Miter Box with Saw

Robert Bosch Tool Corporation ("Seller") warrants to the original purchaser only, that all BOSCH portable and benchtop power tools will be free from defects in material or workmanship for a period of one year from date of purchase. SELLER'S SOLE OBLIGATION AND YOUR EXCLUSIVE REMEDY under this Limited Warranty and, to the extent permitted by law, any warranty or condition implied by law, shall be the repair or replacement of parts, without charge, which are defective in material or workmanship and...

First, I am a Bosch fan. I love their tools as they are comfortable and very well made. This saw is no exception. I am remodeling my basement and using it for everything from framing to trim work. Saw has performed flawlessly thus far(I've had it since June). The dust collection system however is pityfull at best. I knew this when I bought it but it is such a nice saw I didn't care. You will have dust with any miter saw. This is a heavy piece, 65lbs, which is always a tradeoff for durability....

Laser Guide For Miter Saws

Expanded Cutting Capacity: 14” horizontal capacity (nominal); 6 1/2 in. vertical capacity against the fence (base); 6 1/2 in. crown capacity against the fence (45° spring)

12" 15-Amp Sliding Miter Saw

The DEWALT Heavy-Duty Miter Saw Stand offers large-capacity material support without sacrificing portability, so you can make quick, accurate cuts with ease. This stand features a uni...

12" Compound Miter Saw - 3912. Quick-Action Clamp - BB1200. 40-Tooth Carbide Blade - 2 610 910 836. Blade & Stop Wrench - 2 610 910 828. Fence & Base Wrench - 2 610 355 777. Directional Dust Chute - 2 610 910 845. Dust Bag - BB1205

10-in Dual-Bevel Slide Miter Saw - 4410. Premium 60-Tooth Thin-Kerf Carbide-Tipped Blade. Wrench Set. Tool-Free Vertical Work Clamp - MS1226. Dust Bag - MS1225

The Bosch 4310 is a 10-Inch Dual Bevel Slide Miter Saw. The Bosch 10-Inch Dual Bevel Slide Miter Saw with Upfront Controls is the professional-grade choice for all your construction needs. Features: Up front controls-All-metal bevel lock lever and range selector located upfront for quick and easy bevel settings without reaching behind the saw. Micro-fine miter adjustment- For fractional measurements outside of miter detents Large 22-3/4-Inch Base with Intergated Base Extensions - Extends material...

Amperage: 15. Arbor Size: 5/8". At 0/0 Max Height =: 3-5/8" x 12". At 45/0 Max Height =: 2" x 12". At 45/45 Max Height =: 1-1/4" x 8-1/2". Base Molding - Against Fence: 3-5/8". Bevel Angle Range: 47° left and 46° right. Bevel Stops: 0°, 33.9°, 45° left and right. Blade Diameter: 10". Crown Molding - Angled Against Fence: 6". Crown Molding - Laying Flat: 31.6° stops up to 10-1/4". Height: 19". Length: 37-1/4". Max. Tool HP: 3.0. Miter Detents: 10. No Load RPM: 4,800. Rating: 120V....

Bosch. Powerful 15 Amp motor, 3.3 max. tool HP. Crown miting detents 31.6 degree miter and 33.9 degree bevel detents for quick, accurate, crown cuts. Large 25″ aluminum base with 3-1/4″ sliding extension for 28-1/4″ total length provides extra support. Speed-track sliding fence system. Base and fence slide independently. Tall 5-1/8″ sliding fence for easy bevel setups and increased crown molding cutting capacities. Exclusive wedge and slot miter detent system -consistent precise and accurate...

Miter Saw Laser System

10" Compund Miter Saw

This miter saw stand is state of the art stand for use with all miter saws, compound slide saws and even abrasive chop saws.

Miter Saw

15 Amp Motor, 3,800 RPM, 3 HP (Max). Combination Dust Chute & Vac Adaptor for 1-1/4 and 35 mm hoses. Glide Movement Controller for personalized control. Patented Axial-Glide System. Glide Lock locks system in place for cutting and transport. Two 33.9 Bevel Stops. High Visibility Dual-Bevel Scales 0-47 left and right. Stable tip-resistant base. 52 L /60 R Miter Range + 10 Adjustable Miter Detents for maximum flexibility and capacity. Ergonomic Soft-trip Ambidextrous Trigger Handle for Maximum Comfort...

Bosch power tools SEPTLS1144410L Miter Saws - 4410L

STANLEY 20-600 MITER BOX W/SAW Miter Box With Saw.

