw with Laser Marker and Digital Display provides smooth, accurate miters and crosscuts in a variety of workpieces, including wood, plywood, crown molding, decorative panels, soft fiberboard, hard board, and aluminum sashes. A top-of-the-line tool for trim carpenters, framers, and woodworkers who demand precision and reliability, the C12LSH features a compact slide system, an LCD, Hitachi's exclusive Laser Marker System, and more. ...
|
|
|
Greent 10 Inch Compound Miter Saw with Laser Guide
1600W Double Insulated Motor with Electric Brake (4200 RPM). Ergonomically Designed Trigger Switch for Comfort. Carbide Blade Included. Laser Guide with (2) AAA Batteries Included. Rugged Lightweight Aluminum Construction. 9 Positive Miter Stops at: 0? 15? 22.5? 30? and 45? right & left. Cutting Capacity: 90? Cut Off (2-5/8 x 5-3/4); 45? Miter right & left (2-5/8 x 4). Adjustable Bevel up to 45?. Pre-Drilled Base Holes for Bench Mounting and Screw Holes for Easy Jobsite Mounting. Safety...
|
|
|
Product Description The new C8FSE 8-1/2" compound miter saw from Hitachi builds on the tradition of their previous slide compound miter saws. Not only is the C8FSHE one of the lightest and most portable saws on the market it also has an above standard dust collection system, Laser Guide System and LED Work Light. This along with the other added features makes it a perfect tool for trim carpenters, contractors and woodworkers.
|
|
|
Makita LS1013FL Factory Reconditioned 10 inch Dual Slide Compound Miter Saw with Laser Guide, 15 Amps, 3700 RPM
Product Description-Makita LS1013FLR The Makita LS1013FL is a Factory Reconditioned 10 inch Dual Slide Compound Miter Saw with Laser and Fluorescent Light. It features a built-in laser with micro fine adjustments which clearly indicates line of cut. The independent switch allows laser to be seen independently of blade rotation. The built-in high output fluorescent light illuminates work area and lasts 2000 hours on average and the dual steel rails supported by linear ball bearings ensure stable...
|
|
|
Makita LS1214FL 12 Dual Slide Compound Miter Saw, Laser guide, and Fluorescent Lamp
* Built-in laser with micro fine adjustments clearly indicates line of cut; independent switch allows laser to be seen independently of blade rotation. * Built-in high output fluorescent light illuminates work area and lasts 2,000 hours on average. * Dual steel rails supported by linear ball bearings ensure stable, accurate cutting. * Powerful, direct drive 15 AMP motor never slips or bogs down. * 9 positive stops at 15°, 22.5°, 31.6°, 45° left or right and at 0° for the most common miter cuts...
|
|
|
Irwinrial Tool 3061001, Miter Saw Laser Guide, Fits Most Miter Saws, Includes 2 Batteries, Life Of 1.5 Hours Or 5,000 Cuts, Diode Life Of 3,000 Hours Or 2 Million Cuts, Does Not Fit The Bosch, Ridgid & Pro-Tech Model Miter Saws, Projects A Clear Line Just To The Left Of The Cut.
|
|
|
Irwin 3061002 - Chop Saw Laser Guide
* Turn your abrasive chop saw into a laser guided power tool. * Laser guide line enables faster and more accurate cuts. * Installs easily. * Automatic On/Off with saw blade rotation. * Batteries Included. * Adapter included.
|
|
|
Model 21369 fits most 5/8 arbor 7-1/4, 8, 10, and 12 chop, miter, sliding compound miter and hand held circular saws. (Does not fit Bosch, Ridgid, or Pro-Tech miter and radial arm saws)Some 12 miter saws will not allow flush mounting when using a thin kerf saw blade-switching to a standard 1/8 thick body blade should prevent this problem. Model 21367 is designed for radial arm saws. Model 21360 Fits lager saws with 1 Center hole. Each includes three 1.55V silver oxide SR44 batteries, extra batteries...
|
|
|
Miter Saw Laser Guide
Retro-Fit your miter saw into a laser guided power tool. Projects a laser guide line for accurate cuts. Easy to install. Automatic On/Off with saw blade rotation. Extra long bolts included. Batteries Included. Battery Life: 1.5 Hours or 5,000 Cuts. Diode Life: 3,000 Hours or 2 Million Cuts.
|
|
|
New Miter Saw Laser Guide ~ Fits Most 8" 10" 12" Click here for more images No more guessing, make precise cuts the first time, every time.Improves safety, where the line is projected, the blade cuts! Fits most major brands of 7-1/4" through 12 miter saws. Provides a clean, bright, easy to see beam of light.Saves time and money, no more wasted boards because of a missed cut line. No adjustments, No confusing parts.FEATURES No more guessing, make precise cuts the first time, every time. Fits
|
|
|
* Fits most 7-1/4", 8", 10", & 12" Miter, Sliding Miter, Chop and Portable Saws. * Provided with 2 extra sets of Silver Oxide batteries. * Laser Module - <5mW Wavelength - 650Nm Class IIIA Laser. * New brighter more acurate laser line. * New thinner design to fit more saws. * New recessed laser design to protect the laser from being hit on deep cuts.
|
|
|
The new C8FSE 8-1/2" compound miter saw from Hitachi builds on the tradition of their previous slide compound miter saws. Not only is the C8FSHE one of the lightest and most portable saws on the market it also has an above standard dust collection system, Laser Guide System and LED Work Light. This along with the other added features makes it a perfect tool for trim carpenters, contractors and woodworkers.
|
|
|
12" Sliding Compound Miter Saw with Laser Guide
Cutting capacities: 4" x 12-3/16" at 90°; 8-1/4" x 2-1/8" at 45°. Easy-to-read miter scale. 4300 RPM. 12" diameter, 60 tooth C2 carbide tipped steel blade. Comes with a dust bag, machined aluminum fence, and table clamp. 120 volts, 15 amps, and 60 Hz. Machined aluminum table top with cast aluminum base. Arbor size: 1". Dual linear slide bearing.
|
|
(US)
