EX65T, Eemax 240V 27A Thermostatic Electric Tankless Water Heater - Bottom Feed

The Eemax EX65T "Thermostatic" Electric Tankless Water Heater.To serve as a booster, eliminating long pipe runs, boosters for dishwashers and sanitation. Applications where precise temperature control is essential such as schools, hospitals and laboratories. Meets ANSI Z358.1 tepid water requirements for emergency eyewash. Anti-scald protection.Recommended for hot or cold water feed, microprocessor temperature control for accurate temperature. Fitted with 1/2" copper pipe compression fittings. Standard range...

* Kitchen Sinks. * Bar Sinks. * Utility Sinks. * Manufacturing Facilities. * Modular Buildings and Tenant Spaces. * Dual Handwash Sinks (DL). * Hand Set Shower (.7 - 2 GPM). * On Demand Hot Water - no delay. * Cut Energy Waste -flow switch activates heater only on demand (no standby heat loss). * Continuous Hot Water - no storage capacity to run out. * Reduces Installation Cost - no T & P relief valve needed (check local codes). * Easy Installation - only one cold water line need be brought...

Eemax EX65T Thermostatic Tankless Water Heater 6.5kW 240V (Can be used on 208 V with 25% reduced output)

Appliances / Household Appliances / Tankless Water Heater / Eemax / EX65 / Special Features - Flow Controlled;

Appliances / Household Appliances / Tankless Water Heater / Eemax / EX65TDR / Fuel Type - Electric;

Eemax 240V 27A Closed Outlet Flow Controlled Electric Tankless Water Heater - Bottom Feed

Flow Control Water Heater 240 Volt Outlet / 6.5 kW Ideal for the Following Uses: Low Volume Hand Shower Multiple Sinks Kitchen Sinks Dimensions: 10.75" x 5.25" x 2.78" Weight: 3 lbs. Cover: ABS UL rated 94Vo. Color: White Element: Replaceable cartridge insert Fittings: 1/2" pipe (5/8"OD) compression at bottom of unit or 3/8" compression (SL) Operating Pressure: min 25 PSI, max 150 PSI

Eemax Electric "Digital Readout" Tankless Water Heater Single Module Fitted with 1 2" copper pipe compression fittings with rear or bottom entry electric For hot or cold water feed Size 10"x9"x3" External thermostatic control and digital temperature readout kW 6 5 Volts 240V Amps 27A Temp rise at 0 5 GPM 89 degrees F Temp rise at 0 75 GPM 59 degrees F Temp rise at 1 0 GPM 44 degrees F Temp rise at 1 5 GPM 30 degrees F Temp rise at 2 0 GPM 22 degrees F Recommended wire size 10AWG

Fitted with 1/2" copper pipe compression fittings with rear or bottom entry electric. For hot or cold water feed. Size: 10"x9"x3". External thermostatic control and digital temperature readout. kW: 6.5. Volts: 240V. Amps: 27A. Temp rise at 0.5 GPM: 89 degrees F. Temp rise at 0.75 GPM: 59 degrees F. Temp rise at 1.0 GPM: 44 degrees F. Temp rise at 1.5 GPM: 30 degrees F. Temp rise at 2.0 GPM: 22 degrees F. Recommended wire size: 10AWG.

* Fully Adjustable Temperature Range between 100-140°F. Special settings of higher or lower range available upon request. * Eliminate costly mixing valves. * On Demand Hot Water - no delay. * Continuous Hot Water - no storage capacity to run out. * Reduces Installation Cost - no T & P relief valve needed (check local codes). * Easy Installation - only one cold water line need be brought to installation - integral 1/2" compression fittings on bottom (no sweat connections). * Cut Energy Waste...

* Photo Processing. * Schools. * Nursing Homes. * Laboratories. * Showers. * Boosters(to 180° sanitation). * Antiscald Protection. * Residential. * For hot or cold water feed. * Size: 10"x9"x3". * External thermostatic control and digital temperature readout. * kw: 6.5. * Volts: 240V (This unit can be used at 208V with 25% reduced output). * Amps: 27A. * Recommended wire size: 10AWG. * Temp rise at 1.0 GPM: 44°F. * Temp rise at 2.0 GPM: 22°F. * Temp rise at 3.0 GPM: 15°F. * Weight...

Easy Installation - only one cold water line need be brought to installation - integral ¹⁄₂” pipe compression fittings (5/8" OD) at bottom of unit (no sweat connections). Mounts on wall. 3/8" compression fittings available. Note: SL

Easy Installation - only one cold or hot water line need be brought to installation - integral compression fittings for 1/2" pipe (5/8° OD) on bottom (no sweat connections).