BOSCH T3-B MITER SAW STAND Miter Saw Stand.

BOSCH 4405 10" COMPOUND MITER SAW 10" Slide Compound Miter Saw.

BOSCH 5412 12" MITER SAW 12" Dual Bevel Slide Compound Miter Saw with Laser.

With a fine cut and 42 tpi, this is especially designed for creating small picture frames and detailed crafts! Cuts material up to 2" wide and 15/16" thick at 30, 45 and 90 degree angles.

When fine tuning miters, a little error can add up to a lot of air in your joints. But this easy-to-read digital gauge solves the problem by furnishing any miter saw with ultra-fine 0.05 resolution within +/- 0.001 accuracy. Unlike the gauge on your saw,

Jorgensen High Impact Plastic Miter Box With 14 Backsaw It Will Produce Fixed 45 Degree & 90 Degree Angles & 45 Degree Face Miter Cuts Attractive Display Box.

Master Mechanic 10 Sliding Miter Saw With Laser D-Handle With Soft Grip Vertical Wood Clamp 2 Extension Wings AC Laser 15A 5000 RPM Motor 10 Blade Diameter...

High impact plastic miter box. Includes 14" back saw.

Powerful 15 Amp motor

To support long workpieces, we've designed a pair of extension wings that attach to the ends of the station case. For portability, these wings tuck away inside the case. And when stored in the case, the wings provide built-in handles to make it easy to lift and move the miter saw, station and all.

6-1/2in. plastic miter box with ultra thin kerf saw .008in kerf, 32TPI, 4-1/2in. length, 7/16in. depth. Cuts 30, 45, 90 degree angles

Aluminum miter box with 1/16, 3/32, 1/8, 5/32, 3/16 and 1/4 inch slots to hold narrow strips of wood or metal. Two 45 degree and one 90 degree cutting slots, machined for accuracy. 3/4 inch x 1-3/4 inch capacity

The miter station pictured incorporates a pair of extension wings that attach to the ends of the station case. For portability, the wings tuck away inside the case. When stored in the case, the wings provide built-in handles to make it easy to lift and move the miter saw, station and all.

Aluminum miter box with 1/16, 3/32, 1/8, 5/32, 3/16 and 1/4 inch slots to hold narrow strips of wood or metal. Two 45 degree and one 90 degree cutting slots, machined for accuracy. 3/4 inch x 1-3/4 inch capacity. 5-1/4 inches long. Includes handle and 1-1/4 inches deep, 5 inches long, 24 tpi steel blade.

Overview6-1/2in. aluminum miter box has thin slots for 30, 45, 90 degree angle accurate cuts with Deluxe Handle 35-560 fine kerf saw. Saw Specs-24TPI, .010in. Kerf, 6-1/2in. long x 1-3/16in. deep

For delicate sawing and mitering of metal, balsa wood, plastic, and other materials.

Constructed of high-impact material for long life. Cuts on 22-1/2 , 45 , and 90 angles. Molded lip on base edge reduces twisting. Base can be mounted to work top. Base design and cam ring secure work for accurate cuts. Cams store in base for easy storage. 2 cam pins and 14 IN backsaw included.

Super thin kerf Miter Saw cuts on the pull stroke for splinter free, precision cuts. 3-1/2" wide Miter Box cuts 45º left and right as well as 90º. This is a great miter cutting combination!

Miter Saw Laser Guide Miter saw laser guide gives a clear line left of cut. Easy-to-install - replaces the outside washer on a miter saw. Automatic On/Off - activated when spun over 400 RPM. Self-calibrating - sits flush against the blade for an accurate line. Battery life: 1.5 hours or 5000 cuts. Diode life: 3000 hours or 2 million cuts. Does not fit Bosch, Ridgid, and Pro Tech miter saws.

Set your miter saw’s cutting angles to a super-fine .05 degrees with an accuracy within +/-0.001”! Slot adjuster and locking system allows the unit to fit all kinds of miter slots from 5/16” to 7/8” wide.

Width from roller to roller: 42-1/8" ,Extended width from roller to roller: 66-1/8" ,Height from ground to top of rollers: 32-1/2" ,Extended height from ground to top of rollers: 39-3/8" ,Weight capacity: 220 lbs

Bench top, table top, miniature style chop saws (also known as cut-off saws) are available in this section.

