|
HTC HRS-10G Mobile Base for Delta Unisaw Table Saw with 52-Inch Unifence and Jet JTAS Table Saw with 50-Inch Xacta Fence
Keep your shop floor clear with HTC's Mobile Base System. The HTC Mobile Base provides a solid, stable stance that requires no tilting or adjusting, and also allows you to quickly move it when not in use. You can reposition the base for cutting long stock, as well as freeing up space on your shops floor. With this base your machine is held 3/4 inches off the floor at all times, eliminating the need to recalibrate those important machine setting that can be thrown off by raising and lowering the machine. This...
|
|
|
Delta 36-L352 10-Inch Unisaw Table Saw with 52-Inch Biesemeyer Fence System, 3 Horsepower, 230 Volts, 1 Phase
Single-Cast Trunnion System - Results in incredible vibration control providing continuous smooth operation and dependable accuracy. Dual Front Cranks - Make adjusting blade height and blade bevel easy, accurate, and repeatable in all your operations. Bevel Dial - Allows fine tuning of the blade bevel with ease and provides accuracy you can trust to within 1/4 degree. Cabinet Construction - Consists of a large cast-iron base providing stability and solid footing. Improved Table-Top Geometry ...
|
$2,999-$3,299
See 11 Stores
|
|
|
|
|
Delta 36-716B Left Tilt Hybrid Saw w/ Unisaw Fence, 30 Rail Unvl Tableboard
* Left tilting blade tilts away from fence. * Side table board included. * 45° and 90° bevel stops adjustable from the table top; deluxe miter gauge. * Oversized on/off switch with full overload protection. * Motor: 1-3/4 HP, 120V, 60 hz (240V capable). * Arbor Size: 5/8" (16 mm). * Blade Diameter: 10" (254 mm). * Blade Speed: 3000 RPM. * Max Rip To Right Of Blade: 30" (762); 50" (1270 mm). * Max Rip To Left Of Blade: 13-1/2" (343 mm). * Depth Of Cut At 45 Degrees: 2-1/8" (54 mm). * Depth...
|
$1,005-$1,089
See 4 Stores
|
|
Delta 36-L552 Unisaw Cabinet Table Saw
Notes: The Delta 36-L552 Unisaw left tilt cabinet table saw features a 10" cutting capacity that is powered by a 5 hp motor. Includes a 36" Biesemeyer fence and table extension. The saw comes with a five year warranty.
|
$2,874-$3,499
See 7 Stores
|
|
Designed for use with the DELTA Left Tilt Unisaw Table Saw and the Grizzly 1023SL, the Biesemeyer 78-431 T-square Anti-kickback Snap-in Spreader increases table saw safety. An ideal device to reduce dangerous kickbacks, this spreader is easily removed and replaced when performing non-through cuts.
|
|
|
Delta Biesemeyer 78-961 T-Square Anti-Kickback Snap-In Spreader Unisaw-Right Tilt Table Saw. At last, a safety device for your table saw that's a snap to put on and remove. This easy-to-use companion to the T-Square BladeGuard and other over arm blade guards can be snapped into place and removed in seconds. No nuts, bolts or wrenches, no time consuming installation or removal... and your new Snap-In Spreader will always be in perfect alignment with your saw blade.
|
|
|
T-Square Anti-Kickback Snap-In Spreader For Delta Left Tilt Unisaw Table Saw
Delta 78-431 Biesemeyer T-Square, Anti-Kickback, Snap-In Spreader, Unisaw (Left Tilt). Increase table saw safety by adding our anti-kickback snap-in spreader. Designed for use with over arm guards for through-cutting operations, the snap-in design allows quick removal for dado cutting. Reduces dangerous kickbacks, this spreader snaps on instantly and removes easily from 36-820L, 36-821L, and other Left-Tilt Unisaws. Includes one snap-in spreader.
|
|
|
|
|
|
HTC HRS-10-X Mobile Base for Delta 30-Inch Unisaw Table Saw and Jet JTAS10 Table Saw
Keep your shop floor clear with HTC's Mobile Base System. The HTC Mobile Base provides a solid, stable stance that requires no tilting or adjusting, and also allows you to quickly move it when not in use. You can reposition the base for cutting long stock, as well as freeing up space on your shops floor. With this base your machine is held 3/4 inches off the floor at all times, eliminating the need to recalibrate those important machine setting that can be thrown off by raising and lowering the machine. This...
|
|
|
Delta 36-L336, 3 HP Unisaw Cabinet Table Saw
The 36-L336 includes 3 HP, 220V, 1 Phase, 60 Hz motor, Black precision BIESEMEYER fence and tube, Black precision BIESEMEYER fence body, UNISAW black table board 36" BIESEMEYER fence, Black 2" x 2" x 34-1/4" fence legs, BIESEMEYER standard accessory drawer. Bi-Level Dust Extraction for improved dust collection. Single-Cast Trunnion System provides increased accuracy. Sure-Lock Dual Front Cranks provides convenient access to dual front cranks. Precision Bevel Gauge for ease of visibility. Tool...