* On Demand Hot Water - no delay. * Cut Energy Waste -flow switch activates heater only on demand (no standby heat loss). * Continuous Hot Water - no storage capacity to run out. * Reduces Installation Cost - no T & P relief valve needed (check local codes). * Easy Installation - only one cold water line need be brought to lavatory. * Mounts on wall at point-of-use. * Hands Free - sensor and metering faucet compatible. * Prevents Legionella Bacteria Growth. * Designed for Durability - constructed...

The Eemax EX65T Thermostatic Electric Tankless Water Heater. To serve as a booster, eliminating long pipe runs, boosters for dishwashers and sanitation. Applications where precise temperature control is essential such as schools, hospitals and laboratories. Meets ANSI Z358.1 tepid water requirements for emergency eyewash. Anti-scald protection. Recommended for hot or cold water feed, microprocessor temperature control for accurate temperature. Fitted with 1/2 copper pipe compression fittings....

EX = Bottom Water Connection, 1/2 compression fittings. Volts 240V. KW 6.5kW. Amps 27A. Rise at .5 GPM 89F. Rise at .75 GPM 59F. Rise at 1.0 GPM 44F. Rise at 1.5 GPM 30F. Wire Size AWG - 10. Dimensions - 10.75 x 5.25 x 2.125. Weight - 3 lbs. Element - Replaceable cartridge insert.

* Photo Processing. * Schools. * Nursing Homes. * Laboratories. * Showers. * Boosters(to 180° sanitation). * Anti scald Protection. * Residential. * For hot or cold water feed. * Size: 10"x9"x3". * External thermostatic control and digital temperature readout. * kw: 6.5. * Volts: 240V (This unit can be used at 208V with 25% reduced output). * Amps: 27A. * Recommended wire size: 10AWG. * Temp rise at 1.0 GPM: 44°F. * Temp rise at 2.0 GPM: 22°F. * Temp rise at 3.0 GPM: 15°F. * Weight...

* Dimensions - 10-3/4" x 5-1/4" x 3". * Weight - 10lbs. * KW - 6.5kW. * Volts 240V. * Amps 27A. * Recommended Wire 10AWG. * Rise at 0.5 GPM - 89°F. * Rise at 1.0 GPM - 44°F. * Rise at 2.0 GPM - 22°F. * Bottom water connections, 1/2" compression fitting (type 316 stainless steel).

The Eemax EX65T "Thermostatic" Electric Tankless Water Heater.To serve as a booster, eliminating long pipe runs, boosters for dishwashers and sanitation. Applications where precise temperature control is essential such as schools, hospitals and laboratories. Meets ANSI Z358.1 tepid water requirements for emergency eyewash. Anti-scald protection.Recommended for hot or cold water feed, microprocessor temperature control for accurate temperature. Fitted with 1/2" copper pipe compression fittings. Standard range...

* Kitchen Sinks. * Bar Sinks. * Utility Sinks. * Manufacturing Facilities. * Modular Buildings and Tenant Spaces. * Dual Handwash Sinks (DL). * Hand Set Shower (.7 - 2 GPM). * On Demand Hot Water - no delay. * Cut Energy Waste -flow switch activates heater only on demand (no standby heat loss). * Continuous Hot Water - no storage capacity to run out. * Reduces Installation Cost - no T & P relief valve needed (check local codes). * Easy Installation - only one cold water line need be brought...

Eemax EX65T Thermostatic Tankless Water Heater 6.5kW 240V (Can be used on 208 V with 25% reduced output)

Appliances / Household Appliances / Tankless Water Heater / Eemax / EX65 / Special Features - Flow Controlled;

Appliances / Household Appliances / Tankless Water Heater / Eemax / EX65TDR / Fuel Type - Electric;

Eemax 240V 27A Closed Outlet Flow Controlled Electric Tankless Water Heater - Bottom Feed

Flow Control Water Heater 240 Volt Outlet / 6.5 kW Ideal for the Following Uses: Low Volume Hand Shower Multiple Sinks Kitchen Sinks Dimensions: 10.75" x 5.25" x 2.78" Weight: 3 lbs. Cover: ABS UL rated 94Vo. Color: White Element: Replaceable cartridge insert Fittings: 1/2" pipe (5/8"OD) compression at bottom of unit or 3/8" compression (SL) Operating Pressure: min 25 PSI, max 150 PSI

Easy Installation - only one cold or hot water line need be brought to installation - integral compression fittings for 1/2" pipe (5/8° OD) on bottom (no sweat connections).