Intended use: Sawing Dimensions: 13 inches high x 17.5 inches long x 13.3 inches wide Materials: Metal, plastic Model No: 70705 Color: Blue Size: 8.25-inch

Hotwire, Foam Cutter, Hot wire, Handheld or Table top Custom sizes also available

Minimum width: 49" wide. Maximum width: 79" wide. T-track length: 17 3/8". Roller vertical adjustment: 7". Roller diameter: 1 1/2". Roller length: 9 1/2". Distance floor to top of T-track: 32 1/4". Footprint: 17 1/2" deep x 54" wide. Wheel diameter: 3 1/2". Net weight: 51 lbs. Approximate shipping weight: 60 lbs.

Heavy-duty miter saw stand for use with most miter saws. Lightweight aluminum construction for stability and easy portability. Quick release mounting brackets allow for quick set-up and tear down. Sliding extension and rollers allow for support of an array of material sizes. 1 year warranty. Sliding extensions allow for 6´ of stable extension.

The Champion Miter Saw positions your stock, even for complex compound cuts, with absolute precision, while the razor sharp, tensioned blades create nearly invisible joints.

Large 8' span from roller to roller - Offset rollers for extra large ripping support - 20" x 30" table top. Approximate shipping charge is $30.00. 11/14/02

Exclusive Wedge-and-Slot Miter Detent System-Consistent and precise miter angles over the life of the tool

Features Powerful 15 Amp motor, 3.3 max. tool HP. Crown miter detents - 31.6◦ Miter and 33.9◦ Bevel detents for quick, accurate, crown cuts. Large 25" aluminum base with 3-1/4 in. sliding extension for 28-1/4 in. total length - Provides extra support. Speed-Track Sliding Fence System - Base and fence slide independently. Tall 5-1/8 in. sliding fence - For easy bevel setups and increased crown molding cutting capacities. Exclusive Wedge-and-Slot Miter Detent System-Consistent and precise miter angles...

Powerful 15 Amp motor, 3.3 max. tool HP. Crown miter detents - 31.6◦ Miter and 33.9◦ Bevel detents for quick, accurate, crown cuts. Large 25" aluminum base with 3-1/4" sliding extension for 28-1/4" total length - Provides extra support. Speed-Track Sliding Fence System - Base and fence slide independently. Tall 5-1/8" sliding fence - For easy bevel setups and increased crown molding cutting capacities. Exclusive Wedge-and-Slot Miter Detent System-Consistent and precise miter angles over the...

Bosch - 12in Dual-Bevel Compound Miter Saw with Upfront Controls

12" Compound Miter Saw 15A, 3 HP, 3800 RPM motor with ball bearing construction for extended life. Two 4-1/2" sliding fences with scales. Slim Track sliding fence system offers additional independent fence and base support. Positive crown molding detent for easy crown molding cuts. Large 25" die-cast aluminum table with cast and machined scales. Left miter range 52, right range 52 miter detents for fast and accurate cuts. 2 sliding base extensions for 40" total length. Two 33.9 bevel stops. Quick...

Bosch 4212 12" Dual-Bevel Compound Miter SawBosch Power Tools and Accessories is one of the divisions within the Robert Bosch Tool Corporation, which is one of the largest power tool and accessory manufacturers in the world. Bosch provides a complete line of corded and cordless power tools and accessories engineered to survive any jobsite and allow professionals to take control of their work.Bosch 4212 12" Dual-Bevel Compound Miter Saw Features:* Upfront bevel lock lever and range selector knob are...

Features Up-Front Controls provide easy and efficient access to miter and bevel angle settings. Includes quick release fence for fast and easy adjustment. Extend material support from 21 inches to 36 inches with dual workpiece supports. Exclusive wedge and slot miter detent system provides consistent and precise miter angles over the life of the tool. Specifications Amperage: 13 Arbor size: 5/8 inch Base molding - laying flat: 12 inches Base molding - angled: 3 1/2 inches Blade diameter: 10 inches...

Up-Front Controls - Exclusive feature provides easy and efficient access to miter and bevel angle settings

Contents: Saw, Quick Action Clamp, Carbide Blade, Blade and Stop Wrench, Fence and Base Wrench, Directional Dust Chute, Dust Bag

15 Amp, 3,800 RPM, 3 HP (Max motor); up front bevel lock lever and range selector knob; multi position main handle locks into 4 positions for comfort and control; microfine adjustment of detented miter angles by up to 2 degrees right or left; large 25 1/2" aluminum base with up to 40" total length; easy read miter and bevel scales; tall 4" fences; miter detent override, for fine miter adjustment; crown miter detents at 31.6 degrees and 33.9 degrees; spindle lock for easy blade changes; includes1...

