Crown Molding-Maple 48

1-1/4 CUT DIA CROWN MOLDING BITS"

1/2 SHANK DIA CROWN MOLDING BITS"

Available in Maple, Oak, or Cherry.

Available in 48' lengths. * Please note there are additional shipping charges on the 95' molding due to the length. We will add these to your order when we process your order internally.

Available in 48' lengths. * Please note there are additional shipping charges on the 95' molding due to the length. We will add these to your order when we process your order internally.

Available in 48' lengths. * Please note there are additional shipping charges on the 95' molding due to the length. We will add these to your order when we process your order internally.

Available in 48' lengths. * Please note there are additional shipping charges on the 95' molding due to the length. We will add these to your order when we process your order internally.

Available in 48' lengths. * Please note there are additional shipping charges on the 95' molding due to the length. We will add these to your order when we process your order internally.

Crown Molding & Trim

Completes Installtion Of Left & Right Crown Moldings

This stencil consists of 3 layers with the following dimensions: 14" W x 3.5" H. This popular crown molding is perfect to stencil at the ceiling instead of using wood molding.

Moldings may be cut, nailed, and basically installed the same way as any wood molding. A polyurethane adhesive should be beaded along the touching edges of the wall/ceiling and between joints, and then a few small nails to hold in place while the adhesive sets.

Moldings may be cut, nailed, and basically installed the same way as any wood molding. A polyurethane adhesive should be beaded along the touching edges of the wall/ceiling and between joints, and then a few small nails to hold in place while the adhesive sets.

Moldings may be cut, nailed, and basically installed the same way as any wood molding. A polyurethane adhesive should be beaded along the touching edges of the wall/ceiling and between joints, and then a few small nails to hold in place while the adhesive sets.

Moldings may be cut, nailed, and basically installed the same way as any wood molding. A polyurethane adhesive should be beaded along the touching edges of the wall/ceiling and between joints, and then a few small nails to hold in place while the adhesive sets.

You can tailor the basic design of our Contemporary Crown Molding to reflect your own tastes. This molding is routed to receive a variety of decorative flat moldings (7400, 7401, 7402 or 7403) that will add personalized character to the crown molding.