Craftsman 12 in. Sliding Dual Bevel Compound Miter Saw

Cuts wood up to 4 thick and 12-1/4 wide, XACTA green laser lights the cut line, Priced right, more than tough enough and as precise as you demand!. At 73 lb., the 12 Dual Bevel Sliding Compound Miter Saw is definitely the ?Alpha Male? of Jet's miter saw line. However, that extra weight is used to deliver higher capacities. It has a dual bevel capacity that allows you to angle and stop at 0, 33.9, and 45 degrees left and right. A quick cam miter lock adjusts and stops at 10 different detents from -45 to 60 degrees right. With its blade at 0 degrees, it allows for cuts of material up to 4 thick and 12-1/4 wide and up to 2-1/2 thick and 12-1/4 wide depending on miter and bevel settings. The 12 miter saw has an aluminum table surface that is 22-1/4 wide with a maximum front to back area of 13 at the blade. And it comes with a tool-free clamp and a 12, 60 tooth carbide-tipped blade to get you started as soon as you set up. Made in China/Taiwan. Specifications: Jet Model # JMS-12SCMS Measurem

Milwaukee. Miter Angle Digital Readout- provides repeatable accuracy to 0.1°. Miter Angle Fine Adjust with Detent Override- makes it simple to dial-in precise miter angles. Dual Integral Jobsite Lights- fully illuminate the work piece and cut line from either side of the blade. Powerful 15.0 Amp, 3.3 Max HP Direct Drive Motor- provides increased power for high performance cutting in hard lumber. Constant Power Technology with Soft Start -maintains constant cutting speed under load and decreases...

Dual Slide Rail System allows cutting up to 12 in. wide boards at 90 deg. Adjustable upfront support brackets for extra support of big work pieces Multi-miter 3-position handle lock at 0, 45 deg. (L) and 45 deg. (R) for comfort and control Dual Bevel capacity 48 deg. left and right; 0, 33.9, 45 deg. positive bevel stops Upfront Bevel Lock allows bevel changes without reaching behind unit Tall Sliding Fences provide extra work piece support Telescoping Extension Wings with Stop Block for additional support 10 Positive Miter Stops (0, 15, 22.5, 31.6, 45 deg. L & R, 60 deg. R) 12 in. 60T Carbide-Tipped Blade with 5/8 in. Arbor

Amps: 15.0. No Load Speed: 3,200 RPM. Blade Diameter: 12 Inches. Arbor Size: 5/8 or 1 Inch. Miter Range: 55° Left to 60° Right. Bevel Range: 48° Left to 48° Right. Miter Stops Left: 0°, 15°, 22.5°, 31.6°, 45°, 55°. Miter Stops Right: 0°, 15°, 22.5°, 31.6°, 45°, 60°. Bevel Stops Left: 0°, 15°, 22.5°, 33.85°, 45°, 48°.

Miter Angle Digital Readout - provides repeatable accuracy to 0.1°. Miter Angle Fine Adjust with Detent Override- makes it simple to dial-in precise miter angles. Dual Integral Jobsite Lights- fully illuminate the work piece and cut line from either side of the blade. Powerful 15.0 Amp, 3.3 Max HP Direct Drive Motor- provides increased power for high performance cutting in hard lumber. Constant Power Technology with Soft Start- maintains constant cutting speed under load and decreases start up...

Cuts wood up to 4 thick and 12-1/4 wide, XACTA green laser lights the cut line, Priced right, more than tough enough and as precise as you demand!. At 73 lb., the 12 Dual Bevel Sliding Compound Miter Saw is definitely the ?Alpha Male? of Jet's miter saw line. However, that extra weight is used to deliver higher capacities. It has a dual bevel capacity that allows you to angle and stop at 0, 33.9, and 45 degrees left and right. A quick cam miter lock adjusts and stops at 10 different detents from -45 to 60 degrees right. With its blade at 0 degrees, it allows for cuts of material up to 4 thick and 12-1/4 wide and up to 2-1/2 thick and 12-1/4 wide depending on miter and bevel settings. The 12 miter saw has an aluminum table surface that is 22-1/4 wide with a maximum front to back area of 13 at the blade. And it comes with a tool-free clamp and a 12, 60 tooth carbide-tipped blade to get you started as soon as you set up. Made in China/Taiwan. Specifications: Jet Model # JMS-12SCMS Measurem

Milwaukee. Miter Angle Digital Readout- provides repeatable accuracy to 0.1°. Miter Angle Fine Adjust with Detent Override- makes it simple to dial-in precise miter angles. Dual Integral Jobsite Lights- fully illuminate the work piece and cut line from either side of the blade. Powerful 15.0 Amp, 3.3 Max HP Direct Drive Motor- provides increased power for high performance cutting in hard lumber. Constant Power Technology with Soft Start -maintains constant cutting speed under load and decreases...

Dual Slide Rail System allows cutting up to 12 in. wide boards at 90 deg. Adjustable upfront support brackets for extra support of big work pieces Multi-miter 3-position handle lock at 0, 45 deg. (L) and 45 deg. (R) for comfort and control Dual Bevel capacity 48 deg. left and right; 0, 33.9, 45 deg. positive bevel stops Upfront Bevel Lock allows bevel changes without reaching behind unit Tall Sliding Fences provide extra work piece support Telescoping Extension Wings with Stop Block for additional support 10 Positive Miter Stops (0, 15, 22.5, 31.6, 45 deg. L & R, 60 deg. R) 12 in. 60T Carbide-Tipped Blade with 5/8 in. Arbor