Large 25" aluminum base with 3-1/4" sliding extension for 28-1/4" total length - Provides extra support

Voltage: 120V. Amperage: 13. Maximum Tool HP: 2.8. No Load Speed: 4,700 RPM. Blade Diameter: 10 Inches. Arbor Size: 5/8 Inch. Base Molding Laying Flat: 12 Inches. Base Molding Angled: 3-1/2 Inches. Bevel Angle Range: 45 left to 0°. Bevel Detent: 33.9° left with positive stops at 0 and 45°. Crown Molding Laying Flat: 10-1/4 Inches. Crown Molding Angled: 4-1/4 Inches - 38°. Miter Angle Range: 52° to left, 60° to right. Miter Detents: 0, 15, 22.

Features Upfront bevel lock lever and range selector knob easily-accessed controls for quick and accurate bevel settings. Multi-positioned main handle easily locks into any of four positions for optimum comfort and control. 15 Amp motor, 4,800 RPM. Crown miter detents — 31.6° miter and 33.9° bevel detents for quick, accurate crown cuts. Dual rail design for superior accuracy. Easily readable bevel and miter scales for easy setting of accurate bevel and miter angles. Electric brake for quick, repetitive...

If you're new to ACME TOOLS, we look forward to the opportunity to serve you; if you're a past customer, as always, we thank you for your business! Your shipping charges and options are presented during the checkout process. If you have any questions or concerns regarding shipping information, please let us know . Right now, our everyday price of $529.99 is 46% off list price - a savings of $456.01 on this 10 In. Dual Bevel Slide Miter Saw! We accept all major credit cards including Mastercard, Visa...

Exclusive Wedge-and-Slot Miter Detent System-Consistent and precise miter angles over the life of the tool

Up Front bevel lock lever and range selector knob — Easily-accessed controls for quick and accurate bevel settings. Arbor mounted laser tracking — Provides accurate laser lines for precision cutting. Microfine miter adjustment knob — For fine adjustment of key (detent) miter angles by up to 2°, left or right. Multi-positioned main handle — Easily locks into any of four positions for optimum comfort and control. Large 21" aluminum base with cast sliding extensions for 37-1/4" total length — Provides...

Features Upfront bevel lock lever and range selector knob allows for easy access to controls for quick and accurate bevel settings. 15 Amp motor, 4,800 RPM. Crown miter detents - 31.6 degree miter and 33.9 degree bevel detents for quick, accurate crown cuts. Easily Readable Bevel and Miter Scales for easy setting of accurate bevel and miter angles. Electric brake for quick, repetitive cuts. Stops blade in seconds. Exclusive Wedge and Slot Miter Detent System for consistent and precise miter angles...

Large 21" aluminum base with cast sliding extensions for 37-1/4" total length - Provides extended grip areas and extra support for longer materials

Bosch 4310 10" Dual Bevel Slide Miter SawBosch 4310 10" Dual Bevel Slide Miter Saw Features:* Miter Saw* Dual bevel slide* Up front controls all metal bevel lock lever and range selector located upfront for quick and easy bevel settings without reaching behind the saw* Micro fine miter adjustment for fractional measurements outside of miter detents* Large 22-3/4" base with integrated base extensions* Extends material support to 37-1/4"* 2 tall 4" x 10" speed track sliding fences for easy bevel cut...

Up-Front Bevel Lock Lever and Range Selector Knob — Easily-accessed controls for quick and accurate bevel settings. Large 25-1/2" Base with Built-In Cast Sliding Extensions for 40" total length. Tall 4-1/2 " Speed-Track Sliding Fences — For easy bevel set-ups and increased crown molding cutting capacities. Built-in Length Stop — For quick repetitive cuts of the same length. Easily Readable Bevel and Miter Scales — For easy setting of accurate bevel and miter angles. Exclusive Wedge-and-Slot...

Heavy-duty 15A, 4800 RPM motor with ball and roller bearing construction. Miter detent override holds miter detent lever away from table for free rotation. 21 IN aluminum base. Sliding extensions for 37-1/4 IN length. 4-1/2 IN tall fence. Dual guide rails for increased accuracy. 25 IN wide sliding base/fence for extra support compound miter cuts. Positive crown moulding bevel stop. Crosscuts to 3-1/2 IN x 12 IN. Miter detents at 0 , 15 , 22.5 , 31.6 , 45 right/left, and 60 right. Miter angle range...

