Eemax EX55T "Thermostatic" Electric Tankless Water

The Eemax EX55 "Flow Control" Electric Tankless Water Heater. Recommended cold water feed. Turn on flow .7 GPM, max 2 GPM. Eemax EX55 "Flow Control" Electric Tankless Water Heater Applications: Kitchen Sinks Bar Sinks Utility Sinks Manufacturing Facilities Modular Buildings and Tenant Spaces Hand Set Shower (.7 - 2 GPM) Eemax EX55 "Flow Control" Electric Tankless Water Heater Features: On Demand Hot Water - no delay. Cut Energy Waste -flow switch activates heater only on demand (no standby heat loss). Continuous Hot Water - no storage capacity to run out. Reduces Installation Cost - no T & P relief valve needed (check local codes). Easy Installation - only one cold water line need be brought to lavatory. Mounts on wall at point-of-use. Hands Free - sensor and metering faucet compatible. Prevents Legionella Bacteria Growth Designed for Durability - constructed of high strength reinforced "EN

The Eemax EX55T "Thermostatic" Electric Tankless Water Heater. To serve as a booster, eliminating long pipe runs, boosters for dishwashers and sanitation. Applications where precise temperature control is essential such as schools, hospitals and laboratories. Meets ANSI Z358.1 tepid water requirements for emergency eyewash. Anti-scald protection. Recommended for hot or cold water feed, microprocessor temperature control for accurate temperature. Fitted with 1/2" copper pipe compression fittings. Standard range 100 to 140°F. Turn on .7 GPM, max 2 GPM. Eemax EX55T "Thermostatic" Electric Tankless Water Heater Applications: Boosters (to 180° F) Metering and sensor faucet compatible Low volume shower handset (.7 - 2 GPM) Schools/Hospitals/Nursing Homes/Laboratories Eliminate wait for hot water, long pipe runs Maintains accurate temperature continuously +/- 0.5°F Eemax EX55T "Thermostatic" Electric Tankless Water Heater Features: Fully Adjusta

Easy Installation - only one cold or hot water line need be brought to installation - integral compression fittings for 1/2" pipe (5/8° OD) on bottom (no sweat connections).

Appliances / Household Appliances / Tankless Water Heater / Eemax / EX55T / Fuel Type - Electric;

Appliances / Household Appliances / Tankless Water Heater / Eemax / EX55TDI / Special Features - De-Ionizing Unit;

On Demand Hot Water - no delay. Cut Energy Waste -flow switch activates heater only on demand (no standby heat loss). Endless Hot Water - no storage capacity to run out. Reduces Installation Cost - no T & P relief valve needed (check local codes). Optional Flow Restricting Aerator - ensures proper temperature rise. (specify flow 0.5 GPM - 2.0 GPM). Easy Installation - only one cold water line need be brought to installation. Integral ½" compression fittings(5/8' OD) at bottom of unit (no sweat...

Fully Adjustable Temperature Range between 100-140°F. Special settings of higher or lower range available upon request. Eliminate costly mixing valves. On Demand Hot Water - no delay. Continuous Hot Water - no storage capacity to run out. Reduces Installation Cost - no T & P relief valve needed (check local codes). Easy Installation - only one cold water line need be brought to installation - integral ½" compression fittings on bottom (no sweat connections). Cut Energy Waste -flow switch activates...

Eemax Electric "Digital Readout" Tankless Water Heater Single Module Fitted with 1 2" copper pipe compression fittings with rear or bottom entry electric For hot or cold water feed Size 10"x9"x3" External thermostatic control and digital temperature readout kW 5 5 Volts 240V Amps 23A Temp rise at 0 5 GPM 25 degrees F Temp rise at 0 75 GPM 50 degrees F Temp rise at 1 0 GPM 38 degrees F Temp rise at 1 5 GPM 25 degrees F Temp rise at 2 0 GPM 19 degrees F Recommended wire size 10AWG

* Fully Adjustable Temperature Range between 100-140°F. Special settings of higher or lower range available upon request. * Eliminate costly mixing valves. * On Demand Hot Water - no delay. * Continuous Hot Water - no storage capacity to run out. * Reduces Installation Cost - no T & P relief valve needed (check local codes). * Easy Installation - only one cold water line need be brought to installation - integral 1/2" compression fittings on bottom (no sweat connections). * Cut Energy Waste...

* On Demand Hot Water - no delay. * Cut Energy Waste -flow switch activates heater only on demand (no standby heat loss). * Continuous Hot Water - no storage capacity to run out. * Reduces Installation Cost - no T & P relief valve needed (check local codes). * Easy Installation - only one cold water line need be brought to lavatory. * Mounts on wall at point-of-use. * Hands Free - sensor and metering faucet compatible. * Prevents Legionella Bacteria Growth. * Designed for Durability - constructed...

* Fully Adjustable Temperature Range between 100-140°F. Special settings of higher or lower range available upon request. * Eliminate costly mixing valves. * On Demand Hot Water - no delay. * Continuous Hot Water - no storage capacity to run out. * Reduces Installation Cost - no T & P relief valve needed (check local codes). * Easy Installation - only one cold water line need be brought to installation - integral 1/2" compression fittings on bottom (no sweat connections). * Cut Energy Waste...