|
$2,874-$3,175
See 15 Stores
|
|
Provides minimal clearance to prevent chipping and splintering materials
|
|
|
Delta 78-9450 Biesemeyer Rear Outfeed Unisaw Table at Tools Plus
For the past 30 years, Tools-Plus has committed itself to carrying the best hand tools, power tools, woodworking machinery, and accessories like the Delta 78-9450 Biesemeyer Rear Outfeed Unisaw Table above.
|
|
|
Features Fits Delta Right Tilt Unisaws and Contractor's Saws. Standard replacing for missed or damaged inserts. Rear stick to foreclose lifting. Specifications Fits Delta Right Tilt Unisaws and Contractor's Saws Standard replacing for missed or damaged inserts Rear stick to foreclose lifting.
|
|
|
Delta 34-976 Deluxe Uniguard Table Saw Blade Guard
Product Description This Deluxe Uniguard Table Saw Blade Guard from Delta (34-976) works with Delta's 10" Unisaws and Contractor's Saws. This blade guard does not have to be removed for non-through cutting operations. The overhead design means there is no mounting bracket behind the blade to interfere with dado cutting or molding operations. A separate, removable splitter with anti-kickback pawls is included for use during through-cutting, allowing safer operation. The U-shaped support arm allows...
|
|
|
Zero-Clearance Table Saw Inserts, Miter Saw Inserts, & Universal Sheets. Manufactured in the U.S.A. by Leecraft. Click on Part Number for More Detail.
|
|
|
|
|
|
36-861 Delta Standard Table Saw insert for 10 inch Unisaw with Left Tilt
|
|
|
Delta 36-L53L 5 HP 3 Phase Left Tilt Unisaw W/ LVC (Saw Only)
* Widely-spaced, massive cast-iron trunnions support the husky saw carriage and are completely adjustable to ensure perfect alignment. * Precision-ground, stress-proof arbor is flanged-faced after assembly for accuracy. * Positive traction, V-belt drive operates between two lifetime ball bearings to eliminate vibration and assures smooth operation. * Cast-iron table is T-Slotted on both sides of blade to hold AUTO-SET® Miter gauge securely. * Includes built-in adjustable 90° and 45° stops, large...
|
$1,815-$1,889
See 3 Stores
|
|
Constructed of phenolic material and designed for DELTA left-tilt unisaws and contractor saws, the DELTA 36-862 Zero Clearance Table Insert provides a clean, chip-free cut. This insert provides for minimal clearance, giving the maximum support to materials being cut while greatly reducing the amount of chipping and splintering on the underside of the workpiece. Other features include four leveling screws and a width adjusting screw for a tight, flush fit.
|
|
|
Delta 34-154 Standard Table Insert for Right Tilt Unisaws and Contractors Saws
Delta 34-154 Standard Table Insert for Right Tilt Unisaws and Contractors Saws. This table insert is the standard insert for Delta Right Tilt Unisaws and Contractor's Saws. It is included as standard equipment and is sold here as a replacement for missing or damaged inserts. Installs easily with stabilizing pin in back to prevent lifting. Includes one table insert.
|
|
|
Delta Unisaw 3HP Left Tilt
Includes left tilt, 3HP, single phase 230 Volt, TEFC motor with full voltage magnetic starter; 50" BIESEMEYER commercial fence system; carbide-tipped 50 tooth ATB&R saw blade; right extension table; adjustable steel support legs; two 10" cast-iron extension wings; standard insert; miter gauge; motor cover; 4" dust connector; and blade guard.
|
$1,999-$1,999
See 3 Stores
|
|
Delta 50-302 Unisaw Out Feed Table at Tools Plus
31" x 34" folding table. With support legs. Fits Delta's unisaw and cabinet saw line. Adapts to any brand cabinet saw. 2 piece laminated table.
|
|
|
Available in 30", standard right hand rip capacities for cutting a variety of panel sizes. Easy-gliding fence body to handle quick, repetitive cut-off work, precision ripping and squaring cuts. Three-point locking system and hairline pointer with built-in steel tape to assure fence is paralle to blade and accurate to within 1/64 of an inch. Ripping capability both to the right and left of blade. Elimination of hand-held tape. Universal mounting for attaching to almost any table saw. Ruggedly...
|
|
|
10" Blade, 5/8" dia. 0° - 45° tilting arbor, 5 HP belt driven arbor, 50" max rip cap., 12" max. rip cap. to left of blade.
|
|
(US)