Heavy-duty 15A, 4800 RPM motor with ball and roller bearing construction. Miter detent override holds miter detent lever away from table for free rotation. 21 IN aluminum base. Sliding extensions for 37-1/4 IN length. 4-1/2 IN tall fence. Dual guide rails for increased accuracy. 25 IN wide sliding base/fence for extra support compound miter cuts. Positive crown moulding bevel stop. Crosscuts to 3-1/2 IN x 12 IN. Miter detents at 0 , 15 , 22.5 , 31.6 , 45 right/left, and 60 right. Miter angle range...

Amperage: 15 Amp. Arbor Size: 1". At 0 bevel/0 miter: 4-1/4" x 12-1/2". At 0 miter/ 45 right bevel: 1-3/4" x 12-1/2". At 0 miter/45 left beve: l 2-3/4" x 12-1/2". At 45 miter and 45 right bevel: 2-5/8" x 8-3/4". At 45 miter/ 0 Bevel: 4-1/4" x 8-3/4". At 45 miter/45 left beve:l: 2-3/4" x 8-3/4". Base Molding - Against Fence: 4-1/4" Max. Base Molding - Laying Flat: 12". Bevel Angle Range: 47° to 47°. Bevel Detent: 0°, 33.9°, 45° Left/Right. Bevel Stops: 0°, 33.9°, 45° Left/Right. Blade...

15 Amp, 4,800 RPM, 3 HP (Max motor); up front bevel lock lever and range selector knob; multi position main handle locks into 4 positions for comfort and control; microfine adjustment of detented miter angles by up to 2 degrees right or left; large 22-1/2" aluminum base with up to 37-1/4" total length; easy read miter and bevel scales; tall 4" fences; miter detent override, for fine miter adjustment; crown miter detents at 31.6 degrees and 33.9 degrees; spindle lock for easy blade changes; includes...

Features Powerful 15 Amp motor, 3.3 max. tool HP. Crown miter detents - 31.6◦ Miter and 33.9◦ Bevel detents for quick, accurate, crown cuts. Large 25" aluminum base with 3-1/4 in. sliding extension for 28-1/4 in. total length - Provides extra support. Speed-Track Sliding Fence System - Base and fence slide independently. Tall 5-1/8 in. sliding fence - For easy bevel setups and increased crown molding cutting capacities. Exclusive Wedge-and-Slot Miter Detent System-Consistent and precise miter angles...

Upfront Bevel Lock Lever and Range Selector Knob Easily-accessed controls for quick and accurate bevel settings. Arbor mounted laser tracking Provides accurate laser lines for precision cutting. Multi-Position Main Handle Easily locks into any of four positions for optimum comfort and control. Large 25-1/2 inch Base with Built-In Cast Sliding Extensions for 40" total length. Tall 4-1/2 inch Speed-Track Sliding Fences For easy bevel set-ups and increased crown molding cutting capacities. Built...

Large 21-in Aluminum base with cast sliding extensions for 37-1/4-in total length - Provides extended grip areas and extra support for longer materials

Upfront Bevel Lock Lever and Range Selector Knob Easily-accessed controls for quick and accurate bevel settings. Multi-Position Main Handle Easily locks into any of four positions for optimum comfort and control. Large 25-1/2" Base with Built-In Cast Sliding Extensions for 40" total length. Tall 4-1/2 " Speed-Track Sliding Fences For easy bevel set-ups and increased crown molding cutting capacities. Built-in Length Stop For repetitive cuts of the same length. Easily Readable Bevel and Miter...

Big Blue Volume 10, Page 59 (View PDF) Big Blue Volume 9, Page 47 (View PDF) Big Blue Volume 8, Page 31 (View PDF)

Big Blue Volume 10, Page 59 (View PDF) Big Blue Volume 9, Page 47 (View PDF) Big Blue Volume 8, Page 31 (View PDF)

Features Up-front bevel lock lever and range selector knob easily-accessed controls for quick and accurate bevel settings. Large 25-1/2" base with built-in cast sliding extensions for 40" total length. Tall 4-1/2" speed-track sliding fences for easy bevel set-ups and increased crown molding cutting capacities. Easily readable bevel and miter scales for easy setting of accurate bevel and miter angles. Exclusive wedge-and-slot miter detent system consistent and precise miter angles over the life of...

MITER SAW BRACKET. Bolts Included.