Hot or cold water feed. Microprocessor temperature control for accurate temperature. 1/2" copper pipe compression fittings with rear or bottom electric entry. Size: 10.75" x 5.25" x 2.125". Volts: 240V. kW: 5.5. AMPS: 23A. Temp rise at .5 GPM: 75 degrees F. Temp rise at .75 GPM: 50 degrees F. Temp rise at 1.0 GPM: 38 degrees F. Temp rise at 1.5 GPM: 25 degrees F. Temp rise at 2.0 GPM: 19 degrees F. Recommended wire size: 10AWG.

* Photo Processing. * Schools. * Nursing Homes. * Laboratories. * Showers. * Boosters(to 180° sanitation). * Anti scald Protection. * Residential. * For hot or cold water feed. * Size: 10"x9"x3". * External thermostatic control and digital temperature readout. * kw: 5.5. * Volts: 240V (This unit can be used at 208V with 25% reduced output). * Amps: 23A. * Recommended wire size: 10AWG. * Temp rise at 1.0 GPM: 38°F. * Temp rise at 2.0 GPM: 19°F. * Temp rise at 3.0 GPM: 13°F. * Weight...

* Dimensions - 10-3/4" x 5-1/4" x 3". * Weight - 10lbs. * KW - 5.5kW. * Volts 240V. * Amps 23A. * Recommended Wire 10AWG. * Rise at 0.5 GPM - 75°F. * Rise at 1.0 GPM - 38°F. * Rise at 2.0 GPM - 19°F. * Bottom water connections, 1/2" compression fitting (type 316 stainless steel).

The Eemax EX55 "Flow Control" Electric Tankless Water Heater. Recommended cold water feed. Turn on flow .7 GPM, max 2 GPM. Eemax EX55 "Flow Control" Electric Tankless Water Heater Applications: Kitchen Sinks Bar Sinks Utility Sinks Manufacturing Facilities Modular Buildings and Tenant Spaces Hand Set Shower (.7 - 2 GPM) Eemax EX55 "Flow Control" Electric Tankless Water Heater Features: On Demand Hot Water - no delay. Cut Energy Waste -flow switch activates heater only on demand (no standby heat loss). Continuous Hot Water - no storage capacity to run out. Reduces Installation Cost - no T & P relief valve needed (check local codes). Easy Installation - only one cold water line need be brought to lavatory. Mounts on wall at point-of-use. Hands Free - sensor and metering faucet compatible. Prevents Legionella Bacteria Growth Designed for Durability - constructed of high strength reinforced "EN

The Eemax EX55T "Thermostatic" Electric Tankless Water Heater. To serve as a booster, eliminating long pipe runs, boosters for dishwashers and sanitation. Applications where precise temperature control is essential such as schools, hospitals and laboratories. Meets ANSI Z358.1 tepid water requirements for emergency eyewash. Anti-scald protection. Recommended for hot or cold water feed, microprocessor temperature control for accurate temperature. Fitted with 1/2" copper pipe compression fittings. Standard range 100 to 140°F. Turn on .7 GPM, max 2 GPM. Eemax EX55T "Thermostatic" Electric Tankless Water Heater Applications: Boosters (to 180° F) Metering and sensor faucet compatible Low volume shower handset (.7 - 2 GPM) Schools/Hospitals/Nursing Homes/Laboratories Eliminate wait for hot water, long pipe runs Maintains accurate temperature continuously +/- 0.5°F Eemax EX55T "Thermostatic" Electric Tankless Water Heater Features: Fully Adjusta

Easy Installation - only one cold or hot water line need be brought to installation - integral compression fittings for 1/2" pipe (5/8° OD) on bottom (no sweat connections).

Appliances / Household Appliances / Tankless Water Heater / Eemax / EX55T / Fuel Type - Electric;

Appliances / Household Appliances / Tankless Water Heater / Eemax / EX55TDI / Special Features - De-Ionizing Unit;

On Demand Hot Water - no delay. Cut Energy Waste -flow switch activates heater only on demand (no standby heat loss). Endless Hot Water - no storage capacity to run out. Reduces Installation Cost - no T & P relief valve needed (check local codes). Optional Flow Restricting Aerator - ensures proper temperature rise. (specify flow 0.5 GPM - 2.0 GPM). Easy Installation - only one cold water line need be brought to installation. Integral ½" compression fittings(5/8' OD) at bottom of unit (no sweat...

Fully Adjustable Temperature Range between 100-140°F. Special settings of higher or lower range available upon request. Eliminate costly mixing valves. On Demand Hot Water - no delay. Continuous Hot Water - no storage capacity to run out. Reduces Installation Cost - no T & P relief valve needed (check local codes). Easy Installation - only one cold water line need be brought to installation - integral ½" compression fittings on bottom (no sweat connections). Cut Energy Waste -flow switch activates...

Easy Installation - only one cold water line need be brought to installation - integral ¹⁄₂” pipe compression fittings (5/8" OD) at bottom of unit (no sweat connections). Mounts on wall. 3/8" Compression fittings available with option SL