|
The Accel Fuel Injectors provide precise control of fuel delivery and atomization for increased power, improved throttle response and better fuel economy. These fuel injectors feature a high impedance of 12.0 ohms and works properly with the vehicles Engine Control Unit. They utilize a precision ground, pintle design to produce a wide angle conical spray pattern of 150 micron droplets, for ultra fine fuel atomization and improved fuel efficiency. The fuel injectors are flow tested at the factory and are balanced...
|
|
|
O.E.M. replacement. Made in USA.
|
|
|
|
|
|
HKS Fuel Injectors 555cc SR20DET As boost pressure is increased on forced induction vehicles, the amount of boost that can ultimately be used is limited by the constraints of the engine and injector capacity. When OEM injectors reach their maximum capacity, they can no longer flow any additional fuel for higher boost levels; Therefore larger primary injectors can be installed in the factory location and be controlled by an injector upgrade specific program of the VPC, PFC F-CON, or the F-CON S system...
|
|
|
STP Fuel Injector Cleaner Value Pack
Contains concentrated detergents that help dissolve and remove harmful carbon, gum and varnish deposits on fuel injectors. Without cleaning, deposits can lead to harsh starts, lost acceleration and rough idling. This product is safe for all gasoline engines.
|
|
|
Test fuel injection systems on most GMs, including GM TBI, Ford, Chrysler, and Jeep vechiles. Also works on imports, including CIS and CISE fuel systems. With this kit you can diagnose fuel-rlated problems, such as weak fuel pump or restricted fuel filter, and perform lead-down tests. Kit includes 0 -100 psi fuel pressure gauge and 35 of the popular OTC fuel injection adapters, each equipped with a quick-connect Schrader valve. Replacement seal kit also included.
|
|
|
Product Description: BECK ARNLEY FUEL INJECTOR, NEW -- A High Quality, Direct-Fit OEM Replacement Fuel Injector
|
|
|
Using Patented technology the On-Car Injector Flow Bench will easily locate the cause of these common symptoms: Rough Idle Hesitation Surges Misfires Intermittents and Emission Failures. Test Injectors without Removal Fast Easy Hook-up Red
|
|
|
|
|
|
Each of our fuel injectors are an OEM unit and not an aftermarket replacement, providing you with premium products that look, feel,and operate exactly like the original units. In addition, each unit is hand built by our ASE certified technicians to ensure unrivaled quality and performance. Our remanufacturing process includes: -Cleaning and degreasing of the fuel injector -Removal of external components -Ultrasonic cleaning -Extensive injector testing, including Electrical resistance test, reverse/back...
|
|
|
The electronic fuel injector [injection valve] is the termination point for the entire fuel delivery system. Consequently, there is a very small allowable variance in the quantity and spray pattern of the fuel delivered. Failure of this valve will result in difficult idle, poor performance and poor mileage. Python Fuel Injectors are completely disassembled and remanufactured with all new internal component parts. Lifetime warranty.
|
|
|
Injector Advertised Flow Rate (lbs/hr): 42 lbs./hr. Driver Type: 12 V saturated circuit. Injector Plug Style: Bosch/Amp-style. Wiring Harness Included: No. O-Rings Included: Yes. Sold as a set of 8.
|
|
|
Features and Benefits: Throttle body injection adapter included Works on both throttle body and multiport fuel injectors Checks and balances fuel injectors Tests fuel injector coil windings under load and detects intermittent fuel injector coil faults Fuel injectors can pass a resistance test but still fail under load. Adjustable current output. Works on both throttle body and multiport fuel injectors.
|
|
|
Speedstar components were designed to be used together as a complete system. Creating a combination not specified can adversely affect the performance of your motorcycle and may even be harmful to the engine. Components which affect emissions are for closed-circuit use only
|
|
|
3M Multi-Port Fuel Injector Cleaner
Restores injector efficiency and improves fuel atomization. Applicable to multi-port and throttle body in fuel injection systems. Safe for oxygen sensor and catalytic converter equipped vehicles. Recommended for professional use only. Applicable to gasoline engines only.
|
|
|
OTC Fuel Injector Canister-type Cleaner
The gauges large dial face is easy to read through the complete range of 0-100 PSI (0-7 bar). The canister holds up to 18 fluid oz.; its brass and aluminum construction minimizes the possibility of failure. Comes with an under-hood hanger attachment and 72 in. hose. Works with all OTC fuel injection system adapters. Decarbonize intake and combustion systems by using with the No. 7666 decarbonizing adapter. No. 7904 D-Karbonizer treatment. OTC No. 7000 Pro Inject-R Kleen fluid is used for injector...
|
|
|
Fuel injectors can pass a resistance test, but still fail under load. Adjustable current output. Works on both throttle body, and multiport fuel injectors.
|
|
|
OTC has designed this nozzle puller to remove pencil nozzles used in many agricultural and construction engines.
|
|
|
|
|
|
|
|
|
GUMOUT CARBURETOR & FUEL. INJECTOR CLEANER. *12 oz. *Regular us cleans carburetor. & fuel injectors. *Treats up to 21 gallons. of fuel. *Contains no alcohol. *Plastic bottle. *Discovery CON, NBR, SUP, HWU.
|
|
|
CRC Fuel Therapy™ Fuel Injector Cleaner Plus - 05232
|
|
|
1975-1978: All Submodels; All Engines;.
|
|
|
Ford Delphi 6.9L 1983---1987 Fuel Injectors************Core None**************** (II-6760301)
|
|
|
|
|
(